|
| 1 | (A) Civil work |
| 2 | Concrete with 4cm. gauge brick ballast, coarse sand of 2.20 F.M and cement in proportion of 8:4:1 in foundation and under floors, including supply of all materials, labour, T&P etc. required for proper completion of the work.(SI.No.275/2022) |
| 3 | Providing & laying of interlocking concrete Block Pavement having thickness 80mm as per drawings and technical specification Clause 1504 (Exclusive GSB) (SI.No. New Item 14) |
| 4 | Cement concrete with 2cm gauge approved stone grit, coarse sand & cement in proportion of 1:1.5:3 in cc pavment (thickness as per design) cement coarse & fine aggregate confirming to IS standred mixed in concrete mixer/plant of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed from work(steel channel) laying & fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work spreding the concrete with shovles. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion cloth for curring of concrete pavments for not less then 14 days, curing compound (Where specified) and water finishing to lines and grade includings supply of all materials, labour Tools &plants etc. required for proper completion of work and also includin complete shifting of Recron 38 fibre reinforcement materials etcl & concrete etc S.I. No. New Item 9/2022 |
| 5 | M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all material, labour T&P etc. required for proper completion of the work as per direction of the work as per direction of Engineer-in-charge.(SI.No.305a/2022) |
| 6 | Concrete with 2cm. gauge stone grit, coarse sand of 2.20 F.M and cement in proportion of 4:2:1 in foundation and under floors, including supply of all materials, labour, T&P etc. required for proper completion of the work.(SI.No.279a/2022) |
| 7 | 12MM thick plaster in 1:4 with cement and fine sand of 1.25 fineness modules mortor. (S.I. No 584/2022) |
| 8 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). S.I. No 708/2022 |
| 9 | Finishing wall with 2 coats weather paint of approved make & quality on new work with two coats to given an even shade including supply of all material, labour, tools and plant etc. required for completion of the work.[SI No. new items of Ch-15] |
| 10 | (B)Machine Establisment |
| 11 | Supply and installation of Situp station-Dimension 1500x1150x1300mm complete in all respect as per direction of Engineer in charge. |
| 12 | Supply and installation of Horse rider station-Dimension 1000x600x1100mm complete in all respect as per direction of Engineer in charge. |
| 13 | Supply and installation of Exercise bar-Dimension 1800x550x1700mm complete in all respect as per direction of Engineer in charge. |
| 14 | Supply and installation of Seated Chest pres-Dimension 1800x700x2000mm complete in all respect as per direction of Engineer in charge. |
| 15 | (C) Park Amusement |
| 16 | M & L for providing SEE SAW (2 seater) size 2400 mm long seat to seat x 1800 mm wide x 400 mm height (above the ground) frame is made of MS pipe 50 mm dia nominal bore Heavy class. Seating beam is of MS pipe Heavy class laid by MS sheet 18 SWG of 300 mm dia and its handle and \"C\" type cantilever is made of MS pipe 20 mm dia nominal bore Heavy class. This seating beam is fitted with the frame complete including fixing of vertical members in cement concrete block of size 45 cm x 45 cm x 45 cm of ration 1:2:4 type B-1. The rates includes for cost of cement concrete blocks and applying of priming with red oxide primer and painting two or more coats of Duco paint of approved quality in multicolor on all steel surface compete. Including all tax. |
| 17 | M&L for providing chain swing of size 3000 mm long 2700 height (above ground) frame is made of MS pipe 50 mm dia nominal bore Heavy class which stay with MS pipe 25 mm dia nominal bore Heavy class frame is connected with MS Rod 25 mm dia shaft having fabricated housing made of MS flat 50 mm x 6 mm fatten with ball bearing No 3204, shaft is further connected with MS chain 6 mm thick having 2 Nos. sitting seat made of MS pipe 15 mm dia nominal bore Heavy class and laid by Ms sheet of 200 SWG complete includes for fixing in cement concrete block of 45 cm x 45 cm in 4 legs of ratio 1:2:4 type B-1 The rates includes for cots of Duco paint of approved quality in multicolor on all steel surfaces complete. Including all tax. |
| 18 | M & L for providing slide 3600 mm long x 450 mm wide 1500 mm height (above the ground) slide is made of stainless steel sheet 15 SWG grade 304 reinforced with 18 Gauge Gl sheet riveted together mounted on M.S Jangle 40 mm x 40 mm 5 mm slide 2 numbers vertical support of M.S pipe 25 mm dia nominal bore Heavy class ladder is made of M.S Pipe 25 mm dia nominal bore Heavy class and its railing is made of M.S pipe 20 mm dia nominal bore Heavy class. Ladder having climbing Nos. steps made of MS Pipe 15 mm dia nominal bore Heavy class at equal spacing not more than 380 mm c/c including fixing the vertical members in cemented concrete blocks 1:2:4 type of size 45 cm x 45 cm. the rates includes for cost of cement concrete blocks and applying of priming with red oxide primer and painting two or more coat of Duco paint of approved quality in multicolor on all steel surfaces complete. Including all tax. |
