|
| 1 | Supplying and filling in plinth with local sand under floors, including watering, ramming, consolidating and dressing complete. |
| 2 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300m apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 ( 1 cement : 2 Coarse sand) to match the existing floor. |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landing , balconies, shelves, chajjas, lintels, bands, plain, window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost, of centering, shuttering, finishing and reinforcement, with 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone - III) : 3 Graded stone aggregate 20 mm nominal size). |
| 4 | Centering and shuttering including strutting, propping etc.and removal of form for all heights: |
| 5 | Steel reinforcements for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 6 | Stone work (machine cut edges etc. for wall lining veneer work )upto 10 m height backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1 cement: 3 coarse sand) including pointing in white cement mortar 1:2( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade:( To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately): |
| 7 | Providing and fixing 18mm thick gang saw cut, mirror prepolished, machine cut for kitchen platforms, vanity counters, window, sills, facias and similiar locations of required size, approved shade, color and texture laid over 20 mm thick base cement mortar 1:4 ( 1 Cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding, and polishing to edges to give high gloss finish etc. complete at all levels |
| 8 | Providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by the engineer- in charge |
| 9 | Extra for finish mable/ granite stone, over and above corresponding basic item, in facia and drops of width up to 150mm with epoxy resin based adhesive, including cleaning etc complete. |
| 10 | Extra for opening of required size and shape for wash basin/ kitchen/ sink in kitchen platform, vanity counter and similiar location in marble/ granite / stone work. Including necessary holes for pillar taps etc. including moulding rubbing and polishing of cut edges etc. complete. |
| 11 | Providing and fixing to existing door frames. 30 mm thick fiberglass reinforced plastic(F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of FRP laminate conforming to table-3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 12 | Providing and fixing ISI marked oxidised MS sliding door bolts with nuts and screws etc. complete. |
| 13 | Providing and fixing ISI marked oxidised MS tower bolt black finish, ( Barrel type) with necessary screws etc. complete: |
| 14 | Providing and fixing ISI marked oxidised MS handles conforming to IS:4992 with necessary screws etc. complete: |
| 15 | Providing and fixing T iron frames for doors, windows windows and ventilators of mild steel tee-section, joints mitered and welded, including fixing of necessary butt Hinges and screws and applying a priming coat of approved Steel primer |
| 16 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 course sand) and jointing with grey cement slurry @ 3.3 kg per square metre including pointing in white cement mixed with pigment of matching shade complete |
| 17 | Providing and laying matt finished vitrified tile of size 600x600x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 18 | Providing and fixing glass panes, with putty and glass clips wherever necessary fittings |
| 19 | Providing and fixing water closet squatting pan (Indian type WC pan) with 100 mm sand cast iron P&S trap, 10 l low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) confirming to IS: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 20 | Providing and fixing white vitreous China pedestal type water closet (European type) with seat and lid, 10 l low level white vitreous China flushing cistern and CP flush bend with fittings and CI brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. |
| 21 | Providing and fixing white vitreous China flat back half stall urinal of size 580 X 380 X 350 mm with white PVC automatic flushing cistern with fittings, standard size, CP brass flush pipe, spreaders with union and clamps (all in CP brass) with waste fitting as per IS: 2556, CI trap without late grating and other coupling in CP brass, including painting of fittings and cutting and making good the walls and floors wherever required |
| 22 | Providing and fixing wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 23 | Providing and fixing 600 X 450 mm beveled edge mirror (of superior glass of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. |
| 24 | Providing in fixing trap of self cleaning system design with screwed down or hinged grating with or without vent arm complete ,including cost of cutting and making good the walls and floors. |
| 25 | Providing and fixing MS holder bat clamps of approve design to Sand cast iron/ cast iron (spun) pipe embedded in an including cement concrete blocks 10x 10x 10 cm of 1 : 2 :4 (1 cement : 2coarse sand: 4 graded stone aggregate 20 mm nominal size including cost of cutting holes and making good the walls etc. |
| 26 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall |
| 27 | Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) |
| 28 | Providing and fixing Ball valve (brass) of approved quality high or low pressure with plastic floats complete |
| 29 | Providing and fixing unplasticized PVC connection 5 with brass unions |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS :127001 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the brass support for tank. |
| 31 | Providing and fixing CP brass long body bib cock of approved quality confirming to IS standards and Weighing not less than 690 grams |
| 32 | Providing playing and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the preposition of 1 : 1 (1 cement: 1 fine sand) including testing of joints etc complete |
| 33 | Providing and laying cement concrete 1:5:10(1 cement: 5 coarse sand :10 graded stone aggregate 40 mm nominal size) all round SW pipes including bed concrete as per standard design. |
