|
| 1 | Excavation in trenches in any type of soil, not exc 1.5 mtr deep and not exc 1.5 mtr wide for foundations, manholes, laying of under ground cable, pipe, electric pole etc. and getting out, complete all as specified and directed. |
| 2 | Returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in thick, complete all as specified and directed. |
| 3 | Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 4 | M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick including watering and ramming to a true surface, complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, mass concrete, filling in etc, complete all as specified and directed. |
| 6 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, sub base of floor etc, finished the surface even abd smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floors, finished the surface even abd smooth without using extra cement, complete all as specified and directed. |
| 8 | M&L for 50mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 9 | M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:4, complete all as specified and directed. |
| 10 | M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 11 | M&L for half thick brick work with sub class \"B\" brick, old size, built in CM 1:4, complete all as specified and directed. |
| 12 | Taking down cement plaster on brick walls, stone masonry/ walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 13 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed.Note :- WPC shall be measured and paid separately. |
| 15 | M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 16 | Supply only integral water proofing compound, complete all as specified and directed. |
| 17 | M&L for preparation of new decorated surfaces of walls and applying two coats of cement base paint over one coat of wall care putty 2-3mm thick and one coat of primer, complete all as specified and directed. |
| 18 | M&L for preparation of new decorated surfaces of ceiling and applying two coats of cement base paint over one coat of wall care putty 2-3mm thick and one coat of primer, complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of wall care putty 2-3mm thick and primer, complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 21 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 22 | M&L for mild steel TMT bars, 5-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 23 | Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 24 | M&L for reinforced cement concrete 1:1.5:3 (Nominal Mix) type A-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves etc, complete all as specified and directed. |
| 25 | M&L for reinforced cement concrete 1:1.5:3 (Nominal Mix) type A-1 (using 20mm graded crushed stone aggregates) as in columns, pillars etc, complete all as specified and directed. |
| 26 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo, dado and skirting etc. on brick, concrete or stone walls including racking out joints, hacking for key and scrubbing down and removing serviceable tiles to store and rubbish off the premises etc, complete all as specified and directed. |
| 27 | M&L for 10mm thick vitrified ceramic tiles, double charged, dark shade, colour as approved, square or rectangular, poliahed, area of each tile exc 0.42 Sqm but not exc 1.0 Sqm each in floors, skirtings etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick bedding layer/ plaster in CM 1:4, complete all as specified and directed. |
| 28 | M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm each as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick bedding layer/ plaster in CM 1:4, complete all as specified and directed. |
| 29 | M&L for glazed ceramic coloured tiles, size 450x300x7mm as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. |
| 30 | S&F solid PVC wall lining (wall paneling), consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. |
| 31 | M&L for reinforced cement concrete 1:1.5:3 (Nominal Mix) type A-1 (using 20mm graded crushed stone aggregates) as in lintels beams and roof beams etc, complete all as specified and directed. |
| 32 | Use and waste of formwork to sides of rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed. |
| 33 | M&L for reinforced cement concrete 1:1.5:3 (Nominal Mix) type A-1 (using 20mm graded crushed stone aggregates) as foundations, foundation beams, plinth beams, bases for columns and mass concrete, complete all as specified and directed. |
| 34 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc, for rough finished surfaces of concrete, complete all as specified and directed. |
| 35 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.), complete all as specified and directed. |
| 36 | S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed. |
| 37 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate \"Z\" sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 38 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed. |
