|
| 1 | Item No. 1;- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 200 mm Dia. HDPE PipePE-100, 10 Kg/Sq. cm: |
| 2 | Item No 2 :- HDPE Specials for Work 200 mm Dia. For DI Pipe |
| 3 | Item No 3 :- Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Couplers 200 |
| 4 | Equal Tee 200 |
| 5 | Elbow 90 Deg. 200 |
| 6 | Elbow 45 Deg. 200 |
| 7 | Reducer 200X140 |
| 8 | End Cap 200 |
| 9 | Item No. 4. Supply of C. l. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. l. Spun Pipes ( as per - lS - 1536 120O1) and D. L Pipes ( as per lS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.l. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in lS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed.200 mm Dia. |
| 10 | Item No. 5. Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps including all taxes transportation etc complete.200 mm Dia. Sluice Valve PN 1.6 (Without Bypass) |
| 11 | Item No.6 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and preading as directed, normal dewatering,preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) Add 10% Municipal Area 200 mm Dia. Pipeline lift 0.00 to 1.50 m |
| 12 | Item No.7 :- Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-3/259) Add 10% Municipal Area |
| 13 | Item No.8 :- Lowering, Laying and Jointing H.D.P.E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II Add 2% Municipal Area 200 mm Dia. HDPE Pipe |
| 14 | Item No.9 :-Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for PCC work below foundation and footing including normal dewatering,plywood form work, compaction, finishing and curing, etc, complete. Add 2% Municipal Area |
| 15 | Item No.10 :- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Add 2% Along National Highway |
| 16 | Item No.11 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.Add 2% Along National Highway Net Qty. of Refilling |
| 17 | Item No. 12 Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge.As above of 90 x 90 cm internal size and depth upto 1.2 M with 53 cm dia CI manhole frame and cover of 90 kg. fixed in RCC slab. 0.9 x 0.9 x 1.5 m |
| 18 | Item No.13 :-Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking, etc. complete. MS barrels (pipe pieces) locally manufactured (for small quantities) for Making Bends |
| 19 | Item No 14 :- Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. Butt Joint 6 mm 6 mm Thk Butt Joint |
| 20 | Lap Joint 6 mm6 mm Thk Lap Joint |
| 21 | Item No 15 :- Gas cutting (either square cut or V cut) pipes, plates, etc.of thickness ii) Above 5 mm. Upto 10 mm |
| 22 | Item No 16 :- Giving satisfactory hydraulic testing of following C. I. D / F Reflex valves, Butterfly valves and Sluice valves 200 mm Dia. Sluice Valve PN 1.6 (Without Bypass) |
| 23 | Item No.17 :- Providing and supplying Air Valves as per IS-14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete 50 mm Dia. Air Valve Double Ball Flanged Type PN-1.6 |
| 24 | Item No.18 :- Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). 50 mm Dia. Air Valve Double Ball Flanged Type PN-1.6 Please Enable Macros to View BoQ information |
