Tender For Repair, Polishing And Rescanning Of Various Wooden Furniture At Mil Stn Kanchrapara Under Ge Barrackpore, Barrackpore-West Bengal

TDR : 52920572

Tender Notice
BOQ

17 Days Left

Barrackpore , West Bengal

Tender Brief : Tender For Repair, Polishing And Rescanning Of Various Wooden Furniture At Mil Stn Kanchrapara Under Ge Barrackpore

Document Fees
₹ 500 /-

EMD
₹ 60000.0 /-

Tender Value
₹ 30 Lakhs /-

Submission Date
02-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	REPAIRS TO BED WITH PLY TOP FOR THE FOLLOWING(DRG No.FD-246):-
2	HEAD BOARDRemoving decayed head board from its existing position and replace the same with new head board of overall size 900 x 610mm, frame made out from well seasoned 1st class hard wood (Teak/Seasam) batten 75mm x 22mm thick with soft wood(chairbatten 03 Nos board), 4mm thick one side teak face BWRgrade, type BB Ply wood (three Nos of ply) and other side commercialto be provided on both sides of the head board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
3	FOOT BOARDRemoving decayed foot board from its existing position and replace the same with new foot board of overall size 900mm long and 300mm height, frame made out from well seasoned 1st class hard wood (Teak/Seasam) batten 75mm x 22mm thick with soft wood(chairbatten 03 Nos board), 4mm thick one side teak face BWRgrade, type BB Ply wood (three Nos of ply) and other side commercialto be provided on both sides of the foot board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
4	FOOT BOARD OUTERS&F for new 4mm thick one side teak face BWR grade, type BB plywood (three Nos of ply) and other side commercial for foot board outer including finishing the surface with french polish including taking out old unserviceable foot board outer complete all as specified and as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
5	FOOT BOARD INNERS&F for new 4mm thick one side teak face BWR grade, type BB plywood (three Nos of ply) and other side commercial for foot board inner including finishing the surface with french polish including taking out old unserviceable foot board inner complete all as specified and as Shown on drawing.(Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)
6	LONG RAILRemoving of each decayed long rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) long rail of size 95mmx35mmx1980mm long rounded one edges or face made out from well seasonedwood all as shown on drawing.
7	SHORT RAILRemoving of each decayed short rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) short rail of size 95mmx35mmx900mm short rounded one edges or face made out from well seasonedwood all as shown on drawing.
8	STIFFENERRemoving of each decayed stiffner from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) stiffener of size 60mmX40mmX880mm long rounded one edges or face made out from well seasonedwood all as shown on drawing.
9	MS FLAT IRON STIFFENERRemoving old MS stiffenerfrom hard bed and replace the same with MS flat iron of size 35mm x5mmx150mm, bent at right angle at four corner all as shown on drawing.
10	TOPRemoving decayed/wornout ply wood top from its existing position and replace the same with new plywood top made out from 12mm thick plywood (seven Nos of ply), BWR grade, type BBfixed to wooden rails with screws all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply/Archid ply as approved)
11	REPAIRS TO CHAIR DINING FOR THE FOLLOWING (DRG No.FD-16(M), FD-279):-
12	FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam)all as shown on drawing.
13	REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
14	FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
15	REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
16	SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
17	REAR STIFFENERRemoving of each decayed rear stiffenerfrom its existing position and replace the same with new rear stiffenermade out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
18	STIFFENERRemoving of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
19	REPAIR TO CHAIR WRITING FOR THE FOLLOWING (DRG No. FD-280):-
20	FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam)all as shown on drawing.
21	REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
22	FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
23	REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
24	SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
25	REAR STIFFNERRemoving of each decayed rear stiffenerfrom its existing position and replace the same with new rear stiffenermade out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
26	STIFFENERRemoving of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