| 39 | S&F 5.5mm thick sheet glass ordinary quality & glazing with oil putty in square exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 40 | S&F 5mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in square exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 41 | S&F 5.5mm thick frosted / tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/ windows in square/rectangular, area exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 42 | S&F 5.5mm thick frosted / tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/ windows in square/rectangular, area not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 43 | S&F aluminuim anodised barrel tower bolts with bright both, size 150mm long, complete all as specified and directed. |
| 44 | S&F 150mm long alunminium handle, cast type, oval shape, complete all as specified and directed. |
| 45 | S&F mild steel mortice lock 4 levers vertical type 100mm size, complete all as specified and directed. |
| 46 | Taking up or down 15mm bore steel water tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 47 | Taking up or down 20mm bore steel water tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed. |
| 48 | S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 49 | S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 50 | S&F 1000 ltrs capacity tripple layered rotational moulded polyethylene water storage tank, white colour (cylindrical vertical with closed top) with, hoisted and fixed in position including nipple inlet and outlet and conneting pipes, complete all as specified and directed. |
| 51 | S&F 15mm dia bib tap, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 52 | S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for 20mm bore iron pipe (min weight 210 gms), complete all as specified and directed. |
| 53 | S&F stop valve, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends, fixed to 15mm bore iron pipe, complete all as specified and directed. |
| 54 | S&F 10 litres capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 55 | M&L for 75mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears with cement joint, laid in floors or in trenches, complete all as specified and directed. |
| 56 | S&F 50mm bore cast iron bend (any radius) diminishing pieces or tapers (large bore measured) with oval access doors, complete all as specified and directed. |
| 57 | S&F 50mm bore cast iron branch pieces, single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access doors, complete all as specified and directed. |
| 58 | S&F viterous china wash basin, Oval Counter type, white, flat back, size 560mm x 400mm including CP waste couping of 32mm dia, chain and plug and porcelan stopper and Cl brackets of iron 65x65x6mm, embedded in PCC block with PCC 1:2:4 type B-1 and including 450mm long PVC waste pipe getting with holes, complete all as specified and directed. |
| 59 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like one piece full or any other work as directed, in cement mortar (1:4) including pointing in white cement (1:2) with using marble dust with admixture of pigment to match with shade of granite, fixed over and including 15mm thick screed bed/ plaster in CM 1:4, complete all as specified and directed. |
| 60 | Rounding off / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed. |
| 61 | M&L for 18/19mm thick prelaminated particle board, medium density, flat pressed, single layered type or three layered type with BWR type adhesive, complete all as specified and directed. |
| 62 | S&F magnet catcher 50mm size steel plate MS body and striking plate including letting in & fixed, complete all as specified and directed. |
| 63 | S&F stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges), fixed to shutters in cupboards of standard size and shape, suitable for modular kitchens, complete all as specified and directed. |
| 64 | S&F PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed. |
| 65 | S&F PVC connection of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed. |
| 66 | M&L for 150mm x 150mm size cast iron gully trap, square or round mouthed type \"P\" with PCC and grating, complete all as specified and directed. |
| 67 | S&F soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, complete all as specified and directed. |
| 68 | S&F centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure with lettered \"Hot\" & \"Cold\" with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed. |
| 69 | S&F PVC bathroom mirror cabinet, quality as approved, size 600mm x 400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated, fixed with SS screws and wooden gutties etc, complete all as specified and directed. |
| 70 | S&F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screws, complete all as specified and directed. |
| 71 | S&F tumbler holder, brass, chromium plated, heavy duty, having suitable recesses made for hanging necessary bath items, fixed with brass screws,complete all as specified and directed. |
| 72 | S&F health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed. |
| 73 | S&F corner glass self (with CP brakets), size 225mm x 225mm, complete all as specified and directed. |
