|
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.11 sqm but n.exc 0.18 sqmarea of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 3 | M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed |
| 4 | M & L for durastone heavy duty vitrified parking tiles of size 600x600x15 mm thick as in floor set jointed and pointed in neat cement slurry over andincl 20 mm thick screed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 5 | M & L for durastone heavy duty vitrified parking tiles of size 600x600x15 mm thick as in skirting set jointed and pointed in neat cement slurry over and incl 10 mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 6 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 7 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCCtype C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified and as directed. |
| 8 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.. |
| 9 | M & L for rendering 15 mm thick in cement mortar 1:4mixed with water proofing compoundon concrete or brick masonry surfacesand finishing the top surface even and fair complete all as specified and as directed. |
| 10 | Supply only liquid water proofing compound |
| 11 | M&L forrendering 10mm thick plaster in CM (1:6) on brick/blockor concrete surfacesfinished even & smoothcomplete all as specified and as directed. |
| 12 | M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement. |
| 13 | M&L for applying polymer modified cement mortar rendering 15 mm average thick in layers CM 1:3 on concretesurface duly mixing polymer modifier \"Nitobond AR\" of make: M/s Fosroc Chemicals India (P) Ltd. @ 10 Ltr per bag of cement or equivalent in M/s Harjas Coatings & Polymers @ 5% by wt of cement / M/s Pidilite Industries complete finished even and smooth without using extra cement all as specified and as per manufacturer\"s instructions. |
| 14 | M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat ofprimer and including applying plaster of paris putty of 3mm thickness over plastered surface to prepare the surface even and smoothall as specified & directed.Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Pearl), Shallmar (Superla Stay Clean) |
| 15 | M & L for preparation of new surfaces of walland applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litre/ 10 sqm over and including piming coat of exterior primer applied @ 2.20 litrel 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 16 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer all as specified. |
| 17 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litre/ 10 sqm over and including piming coat of exterior primer applied @ 2.20 litrel 10 sqm over old surfacescomplete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 18 | M&L for complete removalof old surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer including applying plaster of paris putty of 3mm thicnesscomplete all as specified and as directed. |
| 19 | M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 20 | M&L for preparation of old plastered surfaces of ceilingand applying two coats of oil bound distemper completeall as specified. |
| 21 | Demolition of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for |
| 22 | M&L Cement concrete type C- 2,1:3:6 (40mm graded aggregate) 75mm thick as in path /hard standing/plinth protectionwith finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 24 | S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240,Medium Grade of any dia complete all as specified and as directed. |
| 25 | S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with grade Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 26 | M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering. |
| 27 | Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as specified |
| 28 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instructionand as directed.Make : JSW Pragati |
| 29 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asin ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.Make : JSW Pragati |
| 30 | M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 31 | Taking down chowkats or framesnot exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame). |
| 32 | M&L for providing and fixing Factory made single rebate WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete in colour as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account. |
| 33 | M&L for providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 34 | S & F100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 including srews |
| 35 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long. |
| 36 | S&F in repairs extruded aluminium alloy handle fabricated type anodised 150mm long. |
| 37 | S&F repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 38 | S & F in repairs Floor Door Stopper of size 70-100 mm of aluminium alloy body and tongue, anodised, with rubber capcomplete all as specified and as directed. |
| 39 | Taking down chowkats or frames exceeding 1.5 sq.m andnot exceeding 4 sqm each with shutters without taking off shutters from the frames and removing off site etc complete all as specified and as directed. |
