|
| 1 | Equipment for the Internet of Things (IoT) Laboratory |
| 2 | Texas MSP430-based Development board with Wi-Fi and LCD interface. The MSP430G2553 LaunchPad™ development Kit is cost-effective and easyto-use evaluation module (EVM) for the MSP430G2xx entry-level series of microcontrollers (MCUs). It contains what is needed to start developing on the ultra-low-power MSP430™ microcontroller platform, including an on-board debug probe for programming, debugging and energy measurements. The board also features a push button and three LEDs for creating a simple user interface.Features • 20-pin DIP (N) Socket • 20 pin LaunchPad standard leveraging the BoosterPack ecosystem • On-Board EZ-FET debug probe emulator featuring EnergyTrace™ technology • Supports MSP430G2xx2, MSP430G2xx3, and MSP430F20xx devices in PDIP14 or PDIP20 packages • 1 user buttons and 3 LEDs for user interaction |
| 3 | On-Board EZ-FET debug probe emulator featuring EnergyTrace™ technology • Supports MSP430G2xx2, MSP430G2xx3, and MSP430F20xx devices in PDIP14 or PDIP20 packages • 1 user buttons and 3 LEDs for user interaction 4 2. ESP32-based mobile Embedded and IoT interfaces Testing platform (1) The Board should have Onboard +12 V/1A 5V, and 3.3V regulated DC Supply (2) Provision for piggyback mounting of ATMEL/PIC/ARM/TI/ NODEMCU CPUs (3) 8-LEDs, 8-DIP I/Ps, 4x1 & 4x4 KBD (4) Relay, Actuator, 12V DC STEPPER 1.8-degree, DC 150 rpm, and 5V Servo Interface10kg-cm (5) Sine/Triangular/square waveform generation using DDS/ SOIC Function generator (6) Various analog and digital sensors, LoRa Wi-Fi (7) Arrangements for Digital/Analog IC Sockets (8) 16x2 LCD/OEM Display (9) Computer Desktop/Laptop interfacing and data Acquisitions (10) Arrangement of DIP switches, connectors, sockets, and indicating LEDs |
| 4 | Mobile Analog and Digital circuits Testing platform (Sr.No.139)(baseboard)1. The Board should have Onboard +/- 12 V/1A and +52. V/2A regulated DC Supply3. 8 Analog input sections with Burst sampling, 2.44Us, 104. Bit ADC5. 16 Channel Digital i/o ports6. 2 Channel 2.5us, 10-Bit DAC & 8-bit DAC7. Sine/Triangular/square waveform generation using8. DDS/SOIC Function generator9. Necessary arrangements for external connection of10. resistors, BJTs, and FETs11. Arrangements for Digital/Analog IC Sockets12. 16x2 LCD/OEM Display13. Computer Desktop/Laptop interfacing and data14. Acquisition s15. Interfacing of external Arbitrary function generator16. Arrangement of DIP switches, connectors, sockets, and17. indicating LEDs 18.DAS with wire & Wi-Fi |
| 5 | Linear Integrated Circuits Piggyback board • With various components to conduct multiple experiments on Linear Integrated Circuits • organized into banks such as IC banks, Diode banks, Resistor banks, and capacitor banks. • Contains male and female wires and connectors , eliminating the need for soldering • can function both as a standalone board and as a daughter board to the base board of the Analog Mobile IoT Lab setup |
| 6 | Electronics Devices & Circuits Piggyback board • To conduct multiple experiments on Electronic Devices, organized into banks such as Transistor banks, Diode banks, Resistor banks, and capacitor banks. • Contains male and female wires, eliminating the need for soldering and minimizing the risk of loose connections commonly encountered with Zero PCBs. • it can function both as a standalone board and as a daughter board to the base board of the Analog Mobile IoT Lab setup, enabling the utilization of features from the base board. |
| 7 | ARMLPC2148/PIC18F4550/dsPIC33EP512MC506Piggybac k board |
| 8 | TMS DSP 320x28335/28069 Piggyback board with JTAG programmer (Sr.No.143) Please Enable Macros to View BoQ information |
