|
| 1 | Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loosesoil complete all as specified. |
| 2 | M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation filling, mass concrete of manholes, posts etc completeall as specified. |
| 3 | Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified. |
| 4 | Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed. |
| 5 | M&L cement concrete 1:3:6type C 2 (20mm graded stone aggregate)as in sub base, hard standing of75mm thick, complete all as specified. |
| 6 | M&L for brick work with sub class \"B\" brick straight or curved on plan exc6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 7 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar1:4, complete all as specified. |
| 8 | M&L for 15 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:4 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) finished even and fair etc complete all as specified and directed. |
| 9 | M&L Rendering 10 mm thickin CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 10 | M&L Rendering 5 mm thickin CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 11 | M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 to 2mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth Exterior Paint of required shade : New work (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm) complete all as specified as directed by Engr-in-Charge. |
| 12 | M&L for preparing Newly plastered surfaces and apply a coat of 1 to 2 mm (1.5mm average) thick wall care putty for making smooth surface and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls complete all as specified as directed by Engr-in-charge. |
| 13 | M&L Preparation ofnew plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 14 | S & F for ventilator outer frame 40mmx40mm with 1.3mm thickness, corner 45degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone |
| 15 | M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 16 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/ 300x200xx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed. |
| 17 | S&F 15mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scafolding, cutting chases in wall where ever required etc complete. |
| 18 | S & Fvitreous China squatting pan,‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete includingmaking good to floor |
| 19 | S&F10 ltrs capacityPVCcolour low level flushing cistern withPVC flush pipe 32mm dia complete all as specified |
| 20 | S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified |
| 21 | S&F in repair chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified. |
| 22 | S&fPVC connection pipe of 15mm x 600mm long with 2 Nos brass check nuts with washers, complete all as specified. |
| 23 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 25 | S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) |
| 26 | S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked) |
| 27 | S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked) |
| 28 | S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified. |
| 29 | S & F 100 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified. |
| 30 | S&F110mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified. |
| 31 | S&F Salt GlazedStoneWare (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified. |
| 32 | S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer(cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 33 | M & L Cement concrete type B-2 1:3:6 (40 mm graded stone aggregate) as in plinth protection, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&Lreinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like including bonding agent , complete all as specified |
| 35 | M&L form work to roof slab, chajja, weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat, etc. complete all as specified and directed. |
| 36 | M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified. |
| 37 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 38 | Impregnating cream for injection into masonry or concrete wall 230 mm thick against capilary rising humidity complete all as specified and directed. (make: RIsing bar super strong of chowgale or equivalent) Method of Applicaion Methodology (a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debris, or any separation layers.(b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area.(c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. All sharp edges/joints need to be levelled ; loose concrete to be removed.(d) Drill boreholes at ground level horizontally. The boreholes are drilled horizontal into the masonry. |
| 39 | S&F DWCPE(SN8) 150mm dia (Internal Dia)pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified. |
| 40 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia pipe, complete all as specified. |
| 41 | S&F for Precast plastic fibre RCC Manhole cover with frame medium duty of overall ize 450 x 450 x 50mm factory made Make Poly crete. |
| 42 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 finished even and smooth without using extra cement complete all as specified. |
| 43 | S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mmsection window grill as per approved sample and as per IS specificationsjoining cleat for fixing etc. complete all as specified |
| 44 | S&FPowder aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified. Note :- The quoted rate shall include glass, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. |
