|
| 1 | Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge |
| 2 | Excavation in trench not exc 1.5m wide and not exc 1.5m in deep and getting out in soft/loose soil |
| 3 | M&L for PCC 1:4:8 type D-2 using 40mm graded aggregate as in foundation mass concrete |
| 4 | M & L for brick work with Cement Mortar1:6 using sub class \"B\" bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed. |
| 5 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cementcomplete. |
| 6 | M&L Rendering 10 mm thickin CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified. |
| 7 | M&Lfor sand filling under floor or in foundations including watering and consolidation |
| 8 | M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified. |
| 9 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, surface finished fair and even, complete all as specified & directed. |
| 10 | M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified. |
| 11 | M&L for preparation of newly plastered surfaces of walls and applying two coats of weather proofing exterior emulsion paint (Apex ultima Luxury emulsion ) of asian or equivalent by spray gun / spray machine as per approved make list in particular specification incl one coat of primer/putty up to 4 story bldg complete all as spd and as directed. |
| 12 | M & L for applyingtwo coats of oil bond destemberover one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed. |
| 13 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 14 | M&L aluminium alloy powder coated windows including aluminium coated frames, silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazingclips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed |
| 15 | M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required includingsling bolt 300mm, alu hinges 150 mm, alu handle 150 mm ,tower bolt 150 mm , \"SAMRAT\" ,looking arrangement \"GODREJ\" rubber gasket and door stopper complete all as specified and directed. |
| 16 | S&F aluminium bodyhydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairscomplete,all as specified anddirected. |
| 17 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed. |
| 18 | S & F for Vitrified ceramic tiles light shade 10 mm thick (squqre/rectangular), polished area of each exceeding 0.42 sqm but not exceeding 1.00 sqm ( size 600 mm x 1200 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar (1:4) all as specified and directed. |
| 19 | M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixturein CM (1:4) with pointing and white cement (1:2)of pigment to match with shade of granite all as spd. |
| 20 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 21 | S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 22 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing , cooler stand and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 23 | S&F Endura colours paving tiles 300cm X 300cm x 9-10mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 24 | Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified. |
| 25 | Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point. |
| 26 | M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge |
| 27 | S&F solid PVC Wall Lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvent cement/adhesiveand fixing at site on PVC/woodenframe as per specifications and drawing given in SSR. Note :- Filletsshall be measured and paid for separately. |
| 28 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR and as directed. |
| 29 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 30 | S&F of Stainless steelauto closing hinges openable at 0 degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. |
| 31 | S&F of stainless steel handles 100 mm sizefor kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. |
| 32 | S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws. |
| 33 | “S&F Modular Cabinet Kitchen accessoriesof Stainless Steelgrade-304,6mm size rod thicknessincluding :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket,(iv) Cup & saucer basket, (v) Glass basket,(vi) Plate basket, |
| 34 | S&F 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all asspecified. |
| 35 | Dismantling floor, hearth or wall tilesincluding cement mortar concrete bedding amdremoving rubbish off the premises complete all as specified and directed. |
| 36 | M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified. |
| 37 | M&L Glazed ceramic colouredtiles (600X300mm) x 7mm thick on vertical surfaces etc,set and jointed in neatcement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4. |
| 38 | S & F mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165. |
| 39 | M&L for Preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper complete all as specified. |
| 40 | Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge |
| 41 | S & F50 mm dia Galvanised Iron steel tubing, medium grade as in spout in short length, complete all asspecified. |
| 42 | S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 43 | S&Ffactory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made |
| 44 | M&L for 22 to 25mm chequered ultra tiles over 15 mm thick screed bed in cm 1:6 and jointed and pointed in white cement mixed with pigment to match the shade of tiles of flooring all as directed. |