| 74 | S&F brass chromium plated towel ring, round of 200mm dia, fixed with SS screws, complete all as specified and directed. |
| 75 | S&F in replacement of angle valve, brass, chromium plated, fancy type with capstan head handle, screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 76 | S&F hand shower, 90mm dia round shape (telephonic type shower), chromium plated with 1500mm long of 15mm bore chrome finish flexible pipe with wall hook,complete all as specified and directed. |
| 77 | S&F bib tap, brass, chromium plated, fancy type, long nose with capstan head handle, screwed down high pressure including CP brass wall flanges, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 78 | S&F 20mm dia brass chromium plated tubular towel rail, \"D\" type, 60cm long between flanges, fixed with SS screws, complete all as specified and directed. |
| 79 | S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf ,12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 80 | S&F vitreous china wash down water closet pan \"P\" or \"S trap (pedestal pattern) white including fixing bolts, connection to \"P\" or \"S\" trap etc. to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed. |
| 81 | Cutting into existing manholes for connecting new drain pipe of 150mm internal dia, making good pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required, complete all as specified and directed. |
| 82 | M&L for 150mm bore salt glazed stoneware (SGSW) drain pipes, laid in trenches and jointed, complete all as specified and directed. |
| 83 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to 150mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested including necessary shuttering sopports, complete all as specified and directed. |
| 84 | M&L for 100mm bore cast iron spun soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors or fixed to walls, complete all as specified and directed. |
| 85 | M&L for 75mm bore cast iron spun soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors or fixed to walls, complete all as specified and directed. |
| 86 | S&F stack clamps, made out of 50mm by 5mm thick flat iron and 16mm dia round iron stays including bolts, nuts and securing ends of stays to wall or roof, suitable for 100/110mm bore pipe, complete all as specified and directed. |
| 87 | S&F stack clamps, made out of 50mm by 5mm thick flat iron and 16mm dia round iron stays including bolts, nuts and securing ends of stays to wall or roof, suitable for 75mm bore pipe, complete all as specified and directed. |
| 88 | S&F in replacement of 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, suitable for cast iron soil waste pipe, complete all as specified and directed. |
| 89 | S&F in replacement of 75mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, suitable for cast iron soil waste pipe, complete all as specified and directed. |
| 90 | M&L for damp proof coarse membrane impervious strong durable dimensionally stable and free from deliquescent salts, following DPC IS 3067:1988, complete all as specified and directed. |
| 91 | S&F 110mm bore PVC (SWR) bends of any radius, fixed with rubber ring joint, complete all as specified and directed. |
| 92 | S&F wall mounted rectangular backlit Digital LED mirror with touch sensor, LED lighting type, size 24 inches x 18 inches, tripple lights features, complete all as specified and directed. |
| 93 | S&F ceramic whte wall hung type manual urinal, size 355mm x 340mm x 535mm, fixed with suitable means as directed, complete all as specified and directed.Make :- Jaquar Model No. URS-WHT-13261H or equivalent make as listed in Appendix \"G\" to Particular Specifications of the tender. Note :- Make & Model of urinal shall only be decided and approved by GE. No extra claims whatsoever shall be entertained on this account. |
| 94 | M&L for 250mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, omplete all as specified and directed. |
| 95 | S&F in replacement of single lever wall mixer 3 in 1 with provn of over head shower & hand shower, telephonic type, brass, chromium plated, fancy type with capstan head handles with lettered \"hot and \"cold\", screwed down high pressure including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection with provision for both hand shower and over head shower, complete all as specified and directed. |
| 96 | S&F shower rose, brass, chromium plated with CP arm, 120mm dia with or without swivel joint with & including CP brass arm and wall flange, fixing to 15mm bore steel pipe or union, complete all as specified and directed. |
| 97 | M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking coloured paver block, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified and directed. |
| 98 | M&L for sand filling under floors, paver blocks or in foundations including watering, ramming and consolidation, complete all as specified and directed. |
