|
| 1 | Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, holder, tube light, bulk head, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good the disturbed surfaces of wall, floors etc complete all as specified and directed. |
| 2 | M&Lpoint wiring for one light point / fan point or bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLSH, Multistranded copper conductor cable as in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, mediun duty for one light, fan, bell pioint controlled by one switch includingsunken steel boxes of suitable size with 3mm thick plastic laminated backelite sheet including FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour) as continuous earth wire and connecting to earth dolly, and making good the disturbed surfaces of wall/floor to match to existing finishes etc complete all as specified and directed.Notes: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces. |
| 3 | Description all as per Sl item No 2 here in before but wiring with FRLSH, Multistranded copper conductor cables in PVC casing and caping, complete all as specified and directed. Note : Rates are deemed to be include for providing PVC accessories i.e Tee, elbow, socket etc. |
| 4 | M&L in replacement of Point wiring for one 2 way light point/ fan point/ bell point etc controlled by one switch with copper conductor cable FRLSH type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC conduit of appropriate sizenot less than 20mm dia, and with sunk cast ironfor mounting fittings like switch, sockets etc covered with 3.00mm thick plastic laminated sheet top cover complete all as specified and directed.Notes: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces. |
| 5 | M&Lpoint wiring for one socket outlet 5Amp 3/5 pinfor independent board etc controlled by one switch with copper conductor cable FRLSH type multistrand of size 1.5Sqmm (red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate sizenot less than 20mm dia, and with sunk cast ironfor mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed.Notes: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces. |
| 6 | Description all as per Sl item No 5 here in before but for one 3 pin 5 amps socket outlet independent board in PVC casing and caping complete all as specified and directed.Note: Rates are deemed to include for providing PVC accessories i.e Tee, elbow, socket etc. |
| 7 | Description all as per Sl item No 5 here in before but for one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 8 | Description all as per Sl item No 5 here in before but for one 3 pin 5 amps socket outlet on the sameboard in PVC casing and caping complete all as specified and directed.Note: Rates are deemed to include for providing PVC accessories i.e Tee, elbow, socket etc. |
| 9 | Description all as per Srl item No. 5 above but for one 15 Amp independant socket outlet pointusing 4.0 Sqmm FRLSH PVC insulated unsheathedmulti-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked)not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly, complete all as specified and directed. |
| 10 | Description all as per Sl item No 9 here in before but for 15 Amp socket outlet in in PVC casing and caping complete all as specified and directed.Note: Rates are deemed to include for providing PVC accessories i.e Tee, elbow, socket etc. |
| 11 | Description all as per Srl item No. 9 above but for metal plug top AC & Geyser pointusing 4.0 Sqmm FRLSH PVC insulated unsheathedmulti-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked)not less than 20mm dia, incl FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly, complete all as specified and directed. |
| 12 | M&Lswitch pianoflush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 13 | M&Ltwo way switchpiano, flush button, single pole two way 6 amps 240 Volt with polycarbonate body complete all as specified and directed. |
| 14 | M&LBell push switchpiano flush button single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 15 | S&Fmulti socket outlet for 2 in 1, 3 pin, 6A, flush type complete all as specified and directed. |
| 16 | S&Fsocket outlet 2 in 1, 3 pin, 6 and 16 Amps , flush type, single pole, oneway,230Volts complete all as specified and directed. |
| 17 | S&Fswitch piano, flush type, single pole, oneway, 16 Amps 230Volts complete all as specified and directed. |
| 18 | S&Fstepped type electronicfan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed. |
