Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site. |
| 2 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 3 | Taking down carefully copper/aluminium sub main wiring of any size fromsurface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 4 | M & L for point wiring using approved colour coding as per IS with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-(a) One light point controlled by one way switch 5 Amps |
| 5 | (b) One ceiling fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 6 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 7 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 8 | Description all as per item No 4 here-in-before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 9 | S & F modular switch piano flushtype, single pole, one way and 5/6 Amp single module complete all as specified and directed. |
| 10 | S & F modular switch piano flush type, single pole, one way and 15/16 Amp single module complete all as specified and directed. |
| 11 | S & F modular socket outlet multipurpose with provision of 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed at site. |
| 12 | S & F modular socket outlet multipurpose with provision of 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed at site. |
| 13 | S & F ceiling rose, surface bakelite with 3 terminals, ISImarked for batten fitting complete all as specified. |
| 14 | S & Fmodular ceiling fan regulator suitable electronic rotary step type 100 Watt 1 module ISI marked. |
| 15 | S & Fmodular white cover plate with frame 3 module |
| 16 | S & Fmodular white cover plate with frame 12 module |
| 17 | S & Fmodular metal flush box for 3 module |
| 18 | S & Fmodular metal flush box for 12 module |
| 19 | M & L for sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 20 | Supply and fixMCCBDistribution boarddouble door made out of CRCA mild steel sheet surfce with insulated material like polyester or with epoxy powder coating and IP 43& IK 09protection surface/concealed mounting vertical TPN 4 way, 440 volts with bus bar rating 200 Amps (vertical operation) and suitble size of cable gland -02 Nos, dust and vermin proofsuitable for incorporation of MCCB 4 pole 125 amps 16 kA and MCB\"s and making all necessary connections complete all as specified and directed |
| 21 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 22 | S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 23 | Supply and fix 4 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified and as directed. |
| 24 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 25 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 26 | Re-fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories complete all as specified and as directed. |
| 27 | Re-fixing of exhaust fans complete all as specified and as directed. |
| 28 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driverconnector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. |
| 29 | S & F building security lightfitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line/buildings |
| 30 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note: GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 31 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm x 4 Core passing through DWC HDPE / in trench including necessary connection with lugs and cable gland etc complete all as specified and directed. |
| 32 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm x 3.5 Core passing through DWC HDPE / in trench including necessary connection with lugs and cable gland etc complete all as specified and directed. |
| 33 | Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified and directed. |
| 34 | Excavation in trenches n.exc 1.5 mtr wide and 1.5 mtr in depth in hard/dense soil for taking up/ laying of cable and getting out complete all as specified and directed. |
| 35 | Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed. |
| 36 | Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces complete all as specified and directed. |
| 37 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. |
| 38 | Supply and laying for brick of common burnt clay, sub class \"B\" old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. |
| 39 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 40 | M & L brickwork with subclass \"B\" bricks, straight or curved on plan to any radius inhalf brick thick walls built in CM 1:4 complete all as specified and directed. |
| 41 | M & Lbrick work with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as spd. |
| 42 | Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 43 | M&L for rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge. |
| 44 | M & L rendering 15mm thick on brick wall or concrete s.urface in cement mortar 1:4 finished even and smooth without using extra cement including WPC as per manufacturer instruction complete all as specified and directed. (WPC will be measured seperately) |
| 45 | Supply only liquid water proofing compound ISI marked. |
| 46 | S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 47 | Dismantling of asbestos cement (corrugated, semicorrugated etc,) sheets in roof coverings. |
| 48 | S & F of Pre-painted galvalume aluminum zinc coating (AZ-150) GIbased corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 49 | S & F pre-painted galvalume aluminum zinc coating (AZ 150)GI based plain steelsheet 0.5mm thick of any coloure in ridge having tensile strength of 550 Mpafixed with self tapping screws as spd and directed by eng-in-charge etc. |
| 50 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle iron cleats or other connecting plates all as specified and directed. Fe410-W (gde-E-250) quality- A |
| 51 | M&L two coat of syntetic enamel paint overnew/oldsteel surface of any description over 10cm in width or grithnot otherwise describedover one coat red oxide primerincluding preparation of surfaces complete. |
| 52 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation ofold/new plastered wall surfaces. |
