|
| 1 | fo|qr uxjh; forj.k [k.M&cqyUn\"kgj ds dk;Z{ks= esa fo0u0fo0m0[k0&r`rh;] cq0’kgj ds vUrxZr fofHkUu 33@11 ds0oh0 fo|qr midsUnzksa ds ifjpkyu ,oa vuqj{k.k o \"kklu dh ea\"kkuqlkj fo|qr vkiwfrZ O;oLFkk lqpk: j[kus gsrq vkdfLed nq?kZVukvksa esa {kfrxzLr o VsM+s&esM+s 33 dsoh ,oa 11 dsoh fo|qr iksyks dks cnyuk@lh/kk djus] {kfrxzLr ,0ch0lh0] VwVs rkj o ØkWl vkeZ bR;kfn cnyus laca/kh dk;ZA |
| 2 | fallowings work carried at site. |
| 3 | S.T Pole 13 Mtr. Long |
| 4 | S.T Pole 11 Mtr. Long |
| 5 | PCC Pole 8.5/9 mtr Long. |
| 6 | Carriage of All line Material from store center BSR to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc. |
| 7 | Erection of Single pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work. |
| 8 | Erection of Double pole/Scation Pole support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work. |
| 9 | Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work. |
| 10 | Grouting of Double pole support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work. |
| 11 | Carriage of All line Material from J.E store Sub station to Pit Site ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc. |
| 12 | Cutting /drilling /Welding of MS Angle iron for making guarding angle size 65x65x6/50x50x6 mm including the work of fixing the bracket on PCC/ST pole for construction of the line. |
| 13 | Making/Filling of 11 Kv Cable Jointing kit Varius size XLPE cable |
| 14 | fixing of 11 Kv Stay rod with Stay wire in proper way with Nozelling |
| 15 | Tighting of 11 Kv Stay rod with Stay wire in proper way |
| 16 | Grouting of 11 Kv Stay rods |
| 17 | ACSR weisal conductor |
| 18 | ACSR Rabbit/Dog conductor |
| 19 | ABC Cable 3*50 Square MM |
| 20 | ABC Cable 3*95/120 Square MM |
| 21 | Fixing of Earthing rod |
| 22 | Fixing of pin insulator |
| 23 | Fixing disc insulator |
| 24 | Fixing of Toff Channel/ Cross Arm |
| 25 | Providing and fixing of Holding clamp. |
| 26 | Providing and fixing of F Clamp |
| 27 | Providing and fixing of LT Clamp |
| 28 | Providing and fixing of J hook |
| 29 | Providing and fixing of Stay clamp |
| 30 | Providing and fixing of Dead & clamps |
| 31 | Providing and fixing of Stay insulator |
| 32 | Providing and fixing of Suspension clamps |
| 33 | Providing and fixing of LT Insulator |
| 34 | Providing and fixing of Bolt & nut off size. Please Enable Macros to View BoQ information |