| 40 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 41 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubularsections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 42 | M & L for repair of old window including taking down leaf replacement of necessary hinges rubber gasket, beading, window section as per existing , handle, screws wherever required to make old window shutter fully functionable complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supply only sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n.exc 0.5 sq.m in each panecomplete all as specified and as directed |
| 44 | Supply only 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each panecomplete all as specified and as directed |
| 45 | Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed |
| 46 | Supply and fix in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed |
| 47 | Supply only particle board, 12 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed. |
| 48 | M&L for powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 49 | Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 25mm including taking down complete all as specified. |
| 50 | - Ditto - all as per item No 49 above, but 32 mm outer dia complete all as specified and as directed. |
| 51 | Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed. |
| 52 | Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed. |
| 53 | Supply and fixing 25 mm outer dia tank Adaptor complete all as specified and as directed. |
| 54 | Supply and fixing 25 mm outer dia union complete all as specified and as directed. |
| 55 | Supply and fixing 25 mm outer dia Brass Tee complete all as specified and as directed. |
| 56 | S & F in repair 50 mm PVC pipe laid in floor or wall with fitting complete all as specified and as directed. |
| 57 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nosfixing bolts incl PVC seat cover but excludingflushing cistern and flush pipe) complete includingmaking good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 58 | Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 59 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long bodywith swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 60 | Supply and fixing in repair10 litre capacity PVClow level valve less syphonic action type flushing cistern, white, with inlet,ball valve, float and handle including brackets, and bends complete all as specified and as directed. |
| 61 | S&F in repairs 600mm x 450mmmirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood fixed to wooden plugs with chromium plate brass screws and cup washers all as specified and directed. |
| 62 | S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets all as specified and directed. |
| 63 | S&F in repairs, 15mm CP 2 Way Bib Cock heavy duty all as specified and directed |
| 64 | S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed. |
| 65 | S & F 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 66 | S&F in repairs PVC flexible waste pipe of 32 /40 mmfor wash hand basin and Kitchen sink |
| 67 | S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 68 | S&Fin repairs stop valves/angle valvecast copper alloy chromium platedwith long shank and cupfancy type screwed down high pressurescrewed both ends for pipe or union fixed for 15mm bore,includingnecessary cuttingand making good wall or floor tiling to match existing(tilesto be paid supplied only rates) etc complete all as specified and as directed. |
| 69 | S&Fbrass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with1 Meter long Easy Flex Tube in Chrome Finish & wall Hook all as specified |
| 70 | S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressurewith long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 71 | Taking down existing roof treatment from roof and cleaning with wire brush to remove all loose particles including loose cement mortar or concreteand washing with water including removing the debris upto 100M distance complete all as specified and directed. |
| 72 | M & L plain cement concrete with type B0 1:2:4 (12.5 mm graded aggregate) asin roof kerbs or mud stops, rounded or chamfered complete all as specifed and directed. |
| 73 | M & L for15 mm thick screed bedin CM 1:3 in roof surfaces mixed with WPC as per manufacture\"s instruction complete all as specified and as directed. |
| 74 | S & F in repairrotational moulded polyethylene water storage tanks 1000 Ltr (cylindrical vertical with closed top) UV protected anti bacteria coating with threaded cover hoisted and fixed in position including dismantling old tank complete all as specified in SSR Part IMake : Vectus-Smart, Prince -Store fit or equivalent |
| 75 | S&F in repair 25 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed |
| 76 | S & F in repair Gun-metal, globe or gate valves, 25 mmwith iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 77 | S & Fin repair Soap Dish with screws complete all as specified and as directed. Model No: Jaquar AKP-35731P complete all as specified and as directed. |
| 78 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed. |