| 99 | S&F touch panel, panel 3096834RHP body shower shower with exposed part kit of cloud touch shower system30966 IC, shower tube SHA-549B8 with shower hook SHA-555 with Ceiling shower -85857 with shower encloser, complete all as specified and directed.Notes :- (a) Cat Part No. / Model mentioned hereinabove shall be of Jaquar Make only.(b) All make / Model mentioned hereinabove shall be approved by GE before fixing/ installation at site. |
| 100 | M&L for 18-20mm thick machine cut kota stone slab flooring, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges if required, laid/ fixed over and including 20mm thick screed bed in CM 1:3, complete all as specified and directed. |
| 101 | M&L for 18-20mm thick machine cut kota stone slab as in skirtings, dados, walls, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges if required, fixed over and including 15mm thick plaster in CM 1:4, complete all as specified and directed. |
| 102 | M&L for 18-20mm thick machine cut kota stone slabs as in flooring with and including 15-16mm thick & 80mm wide white marble stone/slab as in border along to wall, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 103 | M&L for 20-25mm thick machine cut kota stone slab as in riser with bull nose, skirtings, dados and pillar, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting, rounding edging and polishing, fixed over and including 15mm thick plaster in CM 1:4, complete all as specified and directed. |
| 104 | M&L for washed stone grit plaster on exterior walls in two layers under layer 12mm thick in cement mortar 1:4 (1 part cement : 4 parts coase sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm thick in cement plaster 1:1/2:2 in panels with groove all around as approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chipping including taking down existing grit plaster and preparation the surface, complete all as specified and directed. |
| 105 | Taking down chowkats or frames with shutters (without taking off shutters from frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 106 | Taking down chowkats or frames with shutters (without taking off shutters from frame), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 107 | S&F stainless steel baskets of Grade 304, fixed to wall or in floors including necessary scutting holes and fixed with suitable epoxy resin in vertical/ horizontalposition, cut to length required and welded including stainless steel handles, complete all as specified and directed. |
| 108 | S&F aluminium composite panel of thickness 8mm on stainless steel cabinets as a decorative or protective covering over the stainless steel cabinets, complete all as specified and directed. |
| 109 | S&F in replacement of drawer side channel of std size and including of roller for moving drawer, mild steel bright finish or electrogalvanised, width of flap 30mm, suitable for modular kitchen, complete all as specified and directed. |
| 110 | S&F in replacement of stainless steel multipurpose bracket in wooden drawer/ partitions for storing rations of various types, made of 4mm dia stainless steel rods, fixed in side partitions etc. suitable for modular kitchen, complete all as specifiedand directed. |
| 111 | S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 112 | S&F waste pipe of dia 40mm, suitable for WHB/Sink, complete all as specified and directed. |
| 113 | S&F 40mm bore CP brass waste coupling, suitable for kitchen sink, complete all as specified and directed. |
| 114 | S&F CP brass grating of 100mm dia with centre hole, complete all as specified and directed. |
| 115 | S&F in replacement of sink with drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including 32mm dia CP brass waste coupling and waste pipe and bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 116 | Demolition of stone slabs and tiles, laid dry or dry beded or pointed of any description or thickness as in floors, aprons etc, complete all as specified and directed. |
| 117 | Taking down carefully point wiring copper/ aluminium (light, fan, socket and power) complete (fittings such as switches, ceiling roses, pendent, regulators, sockets etc, tobe measured and paid for separately) and removing materials to store for keeping of safe custody and making good the disturbed surfaces, complete all as specified and directed. |
| 118 | Dismantling and taking down fluorescent tube lights, single/double of any wattage or size fittings for repair or replacement of burnt/worn out accessories or carrying toMES store for reuse or taking in schedule of credit, complete all as specified and directed. |
| 119 | Taking down unserviceable / serviciable MCB DB\"s/ AC\"s box including MCCB/ MCBs taking in schedule of credit of any size/rating, complete all as specified and directed. |
| 120 | M&L for point wiring (modular) with using approved colour coding as per IS Code (Red, Black and Green for single phase circuit) with multi stranded copper condutor 1.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, in and including medium grade PVC concealed conduit ISI marked of dia not less than 25mm with conduilt accessories, concealed in wall/ roof/ floor etc. with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches, sockets, fan regulators etc. and PVC insulated multistranded copper condutor 1.5 Sqmm nominal cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed for the followings :- (a) One light point, controlled by one SP switch. |