| 19 | M&Lmodular point wiring for one light/fan/bell point controlled by one switch complete with 1.5Sqmm multistranded FRLSHPVC insulated unsheathed, FRLSH, multistranded copper conductor cable 1100 volts grade in and including non metallic rigid PVC medium duty concealed conduit with wall thickness not less than 20 mm diaincluding conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLSH PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed. |
| 20 | Description all as per srl item No. 19.00 here-in-before but for 5 pin 5 Amps socket outlet on independent board controlled by one switch 5 Amps one way, complete all as specified and directed. |
| 21 | Description all as per srl item No. 19.00 here-in-before but for 5 pin 5 Amps socket outlet on same board controlled by one switch 5 Amps one way, complete all as specified and directed. |
| 22 | Description all as per srl item No.19.00 here-in-before but for 15 Amps socket outlets point using 4.00 Sqmm FRLSH PVC insulated multistranded copper conductor cable including 4.0 Sqmm FRLSHPVC insulated unsheathed multistranded copper conductor cable as earth wire complete all as specified and directed. |
| 23 | M&Lone Moduleswitch 1 way 10 Amps 240 volts complete all as specified and directed. |
| 24 | M&Lone Moduleswitch 1 way 16 Amps 240 volts complete all as specified and directed. |
| 25 | M&L Moduler bell push 6A, 240 volts 1 Module complete all as specified and directed. |
| 26 | M&LModular socket 6A, 240 volts 2/3 pin2 Module complete all as specified and directed. |
| 27 | M&LModular socket 6A/16A , 240 volts 2/3 pin2 Module complete all as specified and directed. |
| 28 | M&LModular Fan step regulator 120W , 240 volts2 Module complete all as specified and directed. |
| 29 | M&Lceiling rosesurface bakelite 2 to 3 terminals with polycarbonate body, complete all as specified and directed. |
| 30 | M&Llamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 31 | M&L LED bulb 12 watt 230 Volt complete all as specified and directed. |
| 32 | Supply & fixing in replacement of wall mounted 1x20 watt LED 6500Ktube light fittings (4 feet long),Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientwith all accessories and making connection using 2 core, 0.50Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed. |
| 33 | Supply and fixing in replacement of LED light fittings mirror type with high out put diffuser 2 feet .10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 34 | Supply and fixing in replacement ofLED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. |
| 35 | Supply and fixingin replacement of Bell, Ding Dong AC. 230 volts, single pole complete all as specified and directed. |
| 36 | Supply and fixing in replacement of sheet metal enclouserssingle pole and neutral 240 volt , 20 Amps with two pin and earth plug and socket plug top complete with single pole MCBs complete all as specified and directed. |
| 37 | Supply and fixing in replacementSheet metal enclousre for DBs single door single pole and neutral with 200 amps rated bus bar of 2- way, 240 volts complete all as specified and directed. |
| 38 | Supply and fixing in replacementSheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 4- way, 240 voltscomplete all as specified and directed. |
| 39 | Supply and fixing in replacementSheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts complete all as specified and directed. |
| 40 | Supply and fixing in replacement MCB single pole and neutral 40 Amps, 240 volts , B-series complete all as specified and directed. |
| 41 | Supply and fixing in replacement MCB single pole 6 to 32 Amps, 240 volts , B-series complete all as specified and directed. |
| 42 | M&LEarthing complete with galvanised steel earth plate electrode 600mmx600mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified and directed including dismantling old earthing.Note:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted by the contractor.2. Soil used should be free from stone, boulders, aggregate, gravels etc |
| 43 | S&F in replacementsub main wiring with 10.00 sqmm copper conductor cable multistrand, FRLSH PVC sheathed two run (as phase and neutral) and one run 10.0Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in existing surface /recessed steel/ PVC conduit complete all as specified and directed.Note : Three runs of cable 10Sqmm shall be treated as one unit. |
| 44 | S&F in replacementLED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 45 | S&F in replacement octane LED panel of 15 W 6500K round slim, compact, auminum die cast edge lit panel. Recessed mounted round fixture with opal diffuser and separate electronic driver andlow profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology. An ideal solution where ceiling voids are limited but high lumen outputcomplete all as specified and directed.Make :Havells Cat Part No LHEBADP7IZ1W015 orequivalent in Bajaj/Crompton Greaves/Phillips |