| 45 | S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. |
| 46 | M & L Machine pressed precast concrete PU coated colourinterlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 80 mm thicknessM-40 Grade complete all as specified |
| 47 | Supply only 3.15 mm dia galvanised steel chain link fencing, 100X100 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified. |
| 48 | Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc. including provn of winding wire all as specified. |
| 49 | M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) for use in chain link fencing as wind tie all as specified. |
| 50 | Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge. |
| 51 | M&L for Straight or Circular raking cutting Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc.including rubbed finish and good well surface all as specified and directed. |
| 52 | M&L for cement concrete 1:2:4 type B1(using20mm graded stone aggregate) as in blocks for hold fast, coping,benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete allas specified. |
| 53 | M&L 25 mm thickPCC 1:2:4, type B-0 using 12.5mm graded crushed aggregates as in floor surfaceall as specified and directed. |
| 54 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified. |
| 55 | M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mmthick screed bed or bedding layer in CM 1:6 etc complete all as specified . |
| 56 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 57 | Dismantling false ceiling boards/ wall pannel any description and in any position incl frame work. |
| 58 | S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm) |
| 59 | S&F 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 60 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for |
| 61 | M&L forPCC 1:3:6 type C-2 (40 mm graded agg)for post holes, foundation, fitting and mass concrete complete all as specified and dircted. |
| 62 | S&F powder coated Anodiesed aluminium frame for partition, doors, windows, ventilators with one or more rebates incl. joining cleat for fixing etc. complete all as specified. |
| 63 | S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw withetc. |
| 64 | Supply and fixing PVC sheet consisting of 5mm thick light colour PVC sheet inclusive of fixingon PVC frame /Aluminium frame at site etccomplete all as specified and as directed by Engineer-in- charge. |
| 65 | S&F powder coated not less than50micron Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 66 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS :1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved stadandered section and fixed to existing window frame with CP brass/stainless steel screws @200mm c/c, incl cutting the grill to proper opening size for ficing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-charge. |
| 67 | Supply and fixing Floor door stopper 140mm long of aluminium alloy and tongue, anodised with hard drawn steel spring fixed in floor etc completeall as specified & directed by Engineer-in-charge. |
| 68 | S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micronin any size each pane. |
| 69 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with tinned tacks or galvanised wire staples. |
| 70 | S&Fsteel work as in posts and struts , flats in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 71 | Dismantling and Re-Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standereds, rails, straining blots, etc. incl provn of binding wire. |
| 72 | Supply & Fix chain link MS galvanised fencing any size (75x75mm)or any type complete. |
| 73 | S&F 2mm thick fibre glass reinforced translucent plain sheeting withside lap fixed with srew. |
| 74 | S&F mild steel, plain black sheet 1.25mm thick in wall clading, steel gates incl round headed screws, clout nails or rivets and fixed to wood or steel framing. |
| 75 | S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 76 | M & L for Non skid 600x600x8 to 10mm thick coloured ceramic tiles as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles. |
| 77 | M&L for Powder coated aluminium(minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up thegaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 78 | M&L for PVC false ceilings 6mm are watertight, just like gypsum false ceilings, and are more effective and lasting in high moisture environments like balconies, bathrooms, and basements |
| 79 | M & L for Point wiring complete with 1.5 sqmm single core PVC unsheathed insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn in and including rigid PVC conduit heavy duty ISI Marked not less than 20 mm dia including all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC unsheathedinsulated copper cable FRLS as earth continuity conductor and connected to earth dolly including branded metal flush box/M S steel terminal boxes duly make embossed on it including provision of modular inner and outer cover plates with laminated top sheet cover for housing switches,socket out let and fan regulators etc concealed in wall and making good of disturbed surfaces including plastering with cement morttar and painting/whitte washing to match the existing shade of distemper/OBD or plastic emulsuion paint as required at site all as specified and as directed for the followings:- |
