|
| 1 | Maint and servicing of DG sets consisting normal repairs, including replacement of defective/burn out parts by new spares such as oil/diesel filters, gaskets,V belts, Engine oil all as specified,coolent & media, rubber hoses, wornout, clamps, nut and bolts and cleaning of alternator with vaccum cleaner and including greassing of bearing etc and made serviceable complete for the following capacities :-Make : Kirloskar/ Koel Green/CG. Note(i) Checking engine oil level and topping up as and when required .Note (i) Oil shall be measures and paid separately(ii) Checking and adjusting the belt for tension and replacement of belt. Note : Belt shall be measured and paid seperately (iii)Checking of air filter element (iv) Checking of exhaust system for leakage(v) Draining of sediment from fuel filter and fuel tank(vi) Cleaning of air cleaner element(vii) Checking engine alternator coupling, mounting bolts and alignment(viii) Tighting all nuts, bolts, in altenator terminal block(ix) Checking of alternator carbon brush and connections in alternator(x) Checking and tighting of all connection in DC control wiring.(xi) Trouble shooting of any type of fault in DG set through out the contract. Clearing of fault and testing complete. (a) Upto 30 KVA |
| 2 | (b) 30KVA to 63KVA |
| 3 | Supply only diesel filter (Primary and baby) element as per exisitng make and size with O Ring for the following capacity of DG Sets :-(a) Upto 30 KVA |
| 4 | (b) 30KVA to 63KVA |
| 5 | Supply only engine oil filter element as per exisitng make and size with O Ring for following capacity of DG Sets :-(a) Upto 30 KVA |
| 6 | (b) 30KVA to 63KVA |
| 7 | Supply & fix air filter element for the following capacity of DG Sets :-(a) Upto 30 KVA |
| 8 | (b) 30KVA to 63KVA |
| 9 | Supply & fix fan belt of alternator/radiator for the following capacity of DG Sets :-(a) Upto 30 KVA |
| 10 | (b) 30KVA to 63KVA |
| 11 | Supply & fix rubberhose pipe set suitable upto 01 mtr long for water linecircuitcomplete with clamps, for following capacities of DG sets against item No1 before in before. (a) Upto 30 KVA |
| 12 | (b) 30KVA to 63KVA |
| 13 | Supply and fix in Repairs newPVC insulated multistranded, copper conductor70 sqmm multistranded of 1.25 mtr long each duly fixed with brass clamps, copper lugs suitable for DG sets installed at different locations from battery to starter as battery leads. |
| 14 | Supply only engine oil, multi grade 15W40 for topping up OR pouring in engine of DG sets against item No1 before in which labour portion of fixing the item is included draining out the existing old unserviceable oil. Make :- Indian oil / Hindustan petroleum / Castrol / Volvoline. |
| 15 | SupplyPetroleum jelly in 01 kg sealed plastic containersof 1kg each and applying in the battery terminals of the DG sets all as directed. |
| 16 | Supply only distilled water for topping up in the batteries all as directedagainst item No1 before in which labour portion of fixing the item is included. |
| 17 | M&L for in replacementRubber Coupling with nut bolt & washer in between Alternator& Engin& up to 63KVA DG SET |
| 18 | Strip opening carefully of the existing FIP and injectors and transporting to an service centre for servicing / calibrating including petty repairs to makethe FIP functional upto 30 KVA DG Set complete. |
| 19 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised iron strip 32X6mm thickness by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate connected to earthing test point all as specified or indicated including testing on completion. |
| 20 | Repairing to the broken door of the DG set of any capacity with necessary works such as weldinghinges fitting, locking and painting to existing match where required all as directed. |
| 21 | Supply only coolent media for radiator assembly of specified grade. |
| 22 | Supply and fixing in replacement change over (Off Load/On Load type) switch 4 pole, 415 V, 65 Amp all as directed by Engineer-in-charge. |
| 23 | Supply and fixing in replacement start/stoping solenoid of the DG set of capacity up to 63 KVA |
| 24 | Supply and fixing in replacement emergency switch of DG set of any capacity all as directed. |
| 25 | Supply and fixing in replacement start key/ignition switch/emergency switch of DG set of any capacity all as directed. |
| 26 | Supply and fixing in repair diesel pipe of any DG set upto 1meter as directed. |
