|
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil etc complete all as specified and directed. |
| 2 | Returning, filing in, including spreading, levelling, watering and well rammingin layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed |
| 3 | Removal of excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 5 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as inlintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form workcomplete all as specified and directed. |
| 7 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as inlintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form workcomplete all as specified and directed. |
| 8 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. |
| 9 | M&L forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 10 | M&L for forming fair finished drain or channel, 50 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and directed. |
| 11 | M&L for brick work (except brick), straightor curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.Note : Serviceable old bricks obtained from dismantling shall be re-used under this item. |
| 12 | M&L brick work using old size sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 13 | S&F in repair Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of posts, straining bolts, standard bolt, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins, etc complete all as specified and directed. Note : Each line of wire to be measured for the purpose of payment. |
| 14 | S&F MS work in fencing post ,flat iron as inwind ties or similar work conforming to Fe -290 Gde E-165 including cutting, drilling ,bolting or riveting etccomplete all as specified and directed. |
| 15 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long and5 to 10 mm dia of shank complete all as specified and directed. |
| 16 | M&L for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | M&L for mild steel Fe-410-W Gde E-250 or Fe-290 Gde E-165 round bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | S&F rolled mild steel section in framed work as in doors or gates of angle or other section withgusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed. |
| 19 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provision of binding wire complete all as specified and directed |
| 20 | M&L for running welding in repair, thickness of metal to be welded exc 20 mm but not exceeding 25 mm complete all as specified and directed. |
| 21 | Supply only chain link MS galvanisd fencing, any size or typecomplete all as specified and directed. |
| 22 | M&L (execpt interlocking paver block) for interlocking paver block, any shape and size of 60 mm thickness, by vibratory compaction, cutting paver blocks in required size and pattern, filling joints with and including sand cushing 25 mm thick and sweep out surplus sand complete all as specified and directed.Note : Old paver block obtained from dismantle shall be used. |
| 23 | M&L for 75 mm thick Cement concrete 1:3:6type C-2using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 24 | M&L for non skid ceramic coloured tiles of design as approved7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. |
| 25 | M&L for chequered cement concrete tiles 25 cm x 25 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing)and removing rubbish off the premises complete all as specified and directed. |
| 27 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever requiredcomplete all as specified and directed. |
| 28 | M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 29 | M&L for rendering on fair faces of brick workor concrete surfaceof wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 30 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 31 | M&L for preparation of old decorated surfaces of slopping Manglore roof, grid patternand applying onecoat of acrylic emulsion exterior graded weather proof paint comouflaging pattern includingscffolding upto two stroey building complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc. |
| 32 | M&L for preparation of new plastered surfaces of wall and applying two cement based paint complete all as specified and directed. |
| 33 | M & L for one coat of cement based paint on old plastered surface of wall including preparation of surfaces upto two/three stroey building including scaffolding arrangement complete all as specified and directed. |
| 34 | M&L for preparation of newly plastered surfaces of walls and applying two coats ofexterior acrylic emulsion paint over a coat of primer including scaffolding upto three storey building complete all as specified and as directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc. |
| 35 | M&L for preparationof old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | M&L for preparationof new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 37 | Cleaningof sewage line150 mm dia SGWG /RCC NP 2 pipe or anyother specification including removing all type of blockage from manholes to manholes by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc including deposing off all sludge waste ,debries etc to outside MD land complete all as specified and directed. Note : Contractor has to depute extra labourfor cleaning of sewage linesto clear the blockage in sewer lines as and when required. |
| 38 | Cleaningof sewage line200 mm dia SGWG /RCC NP 2 pipe or anyother specification including removing all type of blockage from manholes to manholes by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc including deposing off all sludge waste ,debries etc to outside MD land complete all as specified and directed. (Contractor has to depute extra labourfor cleaning of sewage linesto clear the blockage in sewer lines as and when required.) |
