|
| 1 | Excavation in trenches in any type of soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes, piers, shafts etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed. |
| 2 | Demolition ofbrickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level)and removing the debris to a distance not exceeding 100 mtr complete all as specified and directed |
| 4 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed hard granitestone aggregate asin foundation, filling mass concrete complete all as specified and directed. |
| 5 | M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius,built in cement mortar 1:6 complete all as specified and directed . |
| 6 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping, bed blocks and similar worksincluding slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick in cement plaster 1:4 on surface other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 8 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of white wash complete all as specified and directed . |
| 9 | M&L for demolition of reinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed |
| 10 | M&L for RCC 1:2:4,type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , shelves and chajjas complete all as specified and directed. |
| 11 | M&L for Mild steel TMT bars8mm to 10mm dia , cut to length, bent to shape as required, including cranking, bending and binding with& including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed . |
| 12 | Removing excavated material or surplus soil not exc 50 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .Note :-A Sum of Rs. 30,250.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 16 (Schedule of credit) of Tender Documents. |
