|
| 1 | Schedule A (Part-I) |
| 2 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil & removing the debris to out side MD land all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out soft/loose soil |
| 4 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundations all as specified and directed. |
| 5 | Brick work with common burnt clay modular brick of cl designation 7.5 in foundation and plinth in cement mortar 1:6 |
| 6 | Provinding and laying DPC 40 mm thick with cement concerete 1:2:4 |
| 7 | Filling available excavated earth in layers not exceeding 20 cm in depth with lead upto 50 mtr and lift upto 1.5 mtr all kinds of soil. |
| 8 | Supplying and stacking at site and laying and compacting 63 mm 245 mm size stone aggregate. |
| 9 | Providing and laying PCC 1:3:6 40 mm nominal size drive from natural sources |
| 10 | Cement concrete flooring 1:2:4 finish with protien coat of neat cement, incl cement slurry but excluding the cost of nosing of steps 40 mm thick with 20 mm nominal size stone aggregate. |
| 11 | Making Plinth protection 50 mm thick of cement 1:3:6 including necessary excavation, leveling and dressing and finish the top smooth. |
| 12 | Providing and laying ceramic glazed floor tiles of size 300 x 300 mm |
| 13 | Providing and fixing 1st Quaterly ceramic glazed wall tiles (size 200 x 300 mm) |
| 14 | Providing and laying PCC 1:3:6 |
| 15 | 15 mm Cement plaster on the rough side of single or half brick wall of mix 1:4 |
| 16 | 12 mm Cement plaster finish with floating coat of neat cement of mix 1 :3 |
| 17 | Providing and laying RCC excl the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level 1:2:4 |
| 18 | Steel reiforcement for RCC work incl strengthening, cutting bending, placing in position and binding all complete upto plinth level. |
| 19 | Centring and shuttering including stregthing |
| 20 | Providing wood work in frames of doors, windows kiln seasoned and chemically treated hollock wood. |
| 21 | Steel work in build up tublar trusses etc incl cutting, hoisting, fixing in position and applying priming coat of approved steel primer incl weilding and bolted with special shape washer, hot finish weilded type tubes. |
| 22 | Providing and fixing procoated galavanized iron profile sheets total coated thickness with zinc coating 120 gms/ sqm. Complete upto any pitch in horizontal vertical excl the cost of purlins, rafters and trusses. |
| 23 | Providing and fixing procoated galavanized steel sheet roofing accessories 0.50 mm. Total coat thickness, zinc coating 120 gm/ sqm, ridges plain (500-600 mm). |
| 24 | Providing and fixing panelled and glazed shutter for door, windows and clestory windows, fixing with butt higes or reqd size with necessary screws, excl panelling which will paid for seperately, 30 mm thick shutters. |
| 25 | Providing and fixing flyproof stainless steel grade 304 wire guage with 0.5 mm dia. Wire and 1.4 mm wide aperpure with matching wood deading. |
| 26 | Providing and fixing EWC with lid, Flushing cistern, PVC connection pipe & angle cock |
| 27 | Provinding and fixing GI Pipes complete with GI fitting and clamp, 15 mm dia nominal bore. |
| 28 | Providing and fixing GI pipes complete with GI fitting incl trenching and refill etc, 25 mm dia nominal bore. |
| 29 | Providing and fixing GI Union in GI pipe incl cutting and threading the pipe and making long screws etc, 25 mm nominal bore. |
| 30 | Installation, testing and commissioning of ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 single core cable, including providing and fixing laminated sheet cover on the fan box and carriage of ceiling fan from store to site etc reqd |
| 31 | Supplying and fixing 3 pin 5/6 A socket outlet on the existing switch box/ cover including connection etc as reqd |
| 32 | Supplying and fixing 5/6 A switich on the existing switch box/ cover including connection as reqd |
| 33 | S/F on 3 pin, 5 Amp ceiling rose on the existing junction box incl connection etc as reqd |
| 34 | S/F brass batten/angle holder incl connection etc as reqd |
| 35 | S/F SP MCB 5 to 32 Amp rating, 240/415 volts, 10 KA, \"C\" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DP complete with connection, testing and commissioning etc as reqd |
| 36 | S/F 63 Amps DP 240V, isolator in the existing MCB DB complete with connection, testing and commissioning etc as reqd |
| 37 | S/F 2+8 way single door MCB distribution boards 240v on surface/recess complete with tinned copper busbar neutral busbar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnection, phosphatized and powder painted incl earthing but without MCB/RCCB/isolator. |
| 38 | Wiring for circuit/submain wiring alongwith earth wire of PVCinsulated copper conductor, single core in PVC caping & casing as reqd. Size of wire 2x6 sqmm + 1x6 sqmm earth wire |
| 39 | Schedule A (Part-II) |
| 40 | Earth work excavation in tranches not exceeding 1.5 mtr depth and wide and getting out in hard - dense |
| 41 | Providing and laying for PCC (1:3:6) |
| 42 | Providing and laying for PCC (1:2:4) Type B1 |
| 43 | Providing and laying brick works in CM (1:4) |
| 44 | Providing and laying RCC (1:1.5:3) buffle wall |
| 45 | Providing and laying RCC (1:1.5:3) for slab of septic tank |
| 46 | Use and waste form wks to buffle wall |
| 47 | Ditto but as in RCC Slab |
| 48 | Providing and laying mall steel 8-10 mm dia as in reinfrocement in RCC Slab and buffle wall |
| 49 | Proving and fixing MS Ring 16 mm |
| 50 | Providing and applying 15 mm thick plastering in CM 1:4 on wall and floor, finish with floating coat of neat cement slurry |
| 51 | Manhole made by PCC base and full brick wall mode by CI cover incl plastic insidesize 30 x 30 x 45 cm innner size |