| 46 | S&F in replacement octane LED panel of 15 W 6500K square slim, compact, auminum die cast edge lit panel. Recessed mounted square fixture with opal diffuser and separate electronic driver andlow profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output complete all as specified and directed.Make :Havells Cat Part No LHEBAEP7IZ1W015 orequivalent in Bajaj/Crompton Greaves/Phillips |
| 47 | S&F in replacement ofcable size 10sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed. |
| 48 | S&F in replacement ofcable size 16sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed. |
| 49 | S&F in replacement VTPN Distribution board with provision for MCCB as incommer 100 A 04 pole IP 54, 04way(for incoming MCCB & outgoing MCBs), with copper busbar for each phase, withNeutral bar,Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 100 Amps MCCB, 25 KA, 4 pole, as incomer and SP MCB\"s of cap 6-32amps as outgoing complete all as specified and directed.Note: Rate of MCCBs and MCB,cutting,chasing,grouting in wallare included in above rate. |
| 50 | Servicingofceilingfansofcapacity1200/1400mmincludingtakingdown from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, canopy screwsof suitable size and ensuringallbladesscrewedproperlybeforerefixing includingreplacementof PVCfanboxroundsheet as required on siteandmakingelectricconnectionwith flexible copperconductorofsize3core0.50 Sqmmcompleteallasspecifiedand directed.Note:- Rewinding and unserviceable parts other than specified in this item if any will be measured seperately. |
| 51 | M&Ltaking down, opening, dismantling and taking out burnt winding wire by cutting, cleaningslots and re-winding of AC ceilingfanmotor1400/1200mmsweep anymake withsuperenameled colourcopperwindingwireofgauge35/36SWGincluding,sleevework, varnishingwith1stclassinsulationpaperwiththreadingcompleteallas specified and directed.Note:- Total weight of winding wire should not be less than 200gm Per fan Make ofwindingwire: RR/ BIC/Devidyal/ Swastik orequivalent make as per command approved list. |
| 52 | Servicing of Exhaust fans of size upto 750 mm sweep including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws of suitable size and ensuringfanbladesscrewedproperlybeforerefixingandmakingelectric connectionwith flexible copper conductor of size 3 core 0.50 Sqmm complete all as specified and directed.Note:- Rewinding and unserviceable parts other than specified in this item if any will be measured seperately. |
| 53 | M&Ltaking down, opening, dismantling and takingoutburntwindingwirebycutting,cleaning slotsandre-windingof exhaust fan/wall mounted fan motor upto 450mm sweep with super enameled copper winding wireofgaugeas per existing and approved from engr-in-charge before fittedincludingcuttingandgettingoutoldburntwinding, sleeve work, varnishing with E class insulation varnish, threading complete all as specified and directed. |
| 54 | Supply & fixing in replacement ofgun metal bush of ceiling fanofsize1200/1400mmsweepasperexistingsizecompleteallas specified and directed. |
| 55 | Supply & fixingin replacement ofcapacitor AC 440 volts 2.5 modified with copper wire terminal incl PVC clamp complete all as specified and directed. |
| 56 | Description all as per Srl item No 55 Above but capacitor of rating 3.15mfd complete all as specified and directed. |
| 57 | Supply & fixing in replacement ball bearing suitable for ceiling fan/exhaust fan/wall/pedestal fan any type complete all as specified and directed. |
| 58 | Supply & fixing inreplacementofoldunserviceableshackleassykit(rubber real -01, MS split clamp -02 Nos, nut, check nut, spring washer, bolt not less tha6.0mmdia&splitpin-02Nos)suitableforceilingfan1200/1400mm sweepcomplete all as specified and directed. |
| 59 | Supply & fixingin replacement ofceiling fan blades made of MS sheet duly powder coated of thickness not less than 1.0mm suitable for 1400/1200mm sweep ceiling fan complete all as specified and directed. |
| 60 | Supplyandfixingdownrod madeofMSpipemediumgrade15mmdiaof 300/600mm long duly drilled holesboth endsand slotwithhole inotherend suitable for fixing of ceiling fan of any sweep/type and painting to down rod with spray painted two coat of synthetic enamel paintover one coat of red oxide primer complete all as specified and directed. |
