|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, under groung cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 3 | M&L for plain cement concrete (1:4:8), type D2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete for sub base of flooring / hard standing path, complete all as specified and directed. |
| 4 | M&L for plain cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete for fencing etc., complete all as specified and as directed. |
| 5 | M&L for plain cement concrete (1:2:4), type B-1(using 20 mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork, all as specified and as directed. |
| 6 | M&L for 100mm thick plain cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate)as infloor finshes, paving, sub base, floor etc., complete all as specified and directed. |
| 7 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and as directed. |
| 8 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including sand cushioning to under paver blocks and filling the joints with sand,complete all as specified and directed. |
| 9 | Demolition ofreinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not specifically provided and removing of debris outside MD land, complete all as specified and directed. |
| 10 | M&L for reinforced cement concrete (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 11 | M&L for reinforced cement concrete (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 12 | M&L for providing precast cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes, drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces with plain fair faces, including chamfers, weatherings, throat- ing etc. and set in cement mortar (1:4), complete with joints to match, all as specified and directed. |
| 13 | M&L for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed, complete all as specified and directed |
| 14 | Returning filling in loose/ rocky/ hard/ dense soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed. |
| 15 | Removing excavated material (soils) eexc. 250 m but n exc. 500 m and depositing where directed and as specified. |
| 16 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete on square rectangular on plain or polygonal, complete all as specified and directed. |
| 17 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete on flat surface, complete all as specified and directed. |
| 18 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with mild steelwire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 19 | M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed. |
| 20 | Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately), complete all as specified and directed. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 22 | M&L for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410- W(Gde- E-250) quality- B), complete all as specified and directed. |
| 23 | S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 24 | S&F of rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed. |
| 25 | Dismantling of plain or corrugated Asbestos cement, any gauge and thickness including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 26 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 27 | S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 28 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 29 | M&L for preparation of new brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of priming paints plaster coat, complete all as specified and directed. |
| 30 | M&L preparing of old plastered or unplastered surface of walls and applying one coat of weather coat paint of camouflage colours on old plastered and other surfaces with safety belts/ formwork/ scaffolding etc., complete all as specified and directed. |
| 31 | M&L for rendering 10mm thick on block concrete masonry walls or brick / concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement, complete all as specified and directed. |
| 32 | Taking down cement or cement lime plaster, any description on brickor stone masonrysurfaces of walls etc includingrakingout joints, hackingfor key, scrubbingdown with wateretc., complete all as specified and directed. |
| 33 | M&L for rendering 10mm thick on block concrete masonry walls or brick / concrete surfaces in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and directed. |
| 34 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 35 | S&F in repairs of galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed. |
| 36 | Dismantling fencing wire mesh, any type, complete all as specified and directed. |
| 37 | Supply only chain link MS galvanisd fencing, size of wire mess 4mm dia and nominal pitch of wire 100 x 100mm fixed, complete all as specified and directed. |
| 38 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed. |
| 39 | M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for fencing, columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165), complete all as specified and directed. |
| 40 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long and diameter of neck 11 to 15 mm, all as specified and directed. |
| 41 | M&L for forming 12mm thick expansion joints filled withpre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘A’for 100mm thick concrete slab, complete all as specified and directed. |
| 42 | M & L for cleaning of area drainage by removing cover slabs of any description position & thickness, removing material i.e. soil, vegetation, shrubs from cover slab & cleaning of deposited clay, slit, soil, debris, leaves and similar material from adjecent sides of road incl median (divider portion), saucer drain, weep holes and make themain drain functional and placing the cover slab on the same, making good and disposing of removable material in Sharadha bridge location, complete all as specified and directed. |
| 43 | M&L for removal of unwanted vegetation on floors and wall any surface and disposing the material where directed by Eng-in-Charge and all as specified |
| 44 | M&L for complete removal of existing treatment of paint on wall and applying two coats of weather coat paint of camouflage colours on old plastered and other surfaces with safety belts/ formwork/ scaffolding etc., complete all as specified and directed. |
| 45 | Total Amount in Figures |
| 46 | Quoted Amount in Words |