| 27 | Draining out the Water from engine ofradiator , dis-mantling the leakingradiator assemblyfrom the engine body of 20 KVA DG set, transporting to workshop, cutting the bottom chambers, repairing the damaged pipes, brazing theleaking portions ,descaling / clearing all the blocked pipes including repairing the fins, brazing the bottom chambers, testing the radiator for leakages, transporting the same to the site and re-fixingand testing complete in the presence ofEngr-in-charge. |
| 28 | M&L for cleaning for fuel tank both internally and externally by removing all the dust/sadiments etc including painting of tank,writing of tank capacity, date of cleaning and next due date for tank to be cleaned for following capacity of DG sets including necessary repair works if leackage of oil noticed and all as directed :-(a) Upto 30KVA |
| 29 | (b) 63KVA |
| 30 | Dismantling the existing unserviceable battery, supply and fix newlead acid battery 12 Volts 100 AH ( heavy duty with electrolyte indicator float includinginitial charging of the battery connecting up complete all as specified and as directed. |
| 31 | Labour only for attending breakdowns of DG sets through skilled technician from reputed service centre of DG sets with necessary tool kits, checking Engine and alternator for defects, carryout necessary repairs works to rectify the defects without major overhauling/opening of Engine or Alternators, replace of external spare to repair/rectify the defects and testing DG set for its smooth functioning on full load all as specified and directed by Engr-in-Charge. Note :1.Necessary spares required to rectify the defects shall be measured and paid separately under relavant items.2.The complaint shall be attended and rectifed within 24 hrs form time of reporting by Engr-in-Charge or his auth representative.3. Any Major defects shall be reported on Priority to Engr-in-charge to avoid undue delay in fuctioning of installation.\" |
| 32 | M & L for taking out burnt out winding and rewinding the Self startor coil,of any type withcopper enameled wire including other minor repairsreplacement of solenoid field coils and testing and refixing the Self startor after repair with alignment rotor with shaft and coupling, Copper enameled wire, lumex paper, glass wire varnish and cotton tape etc with all required accessories for 320/250 /125 KVA DG sets including necessary electrical and earthing connections complete all as spedcifiedand as directed. |
| 33 | S & F fuel pipes with benjo bolt and washers for fuel pipe up to capacity63 KVA DGset complete all as directed by Engr-in-charge. |
| 34 | Supply and fixing in replacement Power contactor 3 phase, 4 pole32Ampall as specified by Engineer-in-charge. Make : L&T/C&S/Schneider |
| 35 | Supply and fixing in replacement Power contactor 3 phase, 4 pole25Ampall as specified by Engineer-in-charge.Make : L&T/C&S/Schneider |
| 36 | Servicing of AMF Panel suitable for 5 KVA DG Set to 63 KVA DG Setincluding cleaning properly with blower, checking of control wiring , replacement of burnt out / damaged wiring connections, calibration of control relay, replacement of control fuses / MCBs allas directed by Engineer in Charge. NOTE :- Spare parts shall be measured and paid sepretely in resppective item of thisschedule if required. |
| 37 | Supply and fixing in repair MCCB 63 Amp3 phase, 4 pole, 25 KA ics=icu all as specified and directed as Engineer-in-charge. L&T/Indoasian/C&S |
| 38 | Supply and fixing in repair MCCB 125 Amp 3 phase, 3 pole, 16 KAall as specified and directed as Engineer-in-charge. |
| 39 | Supply and fixing in repair MCCB 160 Amp3 phase, 4 pole, 36 KAall as specified and directed as Engineer-in-charge. L&T/Indo-asian/C&S |
| 40 | Supply and fixing in replacement PLC type controller for AMF panel model no PROCOM ECON-M-322 or equivalant all as directed and specified by Enginner-in-charge. |
| 41 | Supply and laying galvanised iron pipe of size 80 mm bore ofmedium grade with all tube fittings (such as bends, elbows, tees, short pieces of medium grade , connectors, back-nuts,caps, plugs and unions etc.) layingin trenches/ floors/ ducts and also cutting pipes, screwing,and for making forged bends on piping as required includingand complete all as specified and directed. |
| 42 | Supply & laying in repair in trenches of XLPE UG cable insulatedaluminium stranded conductor served with an inner sheathing or PVC tape armoured GI steeel strip and overall PVC sheathed nominal cross sectional area 70 sqmm 4 core and testing complete all as specified and directed. |
| 43 | Making all arrangement for dismantling of Submersible pump set of 2 HP capacity after disconnecting the complete electrical connection and dismantling complete pipes and taking out for workshop for repair/rewinding with suitable size of copper wire, complete all as specified and directed.Make of Submersible Pump : Crompton Greaves |