| 79 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified. |
| 80 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified. |
| 81 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 82 | S&F 110 mm bore PVC (SWR) junction single (Single \"T\") equal or unequal with access door complete all as specified and as directed. |
| 83 | S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 84 | S&F 75 mm bore PVC (SWR) junction single (Single \"T\") equal or unequal with access door. |
| 85 | S&F 75mmPVC (SWR) vent cowl, complete all as specified and directed |
| 86 | S&F 100mmPVC (SWR) vent cowl, complete all as specified and directed |
| 87 | S&F PVC (SWR) floor trap, 75mm dia plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 88 | S&F in repair CP Waste coupling for Sink/WHB complete all as specified and as directed. |
| 89 | S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and as directed.(Make : Cat No FUS-29273UPR of Jaquar/T0621C of Johnson/272200190011 of Somany) |
| 90 | S&F Temperature resistant PVC connection pipe with brass hexagonal adaptor both sides suitable for HOT/COLD water, 15mm dia, not less than 60cm long, suitable for incoming and outgoing water connections of geyser with washers etc,complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F in repair 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed. |
| 92 | S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and as directed. |
| 93 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified. |
| 94 | M&L 100 mm thick plain Cement concrete (1:4:8) type C-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and as directed. |
| 95 | M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment complete all as specified & directed. |
| 96 | M&L for taking down carefully existing aluminium point wiring (light, fan, socket or power) complete fittings fixture such as switches Ceiling roses, pendents,regulators, sockets etc to be measured separately)unscrewing from Board/outlet boxes, fittings & fixtures such as switches, sockets, ceiling rose lamp holder tube/ceiling fitting, bulk head fittings, tube lights & regulator etc and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. |
| 97 | M&L for taking down carefully existing old DBs and making good disturbed surfaces of walls to match the existing surfaces complete all as specified and as directed |
| 98 | M&L for taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified and as directed. |
| 99 | M&L for point wiring (modular type) with two run of PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm (FRLSH), PVC conduit medium grade/ PVC casing caping and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc)and drawing one run of 1.5 sqmm PVC insulated unsheathed multistranded copper conductor cable (FRLSH) as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and as directed by Engr-in-Charge.(In ceiling Portion surface conduit wiring shall be carried out.) Note: The quoted rate inclusive for the following :- (a) GI metal flush box and Modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS Specification. (c) wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. |
| 100 | One light/fan point controlled by one one way switch. |
| 101 | One 3 pin socket outlet 5/6 Amps independent. |
| 102 | One 3 pin socket outlet 5 Amps on the same board with other switches |
| 103 | All as per item No 99 above but cable with 4.0 sqmm size for socket outlet 15 amps, independent. |
| 104 | M & L for submain wiring with two single core PVC insulated unsheathed multistranded copper conductor cable of size 6 sqmm (FRLSH) and one single core PVC insulated unsheathed multistranded copper conductor cable green colour of size 6 Sqmm (FRLSH) as earth lead in and including concealed with PVC conduit medium grade of suitable size or surface wiring with PVC casing caping of suitable size and making good the disturbed wall surfaces to match with existing specification including takind down unserviceable submain wiring complete all as specified and as directed.Note : (i) Three run of cable with one run of PVC conduit/PVC casing and caping will be measured as one length.(ii) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement. |
| 105 | All as per item No 101 here-in-before but with 1.5 sqmm cable complete all as specified and as directed. |
| 106 | S&F ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed. |
| 107 | S&F modular switch one way 6 Amps, 1 module complete all as specified and as directed |
| 108 | S&F modular switch one way 16 Amps, 1 module complete all as specified and as directed. |
| 109 | S&F modular socket, 2/3 pin 6 amps, 2 module complete all as specified and as directed. |
| 110 | S&F modular socket, 2/3 pin 6/16 amps, 2 module complete all as specified and as directed. |