| 53 | M&L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 54 | M & L preparation of new plastered or unplastered surfaces and applying two coat of cement base paint on walls complete all as specified and directed. |
| 55 | S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws,etc complete all as specified.Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 56 | S&F in repair Mortice lock, vertical type, size 100 mm 2 levers aluminium type complete. |
| 57 | S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed at site. |
| 58 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane(to be fixed upto four storey of bldgs) |
| 59 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane(to be fixed upto four storey of bldgs) |
| 60 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed |
| 61 | S&F 150mm long aluminium anodised handle cast type and fixed D Type |
| 62 | M & L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate as in plinth protection and similar work finishing surfaces even and smooth without using extra cement. |
| 63 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 64 | M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed. |
| 65 | S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified and directed. |
| 66 | Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame) complete all as specified and directed. |
| 67 | Taking down chowket or frame with shutter (without taking off shutters from the frames) areaexceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and directed. |
| 68 | S & F Solid PVC Door frame size 50mmx 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube and fixing in opening as per spc & drawing complete all as specified and directed. |
| 69 | S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifiaction & drawing complete all as specified and directed. |
| 70 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 71 | M & L coloured digital Glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7-8 mmset and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 72 | M & L coloured Non Skid ceramic coloured tiles (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer with CM 1:4 ccomplete all as specified and directed. |
| 73 | M & L for vitrified ceramic tiles double charge light shed of 7.5 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 74 | M&L 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of floor complete. |
| 75 | S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.complete all as specified and directed. |
| 76 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 77 | S&Fvitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopperincluding brackets or fixed to walls with anchor fastnersall as specified and directed complete all as specified and directed. |
| 78 | S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms (complete all as specified and directed. |
| 79 | Supply & fix in repair brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed complete all as specified and directed. |
| 80 | S & F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 81 | S& F PVC ( SWR ) nahani ntrap / floor trap 75 mm dia complete all as specified and directed. |
| 82 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 83 | S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 84 | S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. |
| 85 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 86 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 87 | S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed. |
| 89 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 90 | S&F PVC (SWR) vent cowl for 110 mm bore pipe. |
| 91 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified |
| 92 | S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions |
| 93 | S&F brass chromium plated Shelf glass/Corner self assembly with CP screws etc complete all as specified and directed. |
| 94 | S&F CP towel rail/ring acomplete all as specified and directed. |
| 95 | S&F CP Wall mixer (three in one) 15mm bore for bathroom complete all as specified and directed. |
| 96 | S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed. |
| 97 | S&F aluminium handles, cast type, anodised of size 150mm. |
| 98 | S& F 100mm butt hinges, extruded aluminium with galvanised MS hinge pin anodised type C - 21 |
| 99 | S&F in repair 24-25mm bore cut to length as required stainless steel draphery rods as required of colour as selected & directed complete all as specified and directed. |
| 100 | S&F in repair 24-25mm bore stainless steel decorative brackets as required of colour as selected & directed complete all as specified and directed. |
| 101 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltrhoisted and fixed in position all as specified and directed complete all as specified and directed. |
| 102 | S&F as in repair 150mm long aluminium anodised barrel tower bolt complete. |
| 103 | M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed |
| 104 | S&F 15 mm dia stop valves/angle valves/ cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. complete all as specified and directed. Make Jaguar (Cat Part No-OPP 15053PM or equivalent) |
| 105 | S&FTowel Rail 600 mm long Stainless steel all as spfd and directed by Engr-in-Charge.Make-Jaguar Cat part No.AKP-35711PS or equivalent. |
| 106 | S&FTowel Ring round Stainless steel All as spfd and directed complete all as specified and directed. Make Jaguar (Cat Part No AQN-7721 or equivalent) |
| 107 | S&F brass chromium plated Two way bib cock with wall flange complete all as specified and directed. Make Jaguar (Cat Part No-ORP 10041PM or equivalent) |
| 108 | S&Fcounter top wash basin whitesize 600x400x185 mm including Bottle Traps, chain & plug and porcelain stopperbrackets or fixed sall as specified and directed by Engr-in-charge. Make- Jaguar Cat part no.SLS-WHT-6601 or eqvivalent. |