| 44 | Making all arrangement for dismantling of air blower for STP of 5 HP capacity after disconnecting the complete electrical connection and dismantling complete pipes and taking out for workshop for repair /rewinding with suitable size of copper wire/fill of suitable compessor oil and refixing on same place, complete all as specified and directed.Make of Air Compressor : Air InductorMake of Air Compressor Motor : Crompton Greaves |
| 45 | Repairs to pump impeller for 2-5 HP motor, complete all as specified and directed.Make of Pump : Crompton Greaves |
| 46 | Replacement of pump ball bearing for 2-5 HP pump matching to the existing one, complete all as specified and directed.Make of Pump : Crompton Greaves |
| 47 | Supply only bleaching powder of grade confirming to IS-1065-1989 (2nd Revision) minimum markable chlorine 33.5% by mass packed in HDPE bag of 25 Kg capacity ISI marked, complete all as specified and directed.[Note : (a)The contractor shall produce manufacturers \"Certificate of Compliance\" indicating date of manufacturer in original alongwith every consignment of supply.(b)Test certificate from Govt approved Test Laboratory shall accompany with every consignment of supply to ensure that the materials suppliedare in with conformity with relevant IS.(c) Necessary RV to be prepared & entered in MB for payment.] |
| 48 | Supply and replacing of PVC insulated and PVC sheathed submersible cable of 6 Sqmm 3 core multi stranded copper conductor, complete all as specified and directed. |
| 49 | Excavation in trenches in soft/ loose soil n.exc 1.5mtr wide and not exc 1.5mtr in depth and getting out complete all as specified and directed. |
| 50 | Material and labour for Sand cushioning/ Sand covering using Tibba sand for underground cable protection complete all as specified and directed by Engineer-in-Charge.Note :- For the purpose of payment, only punned thickness witch comes out 18 cm will be measured. |
| 51 | Supply and laying Sub Class \"B\" Bricks Designation 75 as in cable Protection of size 250mmx125mmx50mm complete all as specified and as directed. |
| 52 | Returning, filling, in including spreading, leveling , watering and well ramming in layers n.exc 25 cm in soil complete all as specified and directed by Engineer-in-Charge. |
| 53 | Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 54 | M&L for Taking out Split type AC of capacity up to 1.5 Ton fromthe site and makefor servicing, cleaning with air blower of fins, cleaning of condensing unit, cooling coil and evaporative coilwith caustic soda mix water,taking out all dirt/sludge etc. by usingpressure pump ,cleaning of air filter incl. Oiling and greasing of condensing fan motor, find out leakage of condensor/cooling unit, Replacement of remote cell/battery replacing worn out rubber,bushes/rubber packing rectification of unusual noise. Replacement of minor parts such as nut/bolts,washers etc and reassembly of complete AC unit and testing complete for smooth functioning to entire satisfactionofEngineer-in-Charge. |
| 55 | Supply & charging only of refrigerant (as per existing refrigerant) to Air conditioner of any type, make and capacity complete. |
| 56 | Supply & fixing in replacement of defective PCB card suitable for split/windowAC, any type or size complete. |
| 57 | Supply & fixing in replacement of electric fan/blower motor (copper wounded), AC volt ,single phase with recommended RPM etc suitable for AC of any type and size complete. |
| 58 | Supply and charging only of suitable refrigerant ( as per existing refrigerant) gas for refrigerator/ water cooler of any type, make and capacity complete. |
| 59 | Supply & fixing in replacement of defective electric fan motor (copper wounded), for water cooler of 40/80 cooling capacity complete all as specified and directed. |
| 60 | Supply & fixing in replacement of fan motor (copper wounded) for deep feezer of cooling capacity upto 345 ltrs complete all as specified and directed. |
| 61 | Dismantlingto voltage stablizer upto 5 KVAfor repairincluding assembling , testing after repair work complete all as specified & as directedby Engineer -in-Charge. |
| 62 | Taking down old unserviceable/worn out sub main wiring any size and M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, strandedcopper conductor FRLS cable with continuous copperearth conductor of 4 sqmmin and including PVC casing caping incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.) |
| 63 | Supply and fixed in replacement of sheet metal enclouser with single pole and neutral with a two pin and earth plug and socket complete with one double pole 20 Amp MCB complete. |