| 121 | All as per serial item No. 120.00 here-in-above but one exhaust fan point, controlled by one SP switch. |
| 122 | All as per serial item No. 120.00 here-in-above but one 3 Pin 5 Amp socket on independent board. |
| 123 | M&L for point wiring (modular) with using approved colour coding as per IS Code (Red, Black and Green for single phase circuit) with multi stranded copper condutor 2.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, in and including medium grade PVC concealed conduit ISI marked of dia not less than 25mm with conduilt accessories, concealed in wall/ roof/ floor etc. with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for one 5 pin modular socket outlet two in one 16/6 Amps etc. and PVC insulated multistranded copper condutor 2.5 Sqmm nominal cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed. |
| 124 | All as per serial item No. 120.00 here-in-above but for geyser point wiring with using 4 Sqmm wire on independent board including 4.0 Sqmm multi stranded copper conductor earth wire connected to common earth/earth dolly. |
| 125 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 to 32 Amps, 240 volt capacity, complete all as specified and directed. |
| 126 | S&F modular switch one module, 5/6 Amps, one way, 230 volts, AC, complete all as specified and directed. |
| 127 | S&F modular socket 6 Amps, 5 pin, flush type, 240 volts with polycarbonate body, complete all as specified and directed. |
| 128 | S&F modular socket outlet, 5 pin, 6 Amps and 15 amps, multipurpose, 2 in 1, flush type, 230 volts with polycarbonate body, complete all as specified and directed. |
| 129 | S&F modular switch single pole, one way, 16 Amps, 240 Volts with polycarbonate body, complete all as specified and directed. |
| 130 | S&F ceiling rose, 3 phase, PVC / polycarbonate, surface type, 65mm x 50mm size, insulated body, three terminal, complete all as specified and directed. |
| 131 | S&F 20 Watt LED light fitting, high quality materials and design, extruded aluminium housing enhances safety with high quality PC diffusers, reliable and robust housing structure, maximize the endurance over the lifetime slim integrated design, easy to install, Efficacy : 120 Im/W CRI > 80, PF>95 CCT - 6500K and also available in warm white and natural white complete making all connection with using 1.5 Sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose, complete all as specified and directed. |
| 132 | S&F 10 Watt LED mirror light fitting, robust and high performance batten, LED luminaire comprises of extruded channel in thermally conductive material, high translucent serrated milky white diffusers used to get glare free and smooth light distribution. Efficacy : 120 Im/W CRI > 80, PF>95 CCT - 6500K and also available in warm white and natural white complete making all connection with using 1.5 Sqmm copper conductor multistranded PVC insulated 2 Core flexible cable from ceiling rose to fitting, complete all as specified and directed. |
| 133 | S&F in replacement of 35 Watt LED security light fitting with ASTRA NEO, street lights are made up of pressure die cast housing with toughened glass and high power LED with secondary optics and IP-66 protection with and including 0.60 mtr long 20/25mm bore (as per manufacturer\"s standard) GI Pipe in 45 degree bend shape and necessary clamping devices as required at site, complete all as specified and directed. |
| 134 | S&F in replacement of 35/36 Watt ceiling mounting LED warm/ white light fitting, Vector Series tiles allow you to create beautiful pattern on your ceiling. Seamless integration with ceiling, easy maintenance, high system efficacy makes it a hassle free choice for office spaces alonwith 3 CCT options & convert your ceiling into a beautiful piece of art. Product image with illustration of 4 is shown for reference suitable for Armstrong /grid /ceiling, complete all as specified and directed. |
| 135 | S&F in replacement of focus light and aesthetic, polyster coated aluminium housed in ground/bush light, offers safe and bibrant parking areas, pathway and garden with high illumination 8 Watt, Gesto Wall Lights IP-65 Waterproof Wall Lamp - 2 Way Exterior Wall Light for Decoration/ Up Down Light for Balcony. Outdoor Wall Lights for Elevation, Garden & Patio Lights complete making all connections using 1.5 Sqmm copper conductor multi stranded PVC insulated two core flexiable cable with flexiable PVC pipe, complete all as specified and directed. |
| 136 | S&F in replacement of MCB SPN DB, IP-43 protection, metalic distribution doard, suitable for MCB as incomer, 12 Way, 240 Volts AC, double door type of sheet steel phosphotised powder painted with 160 Amps, neutral bars, earth bar, concealed flush in wall, complete all as specified and directed. |
