|
| 1 | Demolition of cement concreteand paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of Stone slabs and tiles of anydescription or thickness infloors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 3 | Dismantling of Plain or corrugated steel sheeing any gauge thickness includig Nainital or similar patter roof covering etc complete all as specified and as directed |
| 4 | Demolition of brick work /stone masonry/PCC block masonry built in cementmortar of any description all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 6 | Surface excavation n exc 30 cm deep and average 15 cm in soft/loose soil and getting out in Soft / Loosesoil etc complete all as specified and as directed |
| 7 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed |
| 8 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed |
| 9 | Removing excavated materialexc. 250 m but n exc. 500 m anddepositing where directed et complete all as specified and as directed |
| 10 | Material and labour for Sand filling under floors or in foundations including watering and consolidationall as specified and directed |
| 11 | Material and labour for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed |
| 12 | Material and labour for plain cement concrete 1:4:8 type D-2, ( using 40 mm graded stone aggregates) as in foundations and mass concrete etc complete all as specified and as directed |
| 13 | Material and labour for cement concrete 1:3:6 type C-2 (using 20mm graded aggregate) as in hold fast and fillingof pressed steel chowkatetc complete all as specified and as directed |
| 14 | Material and labour for providing reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in Foundation, including rafts, footings, plinth beam etc complete all as specified and as directed |
| 15 | Material and labour for Reinforced cement concrete M-25 (desing mix) with using 20 mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all asspecified and as directed |
| 16 | Material and labour for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in Chajja etc complete all as specified and as directed |
| 17 | Material and labour for providing reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed |
| 18 | Material and labour for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in col, pillars, piers, posts and struts etc complete all as specified and as directed |
| 19 | Material and labour for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in stiar case incl landing etc complete all as specified and as directed |
| 20 | Material and labour for cement concrete 1:2:4 type, B1 (using 20 mm graded stone aggregates) as in copings, erb etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 21 | Material and labour for rubber Moulded Pre-cast Kerb stones of cement concrete Type B-1 1:2:4 (with using 20mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectly leveled surface pointed and jointed in CM 1:4including fixing etc complete all as specified and a as directed |
| 22 | Material and labour for cement concrete 1:2:4 type, B1 (using 20 mm graded stone aggregates )as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 23 | Supply only Liquid water proofing compound |
| 24 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight orcurved on plan exc 6mmeanradius built in cement mortar 1:6 etc complete all as specified and as directed |
| 25 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straightor curved on plan to anyradius inhalf brick thickwalls built in Cm 1:4 etc complete all as specified and as directed |
| 26 | Material and labour for Damp proof course 40 mm thick in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m etc complete all as specified and as directed. |
| 27 | Material and labour for green Marble work ( 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete ncl grinding the edges half round incl polishingall as specified and as directed. |
| 28 | Material and labour for 18 to 20 mm thick Granite (of any type) work(table rubbed and polishedin steps, jambs, pillars, window-cills, cooking plat forms and like in cementmortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite incl grinding the edges half round incl polishing etc complete all as specified and as directed. |
| 29 | Material and labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or toetc complete all as specified and as directed |
| 30 | Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with Rough finished surfaces of concrete (Flat) etc including edges of roof slab etccomplete all as specified and as directed |
| 31 | Material and labour forFormwork to chullah hoods, chajjas, troughs and similar items including edge, rough finished surfaces of concrete etc complete all as specified and as directed |
| 32 | Material and labour for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed |
| 33 | Material and labour for formwork to staircase with sloping or stepped soffits, including risers and stringers, landing, with rough finished surfaces of concrete etc complete all as specified and as directed |
| 34 | M for formwork to sides of pillars, posts, struts, piers, columns and stanchions, for square, rectangular or polygonal, rough finished surfaces of concrete etc complete all as specified and as directed |
| 35 | Supply and fix 2nd class hard wood 35 mm thick Glazed andskeletonshutters, openrebated and preparedto receive glass,gauze, etc. (withoutsash bars),edges offraming plain,chamfered orrounded. fitted withcut and mitred beadsfor securing glass, etc.; sizes of me-mbers of shutters asspecified inSSR PartI, Section 8, clause8.24(a); supplied andfitted to chowkats etc complete all as specified and as directed |
| 36 | Supply and fix 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 37 | Supply and fix aluminium anodised towerbolt 200 mm long of extruded section etc complete all as specified and as directed |
| 38 | Supply and fix aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed |
| 39 | Supply and fix Mild Steel 300mm, ordinary rat tailrod pattern springsincluding roller androller plate etc complete all as specified and as directed |
