|
| 1 | Schedule \"A\" |
| 2 | Material & Labour for Repair to potholes any depth, not exceeding 1.0 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc., complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for Applying evenly a priming/tack coat with bituminous primer (paving bitumen) at 10 Kg per 10 Sqm etc., complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour for Premix bituminous, macadam with 4 % binder content by weight of total mix rolled and compacted to required camber and gradient with 08 to 12 tonne power roller etc., complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for Bituminous premix semi dense asphaltic (SDAC) concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with 08 to 12 tonne power roller etc., complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for painting lines, dashes, arrows, letters, marking of 2mm thick on new surface or previously treated road surface with hot applied retro reflective thermoplastic road marking paint(white/golden yellow) confirming to MORTH (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree Centigrade including cleaning and drying the existing road surfaces to ensure dust, oil grease and moisture free surfaces before applying paint, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply and fixing in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc., complete all as specified and directed by Engineer-in-Charge.Make- SENAR, Dhruv, Road Star or Equivalent. |
| 9 | Supply & Fixing in repair Reflecting road studs /cat eye (two way) size 100mm x 100mm x 25mm through polycarbonate lens shield body component light weight ribbed structure on bedded in road surface using cut back bitumen emulsion, complete all as specified and directed by Engineer-in-Charge.Make: 3M/Dark Eye or Equivalent. |
| 10 | Supply and fixing in repair metal oval delineator made out of powder coated aluminium oval body fitted with 2 Nos 65mm dia. highly reflective reflectors made out of retro reflective pasted on 50/65mm wide aluminium oval pipe of 600mm height duly powder coated and thermo plastic, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for preparation of old painted concrete surfaces of any description over 10 cm girth or width not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