| 111 | S&F LED lights fitting 20W, >120lm/watt, CCT value 4000K to 6500K, surge protection of 2 KV, 4 feet 220V, AC IP-20, aluminium housing with inbuilt driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 112 | S&F LED 20W inverter batten type fitting 3/4 feet long aluminium extruded housing, charging time 10-12 Hrs with 04 Hrs backup,IP-20 ,rated voltage 230 V, 50 Hz, system wattage 20W +/- 10%, system current less than 102 mA, power factor more than 0.95, system lumen efficiency 100lm/watt,CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% complete all accessories prewiredand connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 113 | S&F LED bulb 9 watt, B22 complete all as specified and as directed |
| 114 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 115 | Supply & fixing BLDC ceiling fan 1200mm sweep with blades, suitable electronic remote as per OEM design, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor (BLDC) of wattage < 28W including provision of cable from ceiling rose/connector to fan including taking down unserviceable ceiling fan and deposited to MES store yard complete all as specified and as directed. |
| 116 | Supply & fixing exhaust fan made of metallic body complete with louvers, voltage 230V, 50 HZ, RPM 900, sweep 300mm and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastner and provision of cable from ceiling rose/connector to fan complete all as specified and as directed. |
| 117 | Supply & fixing Air circulator wall fan heavy duty 450mm, single phase, 230V shall be fixed with suitable size of buzzer bolt/hold fastner including making hole to the wall surface of any type/girth and at any height for fixing of air circulator fan including making good disturbed surface with existing wall colour and provision of cable from ceiling rose/connector to fan complete all as specified and as directed. |
| 118 | Supply & fixing sheet metal enclosure with TPN MCB DB\"s 4 way, double door type IP-54, IK-09 Protection. Isolated Neutral, Door earthing, with suitable rated bus bar as per OEM design including suitable size of copper ferrules for fixing of cable complete all as specified and as directed. |
| 119 | Supply & fixing MCB DB\"s SPN 8 way, IP-54, IK-09 double door, sheet metal enclosure, 240V, suitable rated bus bar as per OEM designincluding suitable size of copper ferrules for fixing of cable complete all as specified and as directed.Note for item srl No 115 & 116 :(i) MCCB and MCB will be measured and paid separately.(ii) The cost for flushing of Distribution box in any type of wall and making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate. |
| 120 | S&F MCB TPN 40 to 63 Amp, C series, 415V, 10 KA complete all as specified and as directed. |
| 121 | S&F RCBO 40 Amps, double pole 240V, AC type, 30 mA complete all as specified and as directed. |
| 122 | S&F MCB SP 6-32 Amps ,10 KA, B Curve, 230 Volts ,50 HZ complete all as specified and as directed. |
| 123 | Supply & fixing very high efficiency round highbay in PDC housing 120 W, ingress protection IP66 with additional safety chain including 10 KV SPD complete all as specified and as directed. |
| 124 | S&F LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 2500 lumens suitable wattage for efficiency not less than 120 lumens/watt having secondary optics min wattage 25 watt with ingress protection IP 65/66 and potted electronic driver of minimum IP 67 with THD less than 10% CRI>80, P.F>0.95, CCT 5700K, IK>08 SPD of capacity 10 KV and testing on completion complete all as specified and as directed. |
| 125 | M&L for GI bracket for street light fitting made out of 25 mm bore pipe ISI marked light grade GI tube bent to shape required not less than 1.20m long fixed with and including MS flat iron clamps made out of 25x3 mm GI flat, bolts, nuts and washer etc., complete all as specified and as directed. |
| 126 | Material and labour for earthingwith galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 4 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe \"light grade\" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1,pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe medium grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testingcomplete all as specified and as directed by Engineer-in -charge.NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover.(ii) If the desired earth resistance is not achive during testing as per IS the complete earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissable. |
| 127 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size25 sq mm 3½ core complete all as specified and as directed. |
| 128 | Supply, laying of telerex DWC (Double wall corrugated) HDPE pipe confirming to IS 16205 (Part - 24 - 2018) of outer dia 40mm and inner dia 32mm polyethylene including coupler, bends, cap etc., with smooth ineternal and profiled internal and profilrd external surface for non pressure under ground cable complete all as specified and as directed. |
| 129 | M&L for Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe line and getting out in hard/dense soil complete all as specified and as directed. |
| 130 | M&L for Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as specified and as directed. |
| 131 | M&L for Removing excavated material in soils n exc.50m and deposting where directed at a level n exc.1.5m above the starting point all as directed by Engr-in-charge. |
