|
| 1 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 2 | 250x16 mm |
| 3 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 4 | 125 mm |
| 5 | 12 mm cement plaster of mix : |
| 6 | 1:4 (1 cement: 4 fine sand) |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. |
| 8 | Two or more coats on new work |
| 9 | Finishing walls with water proofing cement paint of required shade : |
| 10 | New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 12 | Two or more coats on new work |
| 13 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 14 | Flat back wash basin of size 550x400 mm |
| 15 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall |
| 17 | 15 mm dia nominal bore |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work |
| 19 | 20 mm dia nominal bore |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 21 | 25 mm nominal bore |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 24 | 200x10 mm |
| 25 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 26 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 27 | Semi rigid pipe |
| 28 | 40 mm dia |
| 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 30 | Providing and fixing brass bib cock of approved quality : |
| 31 | 15 mm nominal bore |
| 32 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 33 | Orissa pattern W.C. pan of size 580x440 mm |
| 34 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 35 | Superious Hard wood Cat-II(A) |
| 36 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:Butt hingesand necessary screwsshall be paid separately) |
| 37 | Superious Hard wood Cat-II(A) |
| 38 | 35 mm thick shutters |
| 39 | Providing and fixing soil, waste and vent pipes : |
| 40 | 100 mm dia |
| 41 | UPVC PIPE as per IS: 1729 |
| 42 | Providing and fixing 100 mm size PVC gully or nahani trap in floor, weight not less than 100 gms. |