| 45 | M&L for false ceiling in repairs using plain galvanized steel ceillling system consisting of 600x600 mm lay in tiles of pre-coated galvanized sheet 0.5 mm thick in white or colour to be laid on grid system with 15 mm wide T section of size 45x15 mm flanges having rotray stiching on the main runner tie, arm runner spaced 600 mm centre flush fitting 600 mm long cross tees to be interlocked between runner at 600 mm centre to form 600 x 600 mm module perimeter trim to be wall angle od size 3000x45x15 mm secured to wall and including suspension system as per manufacturer instruction complete all as per specified and directed including dismantling of existing false ceiling. |
| 46 | M/Lfor 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels to 2mm thick with Single Side Prelam PVC sheet duly fitted into the wall as per specificationscomplete. |
| 47 | Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified. |
| 48 | Supply only Mild steel in flat, round or square bars, in available lengths Fe 450 W (Gde E-250 quality A) |
| 49 | S&F in MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming toFe -290 Gde E-165 comple all as specified and directed. |
| 50 | S&F Chain link MS galvanisd fencing, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire any size or type complete all as specified and directed. |
| 51 | S&F Mild steel screw bolts (machine made) any dia size with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and directed. |
| 52 | M & L for painting new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of red oxide complete all as directed. |
| 53 | S & F 5.5 mm thick sheet glass selected quality and glazing with oil putty in squareds exc 0.50 sqm in each pane complete all as specified and directed. |
| 54 | S & F stainless steel wire cloth (SS304 grade) 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples with wooden/aluminium beads/screws to window/door complete |
| 55 | S&F mild steel framedworksuch as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge. |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm complete all as specified and directed. |
| 57 | M&L rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cementincl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster. Note: The work to be executed at the hieght of 12 to 15 mtr the rate for necessary scaffolding deemed to be included in the qouted rate. |
| 58 | Supply and fixing of powder coated deco grill for aluminium window all as specified by Engr-in-charge. |
| 59 | M & L two coat with distemper oil emulsion over a coat of primer on new plastered surface on wallall as specified and directed. |
| 60 | Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified |
| 61 | M & L Vetrified ceremic light colour tiles 10 mm thick (squire/rectangular) polished area of each tiles n\" exc 0.36 sqm in floors over 15 mm thick screed bed in CM (1:6) etc set and jointing in neat cement slullry and pointed in white or coloured cement to match complete all as spd and directed |
| 62 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 |
| 63 | S&F plates (plain or chequered)channels squares cut or notching attached to beam or tee confirming to Fe.410.Gde-E-250 complete all as specified and as directed by Engr-in-Charge. |
| 64 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 65 | Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge |
| 66 | M&L Hardcore ofbroken stone of gauge n. exc 63mm deposited, spread and levelled in layers not exc 100 mm thick watered and rammed to a true surface complete all as specified and directed. |
| 67 | M&L 75mm thick PCC (1:4:8) Type D2 (using 40mm graded crushed stoneaggregate) as in sub floor complete all as specified and directed |
| 68 | Sand filling under floors or in foundations including watering and consolidations complete all as specified and directed. |
| 69 | M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 70 | M & L Providing, Type B1 (1:2:4) 20 mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edgesin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, hold fast, kneelers, apex stones, bed plates, kerbs not provided for in Item04028, water troughs and the like including eathering, slightly rounded or chamfered angles and throating, as directed |
| 71 | Cutting channels, grooves or rebates n exc 15 cm girth, and trimming surface with reiforcement |
| 72 | Surfaceexcavation n exc 30 cm deep andaveraging 15 cm deep getting out in soft/loose soil complete all as specified and directed. |
| 73 | M& L PVC moulded cement concrete Chequered cement concrete colourtiles 30 cm x 30 cm x 25mm thick with mixture of grey cement & pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed inC M 1:6 complete all as specified and as directed. |
| 74 | M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified. |
| 75 | M & L Cement concrete type C2 1:3:6 (40 mm graded stone aggregate) as in sub base, 100 mm thick complete all as specified and directed. |
| 76 | Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. |
| 77 | M&L for coloured ceramic tilesof size 600x600x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 78 | M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 79 | M&L for colouredglazed ceramic tiles 300x600 x 7 to 8mm / 300x450 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 complete all as specified and directed. |
| 80 | M&L for 18-20mmthick coloured granitestone work Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite. |
