|
| 1 | Excavation in trenches in soft/ loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth for foundation, laying of pipes etc. and getting out complete all as specified and directed. |
| 2 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each soft and loose soil, complete all as specified and directed. |
| 3 | Removing excavated surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5mtrs above the starting points complete all as specified and directed. |
| 4 | Supplying, laying and jointing 100mm bore medium grade galvanized iron pipe with screwed socket joints andall fittings such as bends, Tees, unions, elbows, reducers and sockets etc. laid in trenches complete all as specified and directed. |
| 5 | Supplying, laying and jointing 80mm bore medium grade galvanized iron pipe with screwed socket joints andall fittings such as bends, Tees, unions, elbows, reducers and sockets etc. laid in trenches complete all as specified and directed. |
| 6 | Supplying, laying and jointing 50mm bore medium grade galvanized iron pipe with screwed socket joints andall fittings such as bends, Tees, unions, elbows, reducers and sockets etc. laid in trenches complete all as specified and directed. |
| 7 | Supplying, laying and jointing 25mm bore medium grade galvanized iron pipe with screwed socket joints andall fittings such as bends, Tees, unions, elbows, reducers and sockets etc. laid in trenches complete all as specified and directed |
| 8 | Supplying, laying and jointing 20mm bore medium grade galvanized iron pipe with screwed socket joints andall fittings such as bends, Tees, unions, elbows, reducers and sockets etc. laid in trenches complete all as specified and directed |
| 9 | Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with brass spindle & checknut suitable for 150mm bore pipe with flanged ends, any pattern including nuts, bolts, 3mm thick rubber gasket, wheel etc. complete all as specified and directed. |
| 10 | Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with brass spindle & checknut suitable for 100mm bore pipe with flanged ends, any pattern including nuts, bolts, 3mm thick rubber gasket, wheel etc. complete all as specified and directed. |
| 11 | Supply & fixing cast iron sluice valve PN 1.6 conforming to IS 14846-2000 with brass spindle & checknut suitable for 80mm bore pipe with flanged ends, any pattern including nuts, bolts, 3mm thick rubber gasket, wheel etc. complete all as specified and directed. |
| 12 | M&L for construction of brick masonry valve pit chamber of inner dimension 1200mm x 1200mm x 1200mm suitable for valves upto 200mm size including 150mm thick PCC (1:4:8) type D-2 for foundation, brick work in cement mortar (1:4), 15mm thick internal rendering in cement mortar (1:4) mixed with water proofing compound, 50mm thick coping in PCC (1:2:4) type B-1, including necessary excavation and earth work including provision of MS sheet cover of thickness 3mm in two halves fitted with heavy duty hinges on 50mm x 50mm x 6.0mm angle iron frame with locking arrangement and handle of suitable size, including painting MS surfaces with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 13 | M&L for construction of brick masonry valve pit chamber of inner dimension 900mm x 900mm x 1200mm suitable for valves upto 200mm size including 150mm thick PCC (1:4:8) type D-2 for foundation, brick work in cement mortar (1:4), 15mm thick internal rendering in cement mortar (1:4) mixed with water proofing compound, 50mm thick coping in PCC (1:2:4) type B-1, including necessary excavation and earth work including provision of MS sheet cover of thickness 3mm in two halves fitted with heavy duty hinges on 50mm x 50mm x 6.0mm angle iron frame with locking arrangement and handle of suitable size, including painting MS surfaces with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 14 | M&L for construction of brick masonry valve pit chamber of inner dimension 900mm x 900mm x 900mm suitable for valves upto 200mm size including 150mm thick PCC (1:4:8) type D-2 for foundation, brick work in cement mortar (1:4), 15mm thick internal rendering in cement mortar (1:4) mixed with water proofing compound, 50mm thick coping in PCC (1:2:4) type B-1, including necessary excavation and earth work including provision of MS sheet cover of thickness 3mm in two halves fitted with heavy duty hinges on 50mm x 50mm x 6.0mm angle iron frame with locking arrangement and handle of suitable size, including painting MS surfaces with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 15 | M&L for cutting existing CI pipe line of size 150 mm dia for making branch connetion including supply and fixing CI tee 150mm x 150mm x 100 mm flanged ends - 01 No, CI tail piece sockted & flanged 150 mm dia - 02 Nos including making run lead joints/ flanged joints with nuts/bolts/washers/rubber gaskets and including earth work in loose/soft soil complete all as specified and directed. |
| 16 | M&L horizontal boring of holes under road, pavement, hard standing by trenchless technology using any type of mechanical means without disturbing/damaging top hard surfaces for passing 100 mm dia GI pipe complete all as specified and as directed |
| 17 | S&F 6 mtr long 100 mm dia GI pipe medium grade with flanged endscomplete all as specified and as directed. |
| 18 | Supply and fixing Gun metal/globe/ gate valve with iron wheel handle screwed at both ends ISI marked suitable for GI pipe of size 50mm bore complete all as specified and directed. |
| 19 | Supply and fixing Gun metal/globe/ gate valve with iron wheel handle screwed at both ends ISI marked suitable for GI pipe of size 25mm bore complete all as specified and directed. |
| 20 | Supply and fixing Gun metal/globe/ gate valve with iron wheel handle screwed at both ends ISI marked suitable for GI pipe of size 20mm bore complete all as specified and directed. |