| 39 | Cleaning and maint of sewage system including removing all type of blockage from wash hand basins ,bottle trap, kitchen sink, water closet, Nahani trap , Floor trap, Gully trap, urinal pots, sewage lines of any dia, manholes,by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc and manpower as required complete all as specified and directed. Note:- (i) Contractor has to provide minimum two Nos safaiwalas / Sweepers daily to attend the sewage complaint which is received day to day by sub division.(ii) Any complaint which is not completed within two days from the date of issue of complaint, compensation shall be charged @Rs. 200/- per day for each complaint.(iii) No of blockage/ complaints cleared per day shall be recorded in MB is to be paid to the contractor as each Job. (iv) Cleaning of septic tank, manhole, sewage line and soakage well are paid separately under relevant item. |
| 40 | Hiring vehicle mounted sewer suction cum jetting machine of capacity 3000 to 12000 litre with recycling facility for cleaning / descaling / maintenance of sewer line and Manhole for underground drainage system complete all as specified and directed by engineer in-charge. |
| 41 | S&F in repair Round / Square Grating doom of size 100 / 125 / 140 mm of Stainless Steel (minimum weight 150 gram), with or without waste hole, fixed on floor / nahani trap complete all as specified and directed. |
| 42 | M&L for cleaning / deselting of dry drain by means of excavation/removing mud,grass etc and sweeping the side and bottom of drain including removing and refixing of drain cover including removing excavated material outside of MoD land in low laying area complete all as specified and directed |
| 43 | M&L in repair for cast iron fittings up to 150 mm bore for spigot socketed pipes such as bends (any type ,radius and angle) tapers any type(straight, bends, increasing, decreasing or double socket etc) Tee pieces, single branch, \"Y\" junction, double branch, cross (all sockets or socket and spigot) collars, caps or plugs complete all as specified and directed. |
| 44 | S&F cast iron soil, waste and vent 100 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 45 | S&F cast iron soil, waste and vent 75 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. |
| 46 | S&F cast iron soil, waste and vent 100 mm bore of pipes (sand cast in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed. |
| 47 | S&F in repair cast iron cowls for 75 mm bore of pipe complete all as specified and directed. |
| 48 | S&F in repair cast iron cowls for 100 mm bore of pipe complete all as specified and directed. |
| 49 | M&L for scooping and taking out sludge,water and foreign material from septic tank / soak well of any description and any depth including removing and re-fixing of septic tank and soak well cover etc and provide appliances required for safe disposal of sludge and foreign material by carrying out the same in covered van/trolley out of defence landcomplete all as specified and directed. Note :- Net volume of internal size of each septic tank / soak well up to the depth of water from bottom shall be measured for payment purpose including de-watering and removing dry / wet sludge etc complete all as specified and directed. |
| 50 | M&L for Double Wall Corrugated (DWC) pipe of class SN-4, IS-16098 (part-II) of 150mm bore (internal), laid to slope in trenches, jointed complete with coupler, bends, Tee, reducers etc and tested complete all as specified and directed.Make : Ultra plus of Supreme / Corfit of Prince / D-Rex of Astral or equivalent as approved by GE. |
| 51 | M&L for Double Wall Corrugated (DWC) pipe of class SN-4, IS-16098 (part-II) of 200mm bore (internal), laid to slope in trenches, jointed complete with coupler, bends, Tee, reducers etc and tested complete all as specified and directed.Make : Ultra plus of Supreme / Corfit of Prince / D-Rex of Astral or equivalent as approved by GE. |
| 52 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed. |
| 53 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 54 | S&F PVC (SWR) bends any radius of 75 mm borewithoutaccess door complete all as specified and directed. |
| 55 | S&F PVC (SWR) bends any radius of 110 mm borewithoutaccess door complete all as specified and directed. |
| 56 | M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed |
| 57 | S&F in repair CI Bends (any radius), diminishing pieces or tapers (larger bore measured)for 100 mm bore of pipe complete all as specified and directed. |
| 58 | S&F in repair CI Bends (any radius), diminishing pieces or tapers (larger bore measured)for 75 mm bore of pipe complete all as specified and directed. |
| 59 | M&L for cement concrete bed to drain pipes including packing under and haunching againstthe sides of pipe after they are laid & tested for 150 mm bore of pipe withcement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 60 | M&L for cement concrete bed to drain pipes including packing under and haunching againstthe sides of pipe after they are laid & tested for 200 mm bore of pipe withcement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 61 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and directed. |
| 62 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200/225 mm dia of pipe complete all as specified and directed. |
| 63 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 100 mm internal dia of pipe complete all as specified and directed. |
| 64 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 75mm internal dia of pipe complete all as specified and directed. |
| 65 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 66 | Dismantling of stone slabs of any description or thickness, laid dry or laid dry and pointed in floor, apron etc complete all as specified and directed. |
| 67 | Demolition of cement concrete un-reinforced in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 68 | Demolition of reinforced cement concrete (RCC) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed. |
| 69 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 70 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 71 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 150 mm internal dia of pipe complete all as specified and directed. |
| 72 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 200 mm internal dia of pipe complete all as specified and directed. |