| 137 | S&F MCB metalic distributition board, 4 Way, double door, 230 Volts, concealed flush to wall for mounting MCBs, the DBs shall be of IP-43 protection, complete all as specified and directed. |
| 138 | S&F MCB single pole and neutral, 240 Volts, 63 Amps, breaking capacity 10 KA, \"B\" Series, complete all as specified and directed. |
| 139 | S&F MCB single pole and neutral, 240 Volts, 40 Amps, breaking capacity 10 KA, \"B\" Series, complete all as specified and directed. |
| 140 | S&F MCB single pole, 240 Volts, 6 to 32 Amps, 50 Hz, breaking capacity 10 KA, \"B series, complete all as specified and directed. |
| 141 | S&F exhaust fan, heavy duty, steel body, copper windind, double bearing, AC, single phase, size 300mm sweep with iron frame and iron louver and connection, complete all as specified and directed. |
| 142 | M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth lead wire of GI of 4mm dia by means of nuts, bolts and washers, check nuts of galvanized iron or steel including 15mm bore GI pipe light grade upto 1.5 mtr below GL as protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PG funnel and wire mesh, complete all as shown in electrical plate No. 5 of SSR Part-l, connected to earthing test point including testing on completion, complete all as specified and directed. |
| 143 | Supply, laying/ fixing and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 Core, as in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match with existing surfaces and including taking out/ down existing cable, complete all as specified and directed. |
| 144 | M&L for dry river sand as in cushioning to underground cables, provided with a layer of sand 8cm thick before laying the cable and 15cm thick after laying the cable and stretching the cable, complete all as specified and directed. |
| 145 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, flat type, size 250mm x 150mm x 40mm, complete all as specified and directed. |
| 146 | M&L for 40mm bore GI pipe light grade with all fittings as required for protection of underground cable including cutting of road surface wherever required and making good to match with existing surface, complete all as specified and directed. |
| 147 | Supply, installation and testing of Auto Clean Glass Chimney Filter-less with Heat Sensor, BLDC Motor 1600m/h. The Glass chimney in black finish shall be designed to blend with your kitchen interiors Filterless. The Suction Capacity of chimney shall be of 1600 meter cube per hour effectively throws away smoke & odor from the kitchen in one go, making it fume-free, so enjoy cooking minus. The Smoke Chimney shall be equipped with Motion-Sensing Tech which ensures no hassle while you use it. Operate the chimney with a wave of your hand. It\"s Touch Sensor Control access the light and the auto-clean function. The chimney comes with a Removable Oil Collector tray which effectively collects grease as well as oil drops. As a result, it can be cleaned easily & assembled back once dried. Heat Sensor :- The chimney shall be equipped with heat sensor that automatically turns on the chimney after sensing heat from the cooktop/hob. Intelliclean :- The feature helps periodically clean the chimney after every 15 hours of usage, when the chimney is on standby mode. and the Intelliclean function will automatically start the cleaning cycle. Once the cleaning cycle is completed, the chimney will come back on standby mode. The Intelliclean cycle shall be interrupted if the user wants to use the chimney for cooking. The Intelliclean function will run the cleaning, complete all as specified and as per manufacturer\"s specifications.Notes :-(a) Make & Model of the chimney shall only be decided and approved by GE. No extra claims whatsoever shall be entertained on this account. (b) The chimney shall be installed, fixied at site by manufacturer\"s technician(s) only and cost for the same shall be deemed to include in the quoted rates. |
| 148 | M&L for concealed sub main wiring with two runs of 4 Sqmm 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor, confirming to drawn through and including non-metalic PVC rigid conduit pipe not less than 25mm dia with all conduit accessories, mounting on suface of walls /roofs / ceiling including cutting chasing and with one run of 4 Sqmm single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, complete all as specified and directed. |
| 149 | S&F Epsilon 36 Watt Cool White Indoor Lighting, suitable for illuminate your home with, deal for indoor use, incandescent bulb from the Epsilon series emits a cool white light with a Correlated Color Temperature of 5700K with a power of 36 W, this energy-efficient bulb is perfect for creating a bright and inviting atmosphere and all connected accessories, complete all as specified and directed.Make :- Crompton Cat Part No. CCP-128-36-57-SL-NWH or equivalent make as listed in Appendix \"G\" to Particular Specifications of the tender. Note :- Make & Model of light shall only be decided and approved by GE. No extra claims whatsoever shall be entertained on this account. |
| 150 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