27	ARMRemoving of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
28	REPAIRS TO CHAIR CB OFFICE FOR THE FOLLOWING (DRG NO.DB-3954 & DB-4124):-
29	FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam)all as shown on drawing.
30	REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
31	FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
32	REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
33	SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
34	STIFFENERRemoving of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
35	ARMRemoving of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
36	REPAIRS TO CHAIR EASY FOR THE FOLLOWING (DRG NO.FD-281, FD-229):-
37	FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam)all as shown on drawing.
38	REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
39	FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
40	REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
41	SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new siderail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .
42	ARMRemoving of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
43	REPAIRS TO CHAIR WOODEN BOTTOM W/O ARM FOR THE FOLLOWING [DRG NO. FD-56(M), FD-225, FD-285] :-
44	FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam)all as shown on drawing.
45	REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
46	FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing .
47	REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing .
48	SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing .
49	STIFFNERRemoving of each decayedstiffenerfrom its existing position and replace the same with newstiffenermade out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
50	SEATRemoving of decayed/wornout plywood seat from its existingposition and replace the same with new seat made out from plywood of 6mm thick, BWR grade, type BB (five Nos of ply) trapezoidal in shape of length 445mm at front side and 405mm at rear side with 440mm in height all as shown on drawing.
51	RECANNING OF VARIOUS TYPE OF CHAIRS FOR THE FOLLOWING (DRG NO.FD-279, FD-280, FD-281, FD-229) :-Removing of old unserviceable cane plastic from various chairs such as chair dining, chair writing, chair CB office, chair office CB, chair CB w/o arm and chair easy etc re-canning the same with new cane plastic 2mmwide half round white in colour for main canning and 3.5 to 4mm wide half round white in colour for border as approved quality all as shown on drawing.
52	REPAIRS TO LOCKER FOR THE FOLLOWING(DRG NO FD-54(M) , FD-222 & FD-359) :-
53	TOPRemoving decayed wooden top of locker from its existing position and replace the same with new top made out from 18mm thick well seasoned 1st class hardwood(Teak/Seasam)plank complete all as shown on drawing.
54	BOTTOMRemoving decayed wooden from bottomside of locker from its existing position and replace the same with newbottommade out from 18mm thick well seasoned 1st class hard wood (Teak/Seasam) plank complete all as shown on drawing.
55	SIDERemoving decayed wooden each side of locker from its existing position and replace the same with new side made out from 18mm thick well seasoned 1st class hard wood (Teak/Seasam) plank complete all as shown on drawing.
56	SHUTTERRemoving decayed shutter (Single leaf) from its existing position and replace the same with new leaf made out from 18mm thick veneered particle board (exterior grade) one side teak finish with 6mm thick and 1st class hard wood (Teak/Seasam) beading all round the shutter all as shown on drawing.
57	BACKRemoving decayed back from its existing position and replace the same with new back made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade all as shown on drawing.
58	SHELFRemoving each decayed shelf from its existing position and replace the same with new shelf made out from 12mm thick well seasoned 1st class hard wood (Teak/Seasam) planks all as shown on drawing.
59	HANGING RODRemoving old broken hanging rod from its existing position and replace the same with new hanging rod made out from 20mm (external dia) aluminium anodized conduit with a pair of sockets all as shown on drawing.
60	LEGRemoving decayed wooden each leg of locker from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) of size 50mmx50mm all as shown on drawing.
61	RAILRemoving decayed wooden each rail of locker from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) of size 25mmx40mm all as shown on drawing.
62	HANDLES&F for 100mm long CP handle all as shown on drawing.
63	HINGESS&Ffor 75mm long cold rolled mild steel butt hinges (medium weight) fixed with steelscrews all as shown on drawing.