| 109 | Supply & fix chromium plated exposed part kit of single lever basin mixer wall mounted consisting of operating lever,cartidge sleeve,wall flange,Nipple&spout(compatible withALD-233N or ALD-235N) for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed Make Jaguar (Cat Part No-OPP 15233NKPM or equivalent) |
| 110 | S&FCP health faucet 15 mm with 8mm dia and 1.0 m long flexible tube and wall hook with NRV( back flow preventer)complete all as specified and directed. Make Jaguar (Cat Part No ALD 577 or equivalent) |
| 111 | S & F rimless bowl with cistern for coupled WC with UF soft close seat cover,hinge,dual flush cistern fitting with back filling , fixing accessories size 385x680x785mm,s trap-220mm (with conversion bend- ZPS -WHT-VB01) all as specified and directed by Engr-in-charge.Make-Jaguar (cat part no.OPS-WHT-15753S220UFPMZ or equivalent.) |
| 112 | S&F vitreous china full stall type urinal size 385x325x635mm with all fixing accessories complete all as spfd and directed. Make Jaguar (Cat Part No URS-WHT13253N or equivalent) |
| 113 | S&F rectangular shaped urinal partion with frostrd glass 10mm thick chrome finish size 900x450mm.complete all as specified and directed. Make Jaguar (Cat Part NoJSE-CHR-810US450X or equivalent) |
| 114 | S&F CP toilet paper holder with flap complete all as specified and directed. Make Jaguar (Cat Part No CPA-1153 or equivalent) |
| 115 | S& F soap dish holder incl all fitting complete all as spfd and directed.Make Jaguar (Cat Part No CPA-1135 or equivalent) |
| 116 | S& F soap dispenser with glass bottleincl all fitting complete all as spfd and directed.Make Jaguar (Cat Part No CPA-1131 or equivalent) |
| 117 | S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 118 | S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etccomplete as in repair all as specified and directed. |
| 119 | S & F as in repair of whiteseat cover for pedestal pattern water closet including fixing bolts ccomplete all as specified and directed. |
| 120 | S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe and coupling complete all as specified and directed. |
| 121 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 122 | M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundations/path hardstanding, filling and mass concrete complete all as specified and as directed |
| 123 | M&L ForChequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry incl 15mm thick screed bed in CM1:4in floors with grey pigments cement and pigments. complete all as specified and directed. |
| 124 | M & L for RCC Type B-1, 1:2:4 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span incl form work complete. complete all as specified and directed. |
| 125 | M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia complete all as specified and directed. |
| 126 | M & L for point wiring using approved colour coding as per IS with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered suitable modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by engineer in charge for the following :-\"(a) One bell pointcontrolled by one switch |
| 127 | S & F modular switch piano bell pushtype, single pole, one way and 5/6 Amp single module complete. |
| 128 | S & F ding dongbuzzer call bell complete all as specified and directed . |
| 129 | S & F sheet metal enclosure MCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door with IP-43 & IK 09 protection, suitable for 01 No incoming MCB TPN and 12 Nos out going MCB SP,flush to wall including all cutting etc. in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.Note: MCB\"s are measured and paid in separate items and same make. |
| 130 | S & F for MCB TPN rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve, with ISI mark complete all as specified and as directed. |
| 131 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 132 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mcomplete all as specified anddirected. |
| 133 | S&F in replacement of LED panel light fitting 36 watt LED (2x2 ft), LED panel fitting, including LED in white230 volt energy saving environmental friendly, long life, corrosion resistant, impact proof, surface mounting IP-65 luminaire with PC housing in opal finish suitable for wet location with brighness LEDs with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. |
| 134 | S & F in replacement round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete with all accessories internally prewired complete all as specified and directed. |
| 135 | S & F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC connecting up with three core flexible copper conductor cable of suitable size complete with all accessories internally pre wired and necessary mounting arrangements complete all as specified and directed. |
| 136 | Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in Hard /dense soil complete all as specified and directed. |
| 137 | M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete. complete all as specified and directed |
| 138 | M&L For Reinforced cement concrete Nominal Mix 1:1.5:3 Type A 1(using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete(reinforcement to be measured separately) complete all as specified and as directed |
| 139 | All are as per item no 03 but in column complete all as specified and directed. |
| 140 | M&L For RCC 1:2:4 type B-1, ( using 20 mm graded stone aggregate ) as inbeams, cantilevers, bed block, bressummers, lintels over 1.5m span , including necessary form work etc complete all as specified anddirected |
| 141 | M & L for Reinforced Cement Concrete Nominal Mix 1:1.5:3 Type A 1(using 20 mm graded stone aggregate) in Chajjas and the like complete all as specified anddirected |
| 142 | M & L Use and waste of Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation and plinth beams and similar work for rough finished flat surfaces of concretecomplete all as specified & directed. |
| 143 | All as per item no 07 above but sides of square column fair finished surface complete all as specified & directed. |