| 34 | Providing and fixing square mouth S W Gully trap class SP 1 complete with CI grating brick masonary chamber with water tight CI cover with frame of 300 X 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.7 kg as per standard design. |
| 35 | Constructing brick masonary manhole in cement mortar 1 : 4 (1 cement : course sand 4) with RCC top slab with 1: 2:4 Mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominalsize) foundation concrete 1 : 4 : 8 Mix (1 cement: 4 coarse sand : 8 grade stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1 : 2: 4 (1 cement : course sand :4 graded stone aggregate 20 mm nominal size) finished with floating coat of neat cement complete as per standard design. |
| 36 | Provision for supply and installation of prefabricated toilet container of size 20 ft × 8 ft at the specified location, including placement, leveling, fixing, and all incidental works, complete as directed by the Engineer-in-Charge |
| 37 | “Provision for supply and installation of 50 mm thick high partition wall for separating toilet chambers, including all material, labor charges, loading, unloading, handling, fixing, finishing, and all incidental works complete as directed |
| 38 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 square mm FRLS PVC insulated copper conductor single core cable in surface /recessed Steel conduit with piano type switch phenolic laminated sheet suitable size MS box and earthing the point with 1.5 square mm frls PVC insulated copper conductor single core cable etc |
| 39 | Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with one number 4 square mm frls PVC insulated copper conductor single core cable for loop earthing as required |
| 40 | Wiring for circuit /sub main wiring along with earth wire with following sizes of FRLS PVC insulated copper conductor single core cable in surface recessed conduit as required |
| 41 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit as required |
| 42 | Wiring for light/ power plug with 2x 4 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with one number four square mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 43 | Supply and fixing metal box of 180 MMX 100 MMX 60 MM deep normal size on surface or in recess with suitable size of phenolic laminated sheet cover in front of including providing and fixing 6 pin 5/6 ampere and 15 / 16 ampere socket outlet and 15 / 16 ampere connection painting etc as required |
| 44 | Supplying and fixing 5 ampere to 32 ampere rating 240 / 415 volt 10 kilo ampere C curve miniature circuit breaker suitable for inducting loads of following poles in the existing MCB DB complete with connections, testing and commissioning extra as required |
| 45 | Supplying and fixing following way single pole and neutral sheet Steel MCB distribution board 240 volt on surface /recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnection,powder painted including earthing etc as required (butwithout MCB/ rccb/ isolator) |
| 46 | Earthing with GI Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 m long etc (but without charcoal coke and salt etc |
| 47 | S/f bulk head light fixture for external lighting Philips or equivalent, LED light of Philips 18 watt or above, P/F exhaust fan 450 mm sweep of ISI make, Making opening for exhaust fan including cutting finishing and providing and fixing MS grill complete as per direction of engineering charge etc.all complete as directed. |
| 48 | Provision of supplying and laying well graded stone aggregates of size ranging from 90 mm to 45 mm, including spreading , hand picking, ramming, and consolidation to the required gradient and camber as directed by engineer incharge. The rate shall be inclusive of cost of all material, labours, tools and plants, transportation, loading unloading, watering, and all incidental charges necessary for the proper completion of the work as per specifications and direction of engineer-in-charge. |
| 49 | Surface dressing of the ground including removing vegetation and inqualities not exceeding 15 CM Deep and disposal of rubbish lead up to 50 m and left up to 1.5 m |
| 50 | Providing and laying at or near ground level factory made kerb stone of m25 grade cement concrete in position to the required line level and curvature jointed with cement mortar 1: 3 (1 cement :3 coarse sand) including making joints with or without grooves thickness of joints except at sharp shall not to more than 5 mm including making drainage opening wherever required complete etc as per direction of engineer in charge length of finished curve edging shall be measured to calculate volume for payment precast CC kerb stone shall be approved by engineer incharge |
| 51 | Provision for plumbing installation, including supply, installation charges, transportation and other incidentals |
| 52 | Provision of supplying and laying moorum of high quality, including spreading , hand picking, ramming, and consolidation to the required gradient and camber(1 in 50) as directed by engineer incharge. The rate shall be inclusive of cost of all material, labours, tools and plants, transportation, loading unloading, watering, and all incidental charges necessary for the proper completion of the work as per specifications and direction of engineer-in-charge. |
| 53 | Provision for supplying and fixing (S/F) directional and name boards at site, made from dressed sandstone blocks of 5-inch thickness, with lettering engraved to a depth of ½ inch. The work includes fine finishing, polishing, and painting of engraved letters with approved enamel paint and fixing in CC 1:3:6, complete in all respects as directed by the Engineer-in-Charge. |
| 54 | Constructing two-chamber cast-in-situ RCC septic tank of capacity 3.0 m³ (minimum) per unit (or as per hydraulic design), comprising internal division wall, inlet/outlet channels, ventilation pipe, access manhole(s) with R.C.C. cover slab, internal plastering with cement slurry, providing necessary reinforcement (Fe500), M20 grade concrete for tank walls and top slab, brickwork/stoneworks for chambers where applicable, connections to inlet sewer/gully, construction of inspection / desludging manhole and provision of ventilation stack, testing for water-tightness, curing and handing over complete as per direction of engineer in-charge |