64	HASP & STAPLESupply and fixing for 75mm long hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with steel wood screws.
65	REPAIRS TOTRESTLE STORE ROOM WOODENFOR THE FOLLOWING [DRG NO FD-86(M),FD-141]:-
66	LEGRemoving of decayed each leg of trestle store room from its existing positionand replace the same with new leg made out from well seasoned ‘SAL’ wood all as shown on drawing.
67	TOP LONG RAILRemoving of decayed top long rail from its existing position and replace the same with new long rail made out from well seasoned ‘SAL’ wood all as shown on drawing.
68	CROSS STIFFENERRemoving of decayed cross stiffenerfrom its existing position and replace the same with new cross stiffenermade out from well seasoned ‘SAL’ wood all as shown on drawing.
69	INTERMEDIATE STIFFENERRemoving of decayed intermediate stiffener from its existing position and replace the same with new intermediate stiffner made out from well seasoned ‘SAL’ wood all as shown on drawing.
70	REPAIRS TO TABLE WRITING FOR THE FOLLOWING (DRG NO. FD-33, FD-249, FD-275) :-
71	LEGRemoving decayed each leg of table writing from its existing positionand replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
72	TOP RAILRemoving decayed each top rail of table writing from its existing position and replace the same with new top rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
73	BOTTOM RAILRemoving decayed each bottomrail of table writing from its existing position and replace the same with new bottom rail made out from well 1st class hard wood (Teak/Seasam) all as shown on drawing.
74	STIFFENERRemoving decayed each stiffener of table writing from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
75	SIDE BOX WITH DRAWERRemoving decayed side almirah (side box ) with drawer and replace the same with 18mm thick veneered particle board (exterior grade) made having teak face at one side and other side commercial for side, back , front and bottom side of the drawer, stiffener, bearer shall be made out from well seasoned second class hardwood, rest all as shown on drawing.
76	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging all as shown on drawing.
77	REPAIRS TO TABLE 3’X2’ W/O DRAWER FOR THE FOLLOWING [DRG NO. FD-284, FD-55, FD-42(M)]:-
78	LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
79	TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
80	TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
81	STIFFENERRemoving decayed each stiffenerfrom its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
82	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
83	REPAIRS TO TABLE 3’X2’ WITH DRAWER FOR THE FOLLOWING [DRG NO. FD-283, FD-41(M) ]:-
84	LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
85	TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
86	TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
87	STIFFENERRemoving decayed each stiffenerfrom its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
88	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
89	DRAWERRemoving decayed and replace the drawer made out from well seasoned 1st class hard wood (Teak/Seasam) for front, rear & side with track rail, guide rail & fillet and bottom shall be made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade complete all as shown on drawing.
90	REPAIRS TO TABLE DINING FOR 6 PERSONS FOR THE FOLLOWING (DRG NO. FD-30, FD-239, FD-273) :-
91	LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
92	TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
93	TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
94	STIFFENERRemoving decayed each stiffenerfrom its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
95	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
96	REPAIRS TO TEAPOY FOR THE FOLLOWING (DRG NO.FD-34, FD-232, FD-382, FD-278):-
97	LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
98	TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
99	TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
100	STIFFENERRemoving decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
101	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
102	REPAIRS TO TABLE CENTRE FOR THE FOLLOWING (DRG NO.FD-29 , FD-235, FD-274):-
103	LEGRemoving decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
104	TOP RAIL LONGRemoving decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
105	TOP RAIL SHORTRemoving decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
106	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
107	REPAIRS TO TABLE DRESSING GENTS FOR THE FOLLOWING (DRG NO.FD-230, FD-379):-