| 19 | M & L for providing Bridge ladder of size 4600 mm long x600mm wide 1800 height (above the ground frame i made of MS Pipe 50 mm dia nominal bore Heavy class and climbing steps is made of MS pipe 20 mm dia nominal bore Heavy class including foing the vertical members in cement concrete block of size 45 cm 45 cm x 45 cm in 4 legs of ratio 124 type B-1. The tales Nos Includes for cost of cement concrete block and applying of priming with red oxide primer and painting two on more coats of Duco paint of approved quality in multicolor over all steel surfaces complete Including at Bax |
| 20 | M&L for parallel bars of approved make legs made of 50 mm dia nominal bore MS Pipe medium class, 1200 mm above ground with 32 mm dia nominal bore MS Pipe base 2100 mm long complete all as specified and directed (2 Nos) The pipe shall be embedded in cement concrete block 1:24 tvpe B-1 up to 300 mm height of Nos size 45 cm x 45 cm. The rates includes for cost of cement concrete blocks and applying of priming with red oxide primer and painting two or more coats of Duco paint of approved quality in multicolor on all steel surfaces complete. Including all tax |
| 21 | M & L for climber main frame made of 40mm pipe area 4x4x8 fit base frame of 40x40x6 angle iron approved quality in multicolor on all steel surfaces complete. Including all tax |
| 22 | M & L for merry go round made of 50mm square ma pipe and 25mm dia m.s. pipe platform 5 fit dia approved quality in multicolor on all steel surfaces complete Including all tax |
| 23 | P/F of stainless steel (Grade 304) bench both sides of garden bench are made of having back height of 720 mm and seating height of 390. SOR 2022 10.27(New item) |
| 24 | (D) Water cooler. |
| 25 | Providing and placing on terrace polyethene water tank IS1 12701 marked (sintex or equivalent with cover and storage suitable locking arrangement and making necessary holes for intel outlet and over flow pipes but without fitting and the base support for tank complete as per direction of engineer in charges. S.I. No 21.11/2022 |
| 26 | Installlation and fixing of water cooler/sanitry fittings with one plumber with labour work in Engineer-in-charge.(S.I.No. 202+205/2022)SOR |
| 27 | Providing and fixing CPVC pipe having thermal stability for hot & cold water supply including all CPVC plain & brass threated fittings this includes jointing of pipes & fitting with one step CPVC solvent cement trenching refilling & testing of joints complete as per direction of engineer-in-charge 25mm dia. S.I. No. 21.02(b)/2022 |
| 28 | M.S. iron work in small size & section such as holding down bolts hold fast tie rods grating etc. in door window frame & greating etc. wrought to required from including supply of steel bolts nuts and locks wastage etc and their fixing required for proper completion of the work but M.S. Grill/Stair case railling/gates/trusher/racks etc. direction of engineer-in-charge as S.I. No. 502(a)/2022 |
| 29 | Supply and fixing of 1\"*2\" size guage wire welded mesh murga jali in all around of water storage tank complete all as per S.I. No. 20 k(iv)/2022 |
| 30 | Painting roofs or other iron work in large areas with 1 coat priming and 2 coat of approved paint including supply of all materials labour tools and plants etc.required for proper completion of the work. Paint to be used ISI marked above but for every coat after the first coat direction S.I.No.......644+645/2022 of engineer in charge |
| 31 | Loading/unloading and transporatation in water cooler to head 7 office Muzaffarnagar to proper site. (Cartage+two labour) |
| 32 | Supply of water cooler 150 Ltr capacity Steel body by ISI marked 8 complete as per direction of engineer in charges. Includung GST. Rates by Gem |
| 33 | (E) Electrical. |
| 34 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect as per direction of E/I. etc (S.I No.652/2018) |
| 35 | Supply and laying of aluminium insulated armoured served sheathed cables 1100 Volts conductor PVC grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.5. clamps etc. of suitable size. The armouring of the cable shall be properly connected with the earth conductor by clamps etc complete in all respect as per direction of E/I etc (S.I No 501 (H)/2018 10 sq. Mm 4 core) |
| 36 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect as per direction of E/I etc. (Which are registered and approved at least by PWD) (S.I No 1454/2018 CAT-AAA) |
| 37 | Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the coast of G.I. pipe and G.I. Wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc.as per directions of engineer-in-charge complete in all each respect.(SI.No.704/2018) |
| 38 | S/F of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.(SI.No.504C/2018) SOR |
| 39 | Supply and fixing of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 5 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with Cts etc. in case of TPN complete in all respect. 40 amp TPN (S.I. no 807 c(ii)/2018) Please Enable Macros to View BoQ information |