| 40 | Supply and fix150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 41 | Supply and fix stainless steel decorative curtain rod of 25 mm bore (weight not less 400 gms per running meter) incl fancy finale caps cap (02 nos in each curtain rod)incl Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm longetc complete all as specified and as directed |
| 42 | Supply and fix Brass Chromium plated tubular towel rail, 20mmdia, D type, 60cm long between flangesetc complete all as specified and as directed |
| 43 | Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed |
| 44 | Material and labour for framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walks ways, railing framed work of water tanks and similar work etc complete all as specified and as directed |
| 45 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 46 | All as per item No 45 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed |
| 47 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 48 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed |
| 49 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding typewithout sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respectiveitems. |
| 50 | Material and labour for providing and fixing stainlesssteel (Grade 304) railing made of hollow tubeschannels, plates etc., including welding, grindingbuffing, polishing and making curvature (where everrequired) and fitting the same with necessarystainless steel nuts and bolts complete, includingfixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc complete all as specified and as directed |
| 51 | Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes fixed with angle cleats or other connecting plates (FE-410 grade E 250 Quality B) complete all as specified and as directed |
| 52 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 53 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 54 | Supply and fix 18mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (both side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker\"s instructions etc complete all as specified and as directed |
| 55 | Supply and fix 18mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (one side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker\"s instructions etc complete all as specified and as directed |
| 56 | Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 with (using 40 mm graded stone aggregates) asin sub base of flooing etc complete all as specified and as directed |
| 57 | Material and labour for 75 mm thick PCC 1:3:6, type C-1, (using 20 mm graded aggregates) as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \"A\" complete all as specified and directed. |
| 58 | Material and labour for cement concrete type B-0 1:2:4 (12.5mm graded stone aggregates) 25 mm thick as in sub base of flooring etc completeall as specified and as directed |
| 59 | Material and labour for coloured glazed ceramic tiles as in vertical surface 450X 350X 7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed. |
| 60 | Material and labour for Joint free coloured glossy finished Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. |
| 61 | Material and labour for heavy duty parking tiles size 300mm X 300 mm X 10 to 12 mm thick white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 15mm thick in cement mortar (1:4) complete all as specified and directed. |
| 62 | Material and labour for exterior grade, coloured glossyfinish rubber moulded, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thickset, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floorincl 15mm thick screed bed in CM 1:6 etc complete all as specified and as directed |
| 63 | Material and labour for Rubber Moulded glossy finished pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006of 80 mm thick, M-40 grade to match with grey cement and pigment etc complete all as specified and as directed |
| 64 | Material and labour for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 65 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfacefinished and smooth without using extra cement etc complete all as specified and as directed |
| 66 | Material and labour for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound where ever is reqd as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 67 | Material and labour for 10 mm cement plastering in CM (1:3) as in horizontal and vertical surface of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 68 | Material and labour for applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer\"s instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed. complete all as directed. |
| 69 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic distemper over a coat of primer over 1.00mm thick wall care putty complete all as specified and as directed. |
| 70 | Material and labour for prepration of newaly plastered surface of wall, applying a coat ofwall care putty not less than 1.5 mm thick and two coat ofacrylic exterior weather resistant paint (weather proof paint) of tint as approved over one coat of External weather coat primer etc complete all as specified and directed . |
| 71 | Material and labour for preparing new plastered surface of wall and applying two coat of cement base paint ove a coat of cement primer etc complete all as specified and as directed |
| 72 | Material and labour for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 73 | Material and labour for preparing newely plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed |
| 74 | Supply and fix 4mm thick sheet glass ofordinary quality and glazing with oil putty or wooden beading to wooden frame or steel framein squares n exc 0.50 sqm in each pane complete all as specified and as directed |
| 75 | Material and labour for preparation of New woodensurfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 76 | Material and labour for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 77 | Material and labourfor preparing new concrete surface (Kerb Stone) and applying two coat of synthetic enamel paintover a coat of primer etc complete all as specified andas directed |