108	TOP AND BOTTOM OF BOXRemoving decayed top and bottom of box from its existing position and replace the same with new top made out from 12mm thick pre-laminated particle board (exterior grade), grade-I quality, with 6mm thick andwell seasoned 1st class hardwood (Teak/Seasam)wooden beading allround the edging. Bottom of the box shall be made out 12mm thick ply wood(seven Nos of ply), type BB, BWR Gde complete all as shown on drawing.
109	SIDE OF BOXRemoving decayed each side of the box from its existing position and replace the same with new side of the box made out from 12mm thickpre-laminated particle board (exterior grade), grade-I quality, one side decorative all as shown on drawing.
110	BACK OF BOXRemoving decayed each back of the box from its existing position and replace the same with new back of the box made out from 12mm thick plywood(seven Nos of ply), type BB,type BWR grade, complete all as shown on drawing.
111	DRAWERRemoving decayed drawer and supply and fixing drawer front & side made out from 12mm thickpre-laminated particle board (exterior grade), grade-I quality, one side decorative, bottom shall be made out from 6mm thickply wood (five Nos of ply), type BB, BWR grade and back shall be made out from 12mm thick well seasoned second class hardwood all as shown on drawing.
112	MIRRORRemoving broken mirror from its existing position and supply and fixingfor copper plated 5.5mm thick mirror mounted on new frame made out 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with well seasoned second class hard wood all as shown on drawing. (Make : Modiguard/Saint gobain as approved)
113	REPAIRS TO TABLE DRESSING LADIES FOR THE FOLLOWING (DRG NO.FD-251) :-
114	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
115	SIDERemoving decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade) with one face teak and other face commercial veneer all as shown on drawing.
116	BACKRemoving decayed back from its existing position and replace the same with new back made out from 12 mm thick veneered particle board (exterior grade) with commercial veneers on both faces all as shown on drawing.
117	DRAWERRemoving drawer and replace the side and back of drawer made out from 12mm thick well seasoned 1st class hard wood (Teak/Seasam). Bottom of the drawer shall be made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade. Front of the drawer shall be made out from 18mm thick veneered particle board (exterior grade) with commercial veneers on both faces with 1.00mm thick plastic laminated sheet (plain & wood grain) pasted over particle board with approved synthetic adhesive all as shown on drawing.
118	MIRRORRemoving broken mirror with frame and supply and fixing for mirror 5.50 mm thick 355mmx1220mm size free from any cracks/scratches and distorted image etc mounted on 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with 25mmx19mm teak wood well seasoned timber frame all as shown on drawing. (Make : Modiguard/Saint gobain as approved)
119	REPAIR TO TABLE 900MMX900MM FOR THE FOLLOWING (DRG NO.FD-88, FD-291):-
120	LEGRemoving decayed each leg of table 900mmx900mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.
121	TOP RAIL LONGRemoving each decayed top long rail from its existing position and replace the same with newraillong made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.
122	TOPRAIL SHORTRemoving each decayed top short rail from its existing position and replace the same with newrailshort made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.
123	TOPRemoving decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white laminationincluding provision of 4mm thick teak wood beading alround the edging all as shown on drawing.
124	MS STIFFENERProvision of mild steel flat iron of size 20mmx3mmx200mm long bent to shape as in strap to all joints, jointing length & top of each table fixed with suitable size wood screws all as directed.
125	REPAIR TO TABLE BED SIDE FOR THE FOLLOWING (DRG No FD-276, FD-248, FD-28, FD-210):-
126	TOPRemoving decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white laminationincluding provision of 4mm thick teak wood beading alround the edging all as shown on drawing.
127	LEGRemoving decayed wooden each leg of table bed side from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) of size 65mmx50mm all as shown on drawing.
128	BACKRemoving decayed each back of table bed side from its existing position and replace the same with new back made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade of required size all as shown on drawing.
129	SIDERemoving decayed each side of table bed side from its existing positon and replace the same with 18mm thick one side teak face particle board (Exterior Grade), grade-I quality of required size all as shown on drg.