| 61 | SupplyandfixinginreplacementPVCcanopyforceilingfanofsuitablesize complete all as specified and directed. |
| 62 | S&F in replacement of Matallic casing (upper and lower) for housing ceiling fanmotorofsizerequiredatsiteforceilingfan1200mm/1400mmsweep madeoutofpowdercoatedCRCAsheetcompleteallasspecifiedand directed. |
| 63 | Supply and fixing in replacement cable PVC insulated and overall sheathed with flexible copper conductor 3 core of size 0.5sqmmcomplete all as specified and directed. |
| 64 | M&Lremoving old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of painting with existing colourto ceiling fan 1200-1400mm sweep at site with heat resistant synthetic enamel paint by spray paintingon the ceiling fans complete all as specified and directed. |
| 65 | M&Lremoving old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of painting with existing colourto Exhuast fan upto 750mm sweep alongwith connected part at site with heat resistant synthetic enamel paint by spray painting inclon the Exhuast fan complete all as specified and directed. |
| 66 | Supply and replacing existing unserviceable metallic shutter of exhaust fan as per existing size & shape complete all as specified and directed. |
| 67 | Supply and replacing existing unserviceable PVC fan bladeof exhaust fan as per existing size & shape complete all as specified and directed. |
| 68 | M&L lathe work of Ceiling Fan/ Exhaust fan of any capacity and make including re-alignment to rotor, stater sloter, cleaning welding , bracing and polishing etc and refixing after repair and testing complete all as specified and directed. |
| 69 | Replacement of old unserviceable outer PVCbody of exhuastfan alongwith shutter cover plateof size upto 300mm including all fitments such screws, gasket cover canopy of both side etc complete all as specified and directed. |
| 70 | S&Fin replacement of motor of exhaust fan upto 450mm sweep metallic body 230 volts 50Hz 900 RPM (ISI Marked) with copper winding complete all specified and directed. |
| 71 | S&F in replacementouter metallicbody of exhuastfan alongwith connected support arm and body frame of size upto 450 mm incl all fitments such screws, gasket cover canopy of both side etc complete all as specified and directed. |
| 72 | Supply and fixing in replacement of syphon assembly of 6 hole/09 holes as per site requirement made out of brass of 25 ltr capacity (ISI marked) including necessary studs screws and rubber gasket/washers complete all as specified and directed. |
| 73 | Supply and fixing in replacement ofthermostat switch (ISI marked) suitable for geyser25 ltr to 50 ltr, AC 230 volt adjustable range from 0-90 degree Celsius as per exisiting size, make and shape complete all as specified and directed. |
| 74 | Supply and fixing inreplacement of heating element titanium coated of rating 1.5/2 KW suitable for geyser any type and make as per existing and site requirement incl gasket washer (ISI marked)geyser element AC 230 volt complete all as specified and directed. |
| 75 | S&F in replacment of geyser connections pipes for hot & cold water supply made out of stainless steel wire braided connector with chrome finish heavy duty nuts of 15 mm dia size with suitable length and as per existing site condition complete all as specified and directed. |
| 76 | Supply and fixing in replacement cable flexible PVC insulated, PVC sheathed, copper conductor, 3 core 2.5 sqmm (ISI marked ) 1100 volts grade complete all as specified and directed. |
| 77 | S&F in replacement of 5 Amp plug top, 3 pin complete all as specified and directed. |
| 78 | S&F in replacement of 15 Amp plug top, 3 pin complete all as specified and directed. |
| 79 | S&F in replacement LED street light fitting of 35 watts, 5700k, IP 66 IK-07 rating power factor >0.95, IK-08 having 120 lm/watt efficacy with invidual lens cover oneach LED, rendering index > 70, 4 KV integrated surge protection, external 10 KV surge protection potted driver, tougned glass cover in high pressure die-cast powder coated aluminium housing and making connection using 3 core flexible copper cable complete all as specified and directed. |
| 80 | Description all as per srl item No.79 abovebut 60 watt complete all as specified and directed. |
| 81 | Description all as per srl item No.79 abovebut 70 wattcomplete all as specified and directed. |
| 82 | Description all as per srl item No.79 abovebut LED flood light 120 watt, 6000K complete all as specified and directed. |
| 83 | Notes :-An amount of Rs. 45599.00 on account of Credit Schedule for Schedule \"A\" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
