Name of Work: Supply and application of epoxy floor system of 1 mm and 3 mm thickness at various locations at ICAT centre-1 & 2, Manesar (Haryana)”
Sl. No.
Item Description
1
Supply Of primer: Providing two components (may vary as per manufacturers specifications), low viscous epoxy primer having a volumetric ratio of mixing (Resin and Hardner) in required ratio as per manufacturers specifications to provide a DFT of around 200 microns. Make: Jamkon/Sika/Pidilite or equivalent.
2
Supply Of EPI self-levelling Screed: Providing self-levelling screed having a volumetric ratio of mixing (Resin and Hardener) 2:1 or as per manufacturers specifications and applied by trowel to the desired thickness of 1800 microns.Make: Conpro/Jamkon/Sika/Pidilite or equivalent. (Polymer to aggregate ratio not exceeding 1:3) Silica sand, aggregate are not included in this item and will be paid separately in item no 3 for Filler
3
Filler: Silica sand of approved quality well graded as per latest standards
4
EPI SELF LEVELLING TOPCOAT: Providing EPI based self-leveling topcoat to yield a thickness of 1000 microns. The material for topcoat shall be supplied in pre-weighted packs (Resin, Hardener, formulated aggregate and EPI pigment and all) and ready to mix and use, Make: Jamkon/Sika/Pidilite or equivalent. Calculated 1.71 kg for 1 sqm, It may vary as per manufacturer specifications).
5
Pigment
6
Application of Epoxy 1 mm Flooring system: Labour charges for application of 1 mm topcoat of epoxy work including cutting, grinding, grove cutting, treating floor joints, cleaning, grove filling, repair of concrete base. Work should be done with utmost care by using grinding machinery with vacuum attachment and covering area to restrict dust spread.The entire work/ application shall be done through qualified applicators of manufacturers only
7
Application of 3 mm Epoxy Flooring system: Labour charges for application of 2 mm screed + 1 mm topcoat of epoxy work including cutting, grinding, grove cutting, treating floor joints, cleaning, grove filling, repair of concrete base. Work should be done with utmost care by using grinding machinery with vacuum attachment and covering area to restrict dust spread.The entire work/ application shall be done through qualified applicators of manufacturers only
8
Transportation charges (inclusive of packing, forwarding, transportation and unloading of material at ICAT Project site)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