130	REPAIRS TO TABLE PEG FOR THE FOLLOWING (DRG NO.FD-25, FD-236, FD-277, FD-384):-
131	LEGRemoving decayed each leg of table 900mmx900mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.
132	TOP LONG RAILRemoving decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
133	TOP SHORT RAILRemoving decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
134	TOPRemoving decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality,prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legsall as shown on drawing.
135	REPAIR/REPLACEMENT OF FOAM CUSHION OF SOFA SET 05 SEATER (DRG NO.FD-281/FD-282):-
136	Removal of old unserviceable foam, cushion sofa set(comprising of 10 Nossingle cushion including seat and back) and supply and fixing new foam cushion 100mm thick 40/32 density covered with approved quality tapestry cloth (cost of tapestry cloth shall; not be less than Rs.450.00 per metre). (Make : Kurlon/Sleepwell as approved)
137	Removal of old unserviceable tapestry cloth from each foam cushion sofa set (comprising of 10 Nos single cushion)and replace with new tapestry cloth of approveds quality (cost of tapestry cloth shall not be less than Rs. 450.00 per metre).
138	TAKING DOWN OLD UNSERVICEABLE COMPONENTS/PARTS FROM SOFA SET (5 SEATER/ 4 SEATER/ 3 SEATER & SINGLE SEATER) AND REASSEMBLE/ REFIXING WITH THE FOLLOWING NEW PARTS MADE OUT OF WELL SEASONED TEAK WOOD FREE FROM CRACK, KNOTS, HOLE ETC ALL AS SPECIFIED AND SHOWN ON DRG NO FD-281:-
139	S&F for teak wood arms of sofa sets of required size including taking out unserviceable/ damage arms complete all as specified and as shown on drawing.
140	S&F for teak wood legs of sofa sets of required size including taking out unserviceable/ damage legs complete all as specified and as shown on drawing.
141	S&F for teak wood bottom of seat & back of sofa sets of required size including taking out unserviceable/ damage bottom of seat & back complete all as specified and as shown on drawing.
142	S&F for teak wood front/rear rails of sofa sets of required size including taking out unserviceable/ damage front/rare rails complete all as specified and as shown on drawing.
143	S&F for teak wood side rails of sofa sets of required size including taking out unserviceable/ damage side rails complete all as specified and as shown on drawing.
144	REPAIRS TO SIDE BOARD FOR THE FOLLOWING (DRG NO FD-26, FD-372, FD-241,FD-371):-
145	Removing decayed top from its existing position and replace the same with new veneered particle board 18mm thick (exterior grade), grade-I quality, with 1.00mm thick plastic laminated sheet plain & wood grain pasted over particle board with approved synthetic adhesive all as shown on drawing.
146	Removing decayed wooden each leg of side board from its existingposition and replace the same with new leg made out from wellseasoned 2nd class hardwood of size 125mmX125mmX45mm complete all as shown in drawing.
147	Removing decayed back form its existing position and replace the same with new 6mm thick plywood (five Nos of ply), type BB, BWR grade complete all as shown on drawing.
148	Removing decayed shutter (single leaf) from its existing position and replace the same with 18mm thick veneered particle board (exterior grade), grade-I quality with one face teak veneer and other side commercial and 6mm thick well seasoned 1st class hard wood (Teak/Seasam) beading alround the shutter all as shown on drawing.
149	Removing decayed each side of side board from its existing position and replace the same with 18mm thick veneered particle board(exterior grade), grade-I quality with one face teak veneer all as shown on drawing.
150	Removing decayed drawer and replace the drawer made out from 18mm thick veneered particle board (exterior grade) grade-I quality,with one face teak veneer on front side and 6mm thick plywood (five Nos of ply), type BB, BWR grade on botton knob for the drawer shall be provided as approved by Engineer-in-Charge and rest all as shown on drawing.
151	REPAIR OF BOOK CASE FOR THE FOLLOWING (DRG NO.FD-45, FD-237):
152	TOPRemoving decayed top from its existing position and replace the same with new veneered particle board 18mm thick (exterior grade), grade-I quality, with 1.00mm thick plastic laminated sheet plain & wood grain pasted over particle board with approved synthetic adhesive all as shown on drawing.
153	BACKRemoving decayed back from its existing position and replace the same with new 6mm thick ply wood (five Nos of ply), type BB, BWR grade complete all as shown on drawing.
154	SIDERemoving decayed each side of book case from its existing position and replace the same with 18mm thick veneered particle board exterior grade with one face teak veneer all as shown on drawing.