| 144 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 145 | Use & waste for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surface complete all as specified and as directed |
| 146 | Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed . |
| 147 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed . |
| 148 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in CM 1:6 complete all as specified and directed. |
| 149 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 150 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 151 | M & L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed. |
| 152 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed . |
| 153 | M&L for rendering 5 mm thick on concrete surfaces of wall / vertical surfaces in cement mortar 1:3, and finish the surface even and smooth without using extra cement complete all as specified and directed . |
| 154 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 155 | M&L preparing newly plastered surfaces of wall and applying complete wall with1.0 mm Wallputty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed |
| 156 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete as specified and directed. |
| 157 | S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etcFe 410 W (Gde E - 250 quality) as specified complete as specified and directed. |
| 158 | M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed |
| 159 | M&L for 75mm thick P.C.C 1:4:8 type D-2 in sub base of floorcomplete all as specified and directed |
| 160 | M & L for virified ceramic double charge tiles 7.5mm thick (square/ rectangular) polished, size of each tiles 1200 x 1800mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed . |
| 161 | M & L for virified ceramic double charge tiles 7.5 mm thick (square/ rectangular) polished, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed . |
| 162 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed . |
| 163 | S & F in CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete all as specified and directed |
| 164 | S & F in CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete all as specified and directed |
| 165 | S & F of Male Brass Threaded Adaptor (MTA/ MBTA)or Feale Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed |
| 166 | S&F Escco STE 107053 15 mm dia stop valves/angle valves/ cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. |
| 167 | S&F brass chromium plated Shelf glass/Corner self assembly with CP screws etc complete all as specified and directed. |
| 168 | S&F wall mixer Escco STE-107273 with all assembly and all as specified and directed complete all as specified and directed. |
| 169 | S&F Escco AEC 1111N Towel Rail 600 mm long Stainless steel All as spfd and directed by Engr-in-Charge |
| 170 | S&F Escco SQT-512ANKNTwo way bib cock with wall flange All as spfdand directed |
| 171 | S&FESCCO ECSWHT-933 Table top wash basin whitesize 570x460x200 mm including Bottle Traps, chain & plug and porcelain stopperbrackets or fixed sall as specified and directed |
| 172 | Supply & fix Escco STE-107021 Single lever brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed |
| 173 | S&FALE-CHR-593 CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etccomplete as in repair all as specified. |
| 174 | S & F ESCCO ECS-WHT-851S220NPP water closet panwith slim Soft Closet seat cover all as specified and directed |
| 175 | S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed |
| 176 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 177 | M & L for Gully traps salt glazed stoneware (SGSW)square or round mouthed type \"P\" of size 180x100mmfor drain pipes complete all as specified and directed. |
| 178 | S&F110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 179 | S & F110 mm diabore PVC (SWR) junction single \"T\" equal or unequalcomplete all as specified and directed . |
| 180 | S & F chrominium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including bracket complete all as specified and directed. |
| 181 | S & F toilet paper holder , vitreous china box type fixed to wall with chromium plated brass screws complete all as specified and directed |
| 182 | S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified and directed |
| 183 | S & FAluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifiedand directed |
| 184 | S&F 5mm thick tinted glass in aluminium doors & windows with rubber packingincluding hacking out old broken glass complete all as specified and directed . |
| 185 | S&F 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. complete all as specified and directed |
| 186 | S&F 5mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed . |
| 187 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed complete all as specified and directed. |
| 188 | M & L Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingcompleteall as specified and directed |
| 189 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 190 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 191 | S & F of 12.5mm thick Gypsum board designer flase ceiling with GI frame work as under:-(a) GI Sheet Channel 30X25X20mm of 24 gauge placed fixed with 4mm dia GI wire @ 450mm centre to center along with perimeter of wall.(b) GI Sheet Channel made to shape 50X40mm of 24 gauge placed @ 600mm center to center from perimeter of wall except long wall (in one span)(c) GI Sheet Intermediate runner of size 45X10X10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame on side wall (in other span)(d) GI Sheet 25mm wide x 20mm gauge syspender fixed with 4mm dia GI Wire @ 1200mm centre to centre including plugging in/fixing in trusses.(e) Fixing of 12.5mm thick Gypsum board including 1mm thick putty and two coats of acrylic emulsion paint and comices all around all as specified and directed. |
| 192 | S & F in replacement LED lights fitting 1x 20W 220V, LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements,complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