| 81 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). complete all as specified and directed. |
| 82 | S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 83 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 84 | S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 85 | S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed. |
| 86 | S&F in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 87 | S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed . |
| 88 | S&F4.00 mmthick figured glass, pin head type andglazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified |
| 89 | S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 90 | S&F in repair vitreous china squatting pan of orissa pattern long pan size580 x 440 mm white with \"p\"or \"S\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. |
| 91 | S&F in repair of 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified. |
| 92 | S&F in repair of 110 mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified. |
| 93 | S&F sinks made of stainless steel 1mm thick kitchenwith plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 94 | S&F bib tap, cast copper alloy chromium plated, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore diacomplete all as specified and directed. |
| 95 | Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified |
| 96 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 97 | S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all asspecified. |
| 98 | S&F100mm long, extruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified. |
| 99 | S&F in Soft closing ball bearing telescopic channel of size 20 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 100 | “S&F Modular Cabinet Kitchen accessoriesof Stainless Steelgrade-304,6mm size rod thicknessincluding :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket,(iv) Cup & saucer basket, (v) Glass basket,(vi) Plate basket, (vii) Premium magic corner(viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all spd and directed by Engr in charge |
| 101 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed |
| 102 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) by using diamond saw blade cutting machine without damaging adjacent RCC structures not otherwiseincluding removal of rubbish outside complex ( MOD land), complete all as specified. |
| 103 | S&F 150mm long stainless steel barrel tower boltofextruded section, complete all as specified. |
| 104 | Taking up or down 15 mm dia GI tubing and connectionscomplete all as specified. |
| 105 | S&F in repair fancy type 15mm dia chromium plated quarter turn fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as directed. Make Jaquar FLR5309N ,CERA F1003501,Hindware F570027 |
| 106 | S&Fin repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160m |
| 107 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 108 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. |
| 109 | S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed. |
| 110 | M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes of cement plaster 1:6 complete all as specified and directed. |
| 111 | S&F Roof trusses (framed), truss, framedbrackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge |
| 112 | S & F Brass CP health faucet hand shower type with 8mm dia 1.2 Meter long Flexible Tube and Wall Hookscrewed for iron pipe fancy type long body all as specified and directed. |
| 113 | S&F in repairs vitreous chinaware coloured wall hungwash hand basin with fullpedestalofsize 550mm x 400mm complete including, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Eng in charge. |
| 114 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified. |
| 115 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. |
| 116 | S&F in repair CP grating 125mm dia, complete all as specified. |
| 117 | S&F in repair aluminium peg set of 6 peg, 45 centimeter long, complete all as specified. |
| 118 | S&F in repair15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. |
| 119 | S&F in repair fancy type 600mmx450mm bevelled edge mirror of selected quality glass mounted on 4mm thickand rectangular shape and fixed to wooden plugs with chromium plated brass screw and cupwashers, all as specified. |
| 120 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .Make: Cardin or Equivalent |
| 121 | Cleaning and drying the brick surfaces, and make it dust free. Prewetting the surface with water before application of Dampblock 2k, and then applying a skim coat of polymerised putty and after drying 2 coats of Smartcare dumpblock 2K @1.5 Kg/ Sqm. (Application ofplaster shall be measured and paid in appropriate item). |
| 122 | M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall& including nonmetalic rigid newPVC conduitmedium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVCinsulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :Make of Wire :Gloster/Havells/ Polycab/Finolex (Premium) |
| 123 | All as per Item No 122 above but one light/fanpoint controlled by one by one way switch. |
| 124 | All as per Item No 122 above but one 3 pin socket outlet 5 hole 5 Amp independent board , socket & switches to be measured and paid separately. |
| 125 | All as per item No 122 above but One bell point controlled by one bell push |