| 78 | Supply and fix GI Tubes, 15 mm dia bore of pies \"medium gradegalvanised, withall fitting andfixed completeto walls andceilings or laidin floors etc complete all as specified and as directed |
| 79 | Supply and fix GI Tubes, 20 mm dia bore of pies \"medium gradegalvanised, withall fitting andfixed completeto walls andceilings or laidin floors etc complete all as specified and as directed |
| 80 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 2000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 81 | Supply and fix 15 mm dia bore CP Bib taps, fancy type long body withcrutch orbutterflyhandle, screwed down, screwed foriron pipe or forbrass ferrule andfixed etc complete all as specified and as directed |
| 82 | Supply and fix 15 mm dia bore Brass CP mixer (swan neck type suit for kitchen sink) formixing hot & coldwater screweddown for iron pipeand fixed etc complete all as specified and as directed |
| 83 | Supply and fix 15 mm dia bore CP fancy type long body Stop valves/ Angle cock castcopper alloy,screweddown,highpressure,withcrutch or butterfly handle,screwed bothends forironpipe orforunions and fixed etc complete all as specified and as directed |
| 84 | Supply and fix 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 85 | Supply and fix 110 mmPVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls/ Trenchesetc etc complete all as specified and directed |
| 86 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 87 | Supply and fix Soap dish, any type, fixed toplugs with chromium platedbrass screws etc complete all as specified and as directed |
| 88 | Supply and fix double bowl kitchen sinks made of stainless steel1.00 mmthickkitchenorlaboratorywith plugs, washers and wastes; including bedding in cement mortar on to dwarf wall orincluding fixing cantilever bracketsand connecting union to pipe,overall size 1000mm x 500mmX225 mm, 32 mm bore waste CP couplingand 32mm bore LDPE pipe 600 mm long complete all as specified and directed. |
| 89 | Supply and fix 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed |
| 90 | Supply and fix75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 91 | Supply and fix stainless steel kitchen basketin various type of baskets susch as plaint basket height 4\", Thali basket 8\" height, Cupsaucer basket 4\" heigt, and perforated cutlury basket4\"height all as specified and directed. |
| 92 | Supply and fix Stainless steel channel for basket sizes 600mm long and 46mm wide all as specified and directed |
| 93 | Supply and fix Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment+ 2.50mm & depth adjustment 4mm complete all as specified. |
| 94 | Supply and fix 200mm size powder coated Stainless steel handle fit to modular section etc complete all as specified and as directed |
| 95 | Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surfacefor mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed. |
| 96 | All as per item serial No 95 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and directed. |
| 97 | All as per item serial No 95 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and directed. |
| 98 | All as per item serial No 95 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. |
| 99 | Supply and fix switch piano type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and directed. |
| 100 | Supply and fix socket,outlet flush type 5 pin 6 am 230 v complete all as specified and as directed. |
| 101 | Supply and fix switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and directed. |
| 102 | Supply and fix switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and directed. |
| 103 | Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 104 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 105 | Supply and fixMCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 106 | Supply and fix MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 107 | Supply and fix in MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and directed. |
| 108 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers including making hole in existing wall suitable for fixing of exhaust fan and making good complete all as specified and directed. |
| 109 | Supply and fix LED 35 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 110 | Material nand labour forbuilding secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 111 | Material nand labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completioncomplete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 112 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 |
| 113 | Supply and fix steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as specified and directed. |
| 114 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed |
| 115 | Material and labour cutting existing steel tubing of 25 mm for alterations or additions complete all as specified and directed. |
| 116 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 117 | Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified |
| 118 | Material and labour for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as speciffied and as directed. |
| 119 | Material and labour for Manual boring under roads/hard standingby reqd T&P without disturbing the top surface of the road for throughing the cable in GI Pipe of n exc 40 mm dia all as specified and directed. |
| 120 | Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 4.0 core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 121 | Material and labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate)as in foundation of polecomplete all as specified and directed.. |
| 122 | Supply and fixing PVC pipe of size 20 mm dia medium grade including all connected acessories complete all as specified and directed. |
| 123 | Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35 sqmm 3.5 core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 124 | Supply and fix bollard light cone series Tulip type act as an imposing street furnityre a silient observed, diffuser at the upper portion adds functional value with IP-65 with in built 8/10 watt LED and connedted with all fixing accessories including foundation, nuts bolts etc. complete all as specified and directed |