| 80 | Onelight/fan or bell point controlled by oneway switch with 1.5 sqmm copper cable PVC insulated FRLS complete including making necessary electrical connections all as specifioed and directed. |
| 81 | One 3 pin 5 Amps socket outlet point controlled by one switch on same board with 1.5 sqmm copper cable PVC insulated FRLS complete. |
| 82 | One 3 pin 5 Amps socket outlet point controlled by oneway switch on independent board with 1.5 sqmm copper cable PVC insulated FRLS complete. |
| 83 | All as item No-79 above but with cable 2.5 sqmm copper cable PVC insulated FRLS complete. |
| 84 | All as per item No 79 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer in charge |
| 85 | S&F switch Modular type 6 Amps 1 Way,1 module, 230V AC completeincluding making necessary electrical connections all as specifioed and directed.all as specified. |
| 86 | S&F in replacement Modular switch socket outlet 3 pin 6 Amp complete all as specified. |
| 87 | S&F Modular switch socket combination 6 pin 16 Amp 3module complete including making necessary electrical connections all as specifioed and directed. all as specified. |
| 88 | S&F bell ding dong AC 230 volt single poleincluding making necessary electrical connections all as specifioed and directed. |
| 89 | S&F bell push modular type 6A single module including making necessary electrical connections all as specifioed and directed. |
| 90 | Supply and fixing ceiling fans complete with remote, blade, down rods, with accessories, rated speed not less than 330 RPM, 230 V,1200 mm sweep, air delivery not less than 220 CMM,BEE five star rated voltage range 140-280 volts with brushess direct current motor (BLDC) including making necessary electrical connection with and including three core copper multistanded cable of size 1.5 sqmm all as specified and directed by Engr-in-Charge. Make :Halonix/Gold star/Orient/Crompton |
| 91 | Supply and fix LED batten luminaire surface mounted 4 feet, system wattage of 20 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. |
| 92 | Supply and fixing LED luminaries 600mmx600mm 36watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holders and LED lamp siutable for roof ceiling including connecting up with driver three core copper conductor cable of suitable size all as specified. |
| 93 | Supply and fixing lamp holder polycarbonated type with back plate suitable for batten fittings. |
| 94 | Supply and fix bulb LED 9 watt, 6500K,900 Lumen complete. |
| 95 | S&F 60 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover.System level efficacy of the Luminarie should more than 120 lm/W. The color temperature is around 6500 K with a color rendering index of 70.The luminaire is IP:65 protected.It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, High and low voltage protection along with a surge protection of 4 KV internal including provision of suitable dia GI light grade pipe1.2 meter length bend to shape and necessary clamps, nut, bolts and washers etc for fixing/mounting of light fittings and including two coats of super enamelled black paint over a coat of red oxide primer complete as specified and directed. |
| 96 | M&L sheet metal enclosure for DBs when MCBs to be used single pole and neutral double door with 200 amps rated bus bar 8 ways complete. |
| 97 | M&L sheet metal enclosure for DBs when MCBs to be used triple pole and neutral double door with 200 amps rated bus bar 4 ways complete all as specified and directed. |
| 98 | Supply and fix in repair MCCB 125 Amps, FP 415 volts 16 KA, 4 pole, 50 HZ with thermal magnetic setting complete all as specified and directed. |
| 99 | Supply and fixing 415V, 10KA \"B\" curve miniature circuit breaker (MCB) of three pole and neutral and current carrying capacity 63 amps complete with connection testing and commissioning. |
| 100 | Supply and fixing miniature circuit breaker (MCB) of single pole and neutral and current carrying capacity 40 amps 240V 10KA\"C\" curve testing and commissioning. |
| 101 | Supply and fixing 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 102 | M&L ceiling rose 3 terminals polycarbonate isolated body complete. |
| 103 | S&F in repair Sub main wiring with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistrandedcopper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories on surface of walls complete all as specified and directed. |
| 104 | Supply and fixing DBOXx MCB protected socket 15 amps PVC plastic base (white) with plug top 25 amps and MCB single pole 32 amps 230 volts 10 KA \"C\" curve complete including making necessary electrical connection all as specified and directed. |
| 105 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge earth plate at a depth not less that 1.5m below normal ground level connected to galvanised steel earth lead wire, 4mm dia by means of bolts, nuts, check nuts and washewrs of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre- cast RCC (1:2:4) type B1 cover slab 54 cmx54cmx 5cm with one handle for lifting make out of 8mm dia MS bar, provision of funnel, wire mesh, 20mm bore galvanised steel tubing (med grade) for watering charcoal or coke and salt in alternate layers, 