|
| 1 | Demolition of cement concrete (un-reinforced) of any description & in any position not specifically providedcomplete including dismantling of floor tiles etc complete all as specified. |
| 2 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified. |
| 3 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L for cement concrete(1:2:4) type B-2 (using 40 mm graded stone aggregates) 75 mm thick as in sub base of flooring/tiles etc completeall as specified. |
| 5 | M&L for cement concrete(1:2:4) type B-0 (using 12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring/tiles etc completeall as specified. |
| 6 | Providing, cement concrete Type B0 1:2:4 (12.5mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 7 | M&L for Cement concrete 1:5:10 type E-2 using 40mm graded brick aggregates as in sunken portion of Bath/WC etc complete all as specified. |
| 8 | M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet including applying first layer of cement slurry @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.253 Kg/Sqm (the layer shall be allowed to air cure for 4 hours followed by water curing for 48 hours). 2nd layer acrylic based polymer modified cementious composite compound slurry after air of 1st coat for 4 hours, as per manufacturer\"s instruction complete all as specified Note: WPC will be measured and paid separately. |
| 9 | Material and Labour for bitumen blown any grade applied hot two coats, to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed. |
| 10 | Material and Labour for polythene film black 50 micron laid in floors and walls complete all as specified and directed. |
| 11 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4)for bedding of tilescomplete all as specified. |
| 12 | M&L for Non - skidcoloured Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.Note :- Tile will be fixed with tile spacer and gape will be filled properly with white cement/ epoxy or equavalant mtrl to match the tile and gouting. |
| 13 | M&L for backing coatwith cement mortar 1:4, 10mm thick on fair faces of brick work or concrete surfaces to receive wall tiles/ dado complete all as specified and directed. |
| 14 | M&L for Glazed ceramic colouredtiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified. |
| 15 | Removingbldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed. |
| 16 | M&L for rendering 15 mm thick in cement mortar (1:4) onbrick work or concrete surfaces in sunken portion/wallsfinished even and smooth (without using extra cement) complete all as specified. |
| 17 | M&L for 5mm thick plastering in CM 1:3on fair faces of concrete surfaces (ceiling surfaces) finished even and smooth w/o using extra cement |
| 18 | Supply only intergral water proofing compound ISI Marked complete all as specified. |
| 19 | M&L for preparation ofnewly plastered or unplastered/undecorated surface of wall and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified. |
| 20 | M&L for Preparation of old decoratedsurafces by Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying two coat of oil emulsion distemper(white/tinted) over 3mm thick wall care putty wherever required on internal walls surfaces complete all as specified and directed. |
| 21 | Dismantling of cast ironpipe up to 100 mm dia, jointed in cement mortar including taking out/down in trenches/Wall if required etc complete all as specified. |
| 22 | S&F 100 mm bore Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified. |
| 23 | S&F 100 mm bore Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, fixed to wall complete all as specified. |
| 24 | S&Fin repair 100 mm bore cast iron Bends of (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified. |
| 25 | S&F in repair 100 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 26 | S&F in repair Salt-glazed stoneware gully traps (100X100) mm, square or round mouthed, type \"P\" complete all as specified. |
| 27 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. complete all as specified. |
| 28 | All as per item No. 27 here-in-before but 20mm dia . |
| 29 | Cutting chases, pinning in. making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthin brick wall etc complete all as specified. |
| 30 | Supply & laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 31 | S & F in repair 15 mm dia stop valve/angle valve, cast copper alloy screwed down high pressure, fancy type chromium plated screwed both ends for iron pipe or unions complete all as specified. |
| 32 | Supply & fixed in repair vitreous china wash down water closet pan (pedestal pattern), white connecting to trap and to flushing pipe front or back inletetc complete all as specified and directed. |
| 33 | Supply and fixed in repair forPlastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed. |
| 34 | Supply and fixed in repair PVC valveless, syphonic action type flush tank in repair,10 litre capacity with inlet ball valve, float & handle including brackets complete etc complete all as specified and directed. |
| 35 | Supply and fixed in repairHealth faucet ABS Body mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and brass wall hook including making connections and fixed in position complete all as specified and directed. |
| 36 | Supply and fixed in repair PVC connection 15 mm size with PTMT nut of length 600 mm,complete all as specified and directed. |
| 37 | Supply and fixed in repair Bib taps 15mm borechromium plated cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrulo and fixedcomplete all as specified and directed. |
| 38 | S&F in repair forin CPVC 20mm Brass Elbow (3/4 x 1/2) |
| 39 | S&F in repairfor in CPVC 20mm Brass Tee |
| 40 | S&F in repairfor in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) |
| 41 | S&F in repair for in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) |
| 42 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 43 | Supply and fix in repair 75 mm PVC(SWR) Bend |