| 132 | Supply, laying of GI tube light grade galvanised with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of 50mm dia complete all as specified and as directed. |
| 133 | Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe in any type of soil and getting out complete all as specified. |
| 134 | Returning filling in including spreading, levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed |
| 135 | M&L for Removing excavated material in soils n exc.50m and deposting where directed at a level n exc.1.5m above the starting point all as specified and as directed. |
| 136 | Taking up or down steel tubing and connection including cleaning for refixing or removal in store all as specified and as directed of following size : |
| 137 | 25 mm bore |
| 138 | 20 mm bore |
| 139 | 50 mm bore |
| 140 | Supply & laying in repairs GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ ceiling/floor complete all as specified and as directed for the following size : |
| 141 | (a) 25 mm bore |
| 142 | (b) 20 mm bore |
| 143 | (c) 50 mm bore |
| 144 | Supply and fixing Gun metal globe or gate valves, confirming to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position including taking down unserviceable gate valve complete all as specified and as directed for the following size : |
| 145 | 25 mm bore |
| 146 | 20 mm bore |
| 147 | 50 mm bore |
| 148 | Supply and fixing rotational moulded polyethylene water storage tanks 1000 ltr capacity (Cylindrical vertical with threaded closed top) triple layer ISI marked hoisting & fixed in position complete all as specified and as directed |
| 149 | M&L for PTMT float valve suitable for 20mm bore GI tubing high pressure with high density plastic ball with epoxy coated aluminium rod screwed for iron pipe and fixed complete all as specified and as directed. |
| 150 | M&L for surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose of soil, all as specified. |
| 151 | M&L for cement concrete type C- 2,1:3:6 (40mm graded aggregate) 100 mm thickwith finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 152 | S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 153 | M & L PCC 1:4:8 type D2 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 154 | M&L for providing precast cement concrete solid building blocks orsetting in mortar with type B1 1:2:4 (20 mm graded stone aggregate), setin cement mortar in CM 1:6 complete all as specified and directed. |
| 155 | M&L for Hardcore of gauge n exc. 63 mm, with broken stone aggregate deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as direced |
| 156 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fairwithout using extra cement complete all as specified and as directed. |
| 157 | M&L Preparation of newly plastered surfaces of wall & applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over a coat of putty complete all as specified and directed. |
| 158 | S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165complete all as specified. |
| 159 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instructionand as directed. |
| 160 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instructionand as directed. |
| 161 | M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering. |
| 162 | M&L for returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed. |
| 163 | M&L for removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 164 | M&L for MS Steel for hook and base plates complete all as specified and directed |
| 165 | M & L for Preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red-oxide primer complete all as specified. |
| 166 | S&F Fire bucket 09 litres capacity made of galvanized mild steel, painting with two coats of white paint on the inside and two coats of red paint on the outside with black paint for the handle and ears. The word \"FIRE\" should be painted in black on the outside complete all as specified and as directed. |
| 167 | S&F AFFF Fire Extinguisher 9 Kg capacity of following specifications complete all as specified and as directed.Agent Category - CF001128S/AFFFAgent - Water + 6% of KV foam 3% C-6Minimum bulk range throw (as per IS 15683) > 2 metersDischarge Mechanism - Squeeze gripApllicable on fires - A, B, F & ESFIS 15683 rIating - 4A, 233B, 75FInternal & External coating - Epoxy polyester powder Working Pressure - 15 BarCylinder Material Specification - Steel CR2 (DC01)Operating temperature - 50C to 600CBody thickness - 1.4mm |
| 168 | S&F ECO-50 fire extinguisher 9 Kg, CO2trolly type red class C, designed to suppress and extinguish small to moderate fires in their early stages. Fire extinguisher consists of a cylindrical container made of steel or aluminium. The container should equipped with a discharge nozzle and a handle or lever for easy operation complete all as specified and as directed. |
| 169 | S&F ECO-50 fire extinguisher 9 Kg, CO2trolly type red class B, designed to suppress and extinguish small to moderate fires in their early stages. Fire extinguisher consists of a cylindrical container made of steel or aluminium. The container should equipped with a discharge nozzle and a handle or lever for easy operation complete all as specified and as directed. |