| 126 | All as per item No 122 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 127 | All as per item No 122 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15/16 A socket outlet point on independent board complete all as specified and directed by Engineer in charge. |
| 128 | One power point with insulated stranded copper conductor cable 4 Sqmm single core for 3 pin 15 Amp switch socket and PVCinsulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmmin and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete. |
| 129 | M&L switch piano flush type 6 Amp SP one wayISI marked complete all as specified. |
| 130 | M&L socket outlet flush type 6 Amp SP one wayISI marked complete all as specified. |
| 131 | M&L switch piano flush type 16 Amp SP one wayISI marked complete all as specified. |
| 132 | M&L socket outlet 2 in 1,3 pin 6/16 AmpsISI marked complete all as specified. |
| 133 | M&L ceiling rose 3 phase PVCpolycorbonate,isolated body. complete all as specified. |
| 134 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts,check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 135 | Supply and fixMCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete. |
| 136 | M&L MCB SPN 40 Amp \"B \" curve all as specified. |
| 137 | M&L MCB SP 6 to 32 Amp \"B\" curve all as specified. |
| 138 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 139 | Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover.System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70.The luminaire is IP:66 protected with IK05 impact resistance.It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete |
| 140 | S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 141 | Material & labour forinstallation, testing & commissioningXLPE insulated PVC sheathed armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 2.0core complete all as specified and directed. Make-Havells/ Polycab/ Plaza/Gloster |
| 142 | S&F inGI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 25 mm dia complete for protection of LT UG cable all as specified and directed. Make-Jindal/ Hindustan/ TATA |
| 143 | Supplying laying sand cushioning for cable protection in trenches 8 cm thick layer before laying cable and 15 cm thick layer over the cable including well punning complete all as specified and directed. |
| 144 | Supplying only sub class ‘B’ bricks old size (23 x 11.5 x 7.5) CM with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed. |
| 145 | S&Fswitch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge. |
| 146 | M&L for switch Modular type 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge. |
| 147 | M&L in replacement Modular socket outlet 2/3 pin 6/16Amp universal socket 2 module complete all as specified and directed by Engineer in charge. |
| 148 | S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge. |
| 149 | M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified. |
| 150 | M&L bell electric (ding dong) 230 volt, SPall as specified and directed. |
| 151 | M&L for Sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed |
| 152 | S&F of modular AC Box consisting of 20 Amp multipower socket including MCB of capacity 25 Amp mini MCB, ‘C’ curve, single phase 240 V, AC including modular box, frame, cover plate including plug top with indicator complete all as specified and directed . |
| 153 | S&F wall mounted angular Electric chimney black colour of suction power not less than 1050Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speedmotor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent Led light with digital display , including ducting it can be open at least upto 20 feet as per site required complete all as specified and as directed by Engr-in-Charge Make: Elica model kitty Plus or equivalent in kaff/ Hindware |
| 154 | Supply and fix loop in /loop out box of suitable size PVC moulded terminal box withlocking arrangement comprising of one 4 way conncetor all as specified and directed |
| 155 | Supply and fixing Garden light ofintegral decorative with white Dome typeof height 0.6 meterwithsuitable for single phase 230 volts 50 HZ AC Supply including LED bulb for Dome WHITE , Poles/GI Pipe of height 0.6 meter and painted, making foundation for garden light size 250mmx250mmx400mm cement work complete all as specified and directed . |
| 156 | Supply &fix LED Post Top latern lights ,25W ,single phase with decorative LED post top latern lights luminaire with diffuser and painted spun aluminium deflector pre wired and provision of twin core flexible wire,copper conductor of 0.5 Sqmm from light fitting to loop in box complete all as specified and as directed. |
| 157 | S&F MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link completeNote:-(i) MCB shall be measured & paid separately (ii) make of DBs & MCB should be same |
| 158 | S&F MCB SPN 40 to 63 Amps 240 volts 10 KA 50 HZ \"C\" curve complete. |
| 159 | S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ \"C\" curve complete. |
| 160 | Supply,laying PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 6 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete. |
| 161 | S&F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 50 mm and inner dia of 32 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed. |
| 162 | S&F Instant Hot Water Geyser 3 Ltrs capacity,3 KW with corrosion proof thermoplastic external body ,ISI approved with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connectioncomplete all as specifiedand directed by Engineer -in-charge. |
| 163 | Schedule of Credit |