| 64 | M&L for Taking out defective compressor Sealed Rotary / Reciprocating unit of split AC of cap 1.5 Tonincl.cutting of copper tubing without any damage to existing other parts and Material and labour for replacement of compressor/ sealed unit complete with erection of compressor in same location with suitable base,jointing of copper refrigerant pipe line,charging of gas to required level,leakage testing,NRV etc. including testing for smooth functioning. NOTE : (i)The rate quoted by the contractor shall be inclusive of all charges like transportation,fittings,etc. complete with necessary guarantee period including oiling and environment friendly gas charging , testing etc.complete all as specified and directed by Engineer-in-Charge. |
| 65 | All as per ser No 64 above but Refrigerator/deep freezer Compressor (235-280 litre) complete all as specifed as directed.Make LG |
| 66 | All as per ser No 64 above but water cooler Compressor (40/80 Ltr) complete all as specifed as directed. |
| 67 | Supply fix in repair electronic refrigerator/water cooler defrost thermostae for LG complete all as specified as directed. |
| 68 | S & F in repair/replacement wiring kit complete suitable for split type AC 1.5 Ton capacity complete with lugs, thimbles and selector switch complete all as directed by EIC. |
| 69 | S&F in repairs/replacement of running capacitor, 45/60 mfd suitable for 1.5Ton capacity window/split type AC of approved make. |
| 70 | S & Fcapacitor 6/10 mfd suitable for split / window type AC. |
| 71 | S&F in repairs/replacement of starting and running relay suitable for window/ split type AC 1.5/2 Ton capacity of approved make complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in repairs/replacement of over load protection relay suitable for window/ split type AC 1.5Ton capacity of approved make complete all as specified and directed by Engr-in-Charge.. |
| 73 | M&L for Taking out u/s drain out pipe of split type AC unit and supply and fix newdrain out pipe of approved makecomplete all as directed by Engr-in-charge. |
| 74 | Supply and fix in repair/replacement of evaporating coil of split type AC of capacity 1.5 Ton all as directed by EIC. |
| 75 | Supply and fix in repair/replacement of condensing coil unit complete of out door unit of split type AC of capacity 1.5 Ton with approved make all as directed by Engineer-in-charge. |
| 76 | M & L for replacement of chocked copper tube of size 1/4\" of split type AC 1.5 ton cap complete all as directed by Engineer-in-charge. |
| 77 | M & L for replacement of chocked copper tube of size 1/2\" of split type ACof 1.5 toncap complete all as directed by Engineer-in-charge. |
| 78 | M & L for insulation coating /PVC air bubling insulation of circular dia to copper tube to upkeep the required temperture and over all protection to copper tubing of size 1/4\" or 1/2\" complete all as directed by EIC. |
| 79 | Replacement ofunserviceable remote with new suitable for machine of 1.5 TR split type AC complete all as specified and as directed by Engineer-in-Charge. |
| 80 | S & F replacement of defective swing motor with new motor suitable for 1.5 ton window and split type AC all as specified and directed by Engr in Charge. |
| 81 | S&F, Push type Bib Tap for water cooler made of brass cromium plated for water cooler upto 120 Ltr capacity. |
| 82 | S&F in repair 3 core PVC insulated copper cable of size 2.5 Sqmm multi stranded complete all as specified and as directed. |
| 83 | M&L for finding out leakage with the pressure testing of the condensor/ cooling unit/ compressor of deep freezer/refrigerator 320 Ltr cap, stop leakage by brizing/soldering including charging withexisting refrigerant to required level and testing the refrigerator for the entire satisfaction of EIC. |
| 84 | Supply and fix Ball brass valves size 15mm, high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-charge. |
| 85 | M & L for replacement of fan blade of water cooler/blower as per existing sample at the ground complete all asdirected by Engineer-in-Charge. |
| 86 | M & L for finding out leakage ofcondensor/ cooling unit of water cooler of 40/80 Ltr cap including dismantling the same for recharging and stop leakage by brazing/soldering including charging with existing gas up to required level and testing complete asto the entire satisfaction of Engineer-in- Charge. |
| 87 | S&F water tray suitable upto 120 Ltr capacity water cooler made of SS and all as per sample. |
| 88 | Supply and fix plug top 15 amps,230 V all as directed by Engineer-in-Charge. |
