|
| 1 | Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loosesoil complete all as specified. |
| 2 | M&L PCC 1 : 4 : 8 type D2 using 40mm graded stone aggregates as in foundation of manholes, posts etc completeall as specified. |
| 3 | Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified. |
| 4 | Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed. |
| 5 | M&L cement concrete 1:3:6type C 2 (20mm graded stone aggregate)as in sub base, hard standing of75mm thick, complete all as specified. |
| 6 | M&L for brick work with sub class \"B\" brick straight or curved on plan exc6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 7 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 finished even and smooth without using extra cementincluding applying two coats of Apex Ultima Protek or equivalent exterior paint over two coat of base coat of apex ultima Protek or equivalenton walls as per manufacturers instructionscomplete all as specified and directed. |
| 8 | M & L for 15 mm thick internalrendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying two coats of distemper and primeron newly plastered wall surface |
| 9 | M & L for 10 mm thick rendering cement plaster in cement mortar 1:4 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement and applying three coats of white lime wash on newly plastered ceiling surfaces on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 10 | S & F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm ( size 600 mm x 600 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:4 complete |
| 11 | All as per item no. 13 except on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:3, set and jointed in white cement with pigment to match all as specified and directed. |
| 12 | S&F Aluminium window as per TD drg No. CEDZ/TD-316 with outer frame 40mmx114mm with 1.3mm thickness corner 45 degree cut & aluminium welded center mullion size 40mmx65mm also welded shutter (02) size 40mmx 60mmx 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp, 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm SS 202 grade round bar, 5mm clear glass both side EPDMrubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter 40x18mm 45 degree cut & welded mosquito net shutter (02) with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet, full system powder coating with pure polyster coat of any shade as approved by GE and installing with silicone complete all as specified and directed. |
| 13 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm 2 , modulus of elasticity 850 N/mm 2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 15 | S&F Stainless steel butt hinges medium weight 100 mm size fixed with SS screws. |
| 16 | S&F Stainless steelbarrel tower bolt extruded section 150 mm long and fixed with SS screws. |
| 17 | S&F 150 mm Stainless steel handlefixed with SS screws. |
| 18 | S&F 300 mm Stainless steelsliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut. |
| 19 | M & L Cement concrete type B-2 1:3:6 (40 mm graded stone aggregate) as in plinth protection, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&Lreinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like including bonding agent , complete all as specified |
| 21 | M&L form work to roof slab, chajja, weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat, etc. complete all as specified and directed. |
| 22 | M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified. |
| 23 | Supply and fix TMT bars, 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 24 | Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge |
| 25 | M&L Hardcore ofbroken stone of gauge n. exc 63mm deposited, spread and levelled in layers not exc 100 mm thick watered and rammed to a true surface complete all as specified and directed. |
| 26 | M&L 75mm thick PCC (1:4:8) Type D2 (using 40mm graded crushed stoneaggregate) as in sub floor complete all as specified and directed |
| 27 | Sand filling under floors or in foundations including watering and consolidations complete all as specified and directed. |
| 28 | M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 29 | M & L Providing, Type B1 (1:2:4) 20 mm graded aggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edgesin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates nominal mix as in sd, kerbs not provided for in Item04028, water troughs and the like including eathering, slightly rounded or chamfered angles and throating, as directed |
| 30 | M&L preparation of newly plastered surfaces of work and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed. |
| 31 | M&L for mild steel works as in angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including al necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 32 | S & F of Fe 410-W Gde -E- 250 quality (A) Mild steel in flat, round or squarebars, in available lengths complete all as directed. |
| 33 | S&F Mild steel screw sbolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed ene to be fitted with washers and one hexagonal or square nut, exc 5cm long but n.exc 10cm long and dia of neck 11mm to 15mm complete all as specified and directed. |
| 34 | M&L for preparing new or previously untreated steel/iron surfaces of any description not otherwise described n.exc. 10 cm in width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed. |
| 35 | Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint |
| 36 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 37 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 38 | Supply only Chain link MS galvanisd fencing, anysize or type |