155	SHELFRemoving each decayed shelf from its existing position and replace the same with new shelf made out from 12mm thick well seasoned 2nd class wooden planks all as shown on drawing.
156	SHUTTERRemoving decayed shutter (Single leaf) from its existing position and replace the same with 18mm thick veneered particle board exterior grade with one face teak veneer and other side commercial and 6mm thick well seasoned 2nd class hard wood beading alround the shutter all as shown on drawing.
157	REPAIRS TO TABLE DRESSING GENTS FOR THE FOLLOWING (DRG NO. FD/E6/MAP/16):-
158	BACKRemoving decayed back from its existing position and replace the same with new back made out from 12 mm thick veneered particle board (exterior grade), grade-I quality with commercial veneers on both faces all as shown on drawing. (Make of ply wood : Century Ply/Green Ply/National Ply/ Kit Ply as approved)
159	MIRRORRemoving broken mirror from its existing position and supply and fixingfor copper plated 5.5mm thick mirror mounted on new frame made out 12mm thick ply wood (Seven Nos of ply), type BB, BWR grade and covered by decorative mould and supported on 50mm x 28mm frame all round complete all as directed all as shown on drawing.(Make : Modiguard/Saint gobain/Atul as approved)
160	SHELVESS&F for 5mm thick glass shelves in cabinet supported on glass holders including taking down brocken shelves complete all as specified and shown on drawing.(Make : Modiguard/Saint gobain/Atul as approved)
161	MAGNET CATCHS&f for magnet catch inside the cabinet to catch mirror frame including taking down unserviceable magnet catch all as specified on drawing.
162	LEGSRemoving decayed each leg of dressing table of 38mm x 38mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak/Seasom) complete all as specified and directed.
163	SIDERemoving decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade), grade-I quality with one face teak and other face commercial veneer all as shown on drawing.(Make of Ply wood : Century Ply/Green Ply/National Ply/Kit Ply as approved)
164	REPAIR TO CHAIR DINING FOR THE FOLLOWING(DRG NO.FD-MAP-II/05):-
165	FRONT LEGRemoving of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam)all as shown on drawing.
166	REAR LEGRemoving of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
167	FRONT RAILRemoving of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
168	REAR RAILRemoving of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
169	SIDE RAILRemoving of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.
170	REAR STIFFNERRemoving of each decayed rear stiffener from its existing position and replace the same with new rear stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
171	STIFFENERRemoving of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.
172	HARD RUBBER/PVC RINGRemoving of each decayed hard rubber/PVC ring from its existing position of chair dinning and replace the same with new hard rubber/PVC ring all as shown on drawing and directed by Engineer-in-Charge.
173	SEATRemoving of decayed/wornout PVC seat from its existingposition and replace the same with new seat of size 4mm x 10mm thick ribs molded long with single frame all as show on drawing and directed by Engr-in-Charge.(Make : Brite/Cello/Supreme/Nilkamal as approved)
174	POLISHING TO FOLLOWING WOODEN FURNITURE ITEMS AS DIRECTED BY ENGR IN CHARGE:- Removal of old existing worn out polish from exposed portion of wooden surface by any means of wooden furniture including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engr-in-Charge.
175	BED WITH PLY TOP
176	CHAIR DINING
177	CHAIR WRITING
178	CHAIR CB OFFICE
179	CHAIR EASY
180	CHAIR WOODEN BOTTOM WITHOUT ARM
181	LOCKER WOODEN
182	TRESTILE STORE ROOM WOODEN
183	TABLE WRITING
184	TABLE 3\"X2\" WITHOUT DRAWER
185	TABLE 3\"X2\" WITH DRAWER
186	TABLE DINING FOR 6 PERSONS
187	TEAPOY
188	TABLE CENTER
189	TABLE DRESSING GENTS
190	TABLE DRESSING LADIES
191	TABLE 900MM X 900MM
192	TABLE BED SIDE
193	TABLE PEG
194	SOFA SET FIVE SEATER
195	SIDE BOARD
196	BOOK CASE
197	TABLE DRESSING GENTS MAP
198	CHAIR DINING JCO OR MAP

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Furniture Tenders

Furniture Items Tenders

Wooden Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair, Polishing And Rescanning Of Various Wooden Furniture At Mil Stn Kanchrapara Under Ge Barrackpore, Barrackpore-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair, Polishing And Rescanning Of Various Wooden Furniture At Mil Stn Kanchrapara Under Ge Barrackpore, Barrackpore-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us