| 39 | Excavating in post holes (or similar holes) each not exceeding 0.50 cu m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified. |
| 40 | M&L mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including necessary welding etc complete all as specified and directed. |
| 41 | M&L mild steel plates (plain or chequered) channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachement complete all as specified. |
| 42 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 43 | Cutting channels, grooves or rebates n exc 15 cm girth, and trimming surface with reiforcement |
| 44 | S&F Roof trusses (framed), truss, framedbrackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge |
| 45 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 46 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. |
| 47 | S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all asspecified. |
| 48 | S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed. |
| 49 | S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs. |
| 50 | “S&F Modular Cabinet Kitchen accessoriesof Stainless Steelgrade-304,6mm size rod thicknessincluding :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket,(iv) Cup & saucer basket, (v) Glass basket,(vi) Plate basket, (vii) Premium magic corner(viii) Oil Pull out Tray ( Triple basket layer) of size as per site requirement all spd and directed by Engr in charge. |
| 51 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified. |
| 52 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurrylaid over 15mm thick screed bed in cm 1:6 asin floors withno pigment complete all as specified and directed. |
| 53 | Taking up or down 15 mm dia GI tubing and connections complete all as specified. |
| 54 | S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed. |
| 55 | S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mmsection window grill as per approved sample and as per IS specificationsjoining cleat for fixing etc. complete all as specified. |
| 56 | M&L anodised aluminium window/door and ventilator shutters, sliding or side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) including 4mm thick glass panes or stainless steel wire mesh complete all as specified and directed. Note : The rate quoted by the contractor is inclusive of all fixture/fittings/glass/wire mesh/aluminium jallies etc. |
| 57 | M&L for 15 mm thickin CM 1:4 on new surfaces of concrete or brick surfaces of walls or chajjas or pillars finished even and smooth without using extra cement including scaffolding and necessary formwork if required complete all as specified and directed. |
| 58 | M&L for preparation of newly plastered surface applyingtwo coats of oil bound distemper with roller brush (white or tinted) on plastered wall surfaces complete all as specified. |
| 59 | M& L for non skid coloured rectified ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed for laying floor in CM 1:6 including dismantling the existing tiles with screed and removal of debries out of MOD Landcomplete all as specified and directedby Engineer in Charge, approved by GE. |
| 60 | M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces on skirting /dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4, including dismantling the existing tiles with screed and removal of debries out of MOD Land complete all as specified and directedby Engr-in-Charge, approved by GE. |
| 61 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified. |
| 62 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. |
| 63 | S&F in repair CP grating 125mm dia, complete all as specified. |
| 64 | S&F in repair aluminium peg set of 6 peg, 45 centimeter long, complete all as specified. |
| 65 | S&F in repair chromium plated quarter turn brass 2 way bib cock (two in one)suitable for 15mm bore pipe complete all as specified and directed. |
| 66 | S&F in repair15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. |
| 67 | S&F in repair fancy type 600mmx450mm bevelled edge mirror of selected quality glass mounted on 4mm thickand rectangular shape and fixed to wooden plugs with chromium plated brass screw and cupwashers, all as specified. |
| 68 | S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified |
| 69 | S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP brackrt gaurd and railling 60 cm long complete all as specified. |
| 70 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified. |
| 71 | S & F Brass CP health faucet hand shower type with 8mm dia 1.2 Meter long Flexible Tube and Wall Hookscrewed for iron pipe fancy type long body all as specified and directed. |
| 72 | M&L false ceiling using plain galvanized steel ceiling system consisting 600x600mm lay in tiles of pre coated galvanized steel sheets in 0.5 mm thick in white or coloured to be laid of grid system with 15mm wide T section flanged having rotary stitching on the main runner and 1200 mm corss tees. the main runner and 1200mm cross tees. The main runner spaced 1200mm centre flush fitting 1200mm long cross tees to be interlocked between runner at 1600mm centre to form 1200x600mm module. Permeter trim to be wall angle of size 3000x19x19mm secured to wall @ 450mm centre to centre and incldg. suspension system as per manufacturer instructions complete all as specified and directed by Engr-in-Charge and direced. |
| 73 | S&Fin repairsvitreous China coloured European type WC with \"P\" or \"S\" trap for 100 mm bore , including connection to rain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete complete all as specified . |
| 74 | S&F in repairs vitreous chinaware coloured wash hand basin with pedestalofsize 580mm x 450mm complete including, CP Waste couppling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Eng in charge. |
| 75 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets forbottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified. |
| 76 | M&L for applying two or more coats of 100 percent premium acrylic emulsion paint having VOc less than 50gm/litre & UV resistance as per IS 15489:2004, alali resistance, dirt reistance incl priming coat of exterior primer from manufacturercomplete all as specified and directed by Engineer-in-Charge.Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 77 | M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes of cement plaster 1:6 complete all as specified and directed. |
| 78 | S & F for coloured Non - skid Ceramic tiles 6 to 7 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm(size 400 mm x 400 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed. |
| 79 | M&L of 9 to 10 mm thick Endura super grip series 2 coloured tiles, in floor etc set and jointed in neat cement slurry and pointed in white and coloured cement to match all as specified and directed by Engr-in-Charge. |
| 80 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Eng-in-charge. |
| 81 | S&F DWCPE (SN8) 150 mm dia (internal dia) pipes , snap fit coupler and rubber ring incl testing and laid and properly laid In trenches to a level on concrete bed complete all as specified. |
| 82 | M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying exterior grade putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge. |
| 83 | Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. |
| 84 | M&L for coloured ceramic tilesof size 600x600x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 85 | M&L for 18-20mmthick coloured granitestone work Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite. |
| 86 | M&Lreinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent, complete all as specified |
| 87 | Taking down Chowkats or framesnot exceeding 1.5 Sqm each(without taking off shutters from the frames) all as specified and directed. |
| 88 | S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 89 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 90 | S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 91 | S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed. |
| 92 | S&F in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 93 | S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 94 | S&F 100mm size butt hinges, medium weight cold rolled complete all as specified. |
| 95 | S&F4.00 mmthick figured glass, pin head type andglazing with wooden beads, glass putty, PVC beading, aluminium beads, complete all as specified |
| 96 | S&F Stainless steel drapery curtain rods gold or antique silver 25 mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod complete all as required and directed. |
| 97 | M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified. |
| 98 | S&F in repair vitreous china squatting pan of orissa pattern long pan size580 x 440 mm white with \"p\"or \"S\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. |
| 99 | S&F in repair of 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified. |
| 100 | S&F in repair of 110 mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified. |
| 101 | S&F for steel windows fabricatedfrom roll formed sections made of galvanized steel colour coated powder coated (Base steel as per Sqm IS-513 D quality galvanized as IS 277 with zinc coating of 120 GSM with total coated thickness of 0.60mm. The coated section shall be with primer coated of primer of -7 microns thick, finish painted with a polyster paint of 12.16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure plyster powder upto 50-60microns thick with the following specifications (a) Main frame 72mm x 55mmx0.58mm (b) Mullion 72mmx50mm x0.58mm(c) Glazed/guazed shutter frame 47mmx20.20mmx0.58mm (d) Glass beads size 12mmx12mmx0.58mm Accessories. Each shutter shall be provided the following fittins (a) Stainless steel pipe of hinges 01 set (b) Alumminium powder coated handle-04 Nos. Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass. WIRE MESH -Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate. Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw. Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive of all aspects as specified in Drg No- CEDZ/TD/289 sheet 1 R/2 and 2R/2. |
| 102 | Taking up or down 20 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified. |
| 103 | S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified. |
| 104 | S&F bib tap, cast copper alloy chromium plated, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore diacomplete all as specified and directed. |
| 105 | S&F sinks made of stainless steel 1mm thick kitchenwith plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 106 | Demolition of brick work built in cement mortar in any description and position,complete all as specified. |
| 107 | M&L for brick work with sub class \"B\" brick straight or curved on plan exc6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 108 | M&L rendering 10 mm thick in CM 1:6 on internal brick/concrete wall surfaces of any description, and finishing the surfaces even and fair without using extra cement complete all as specified and directed . |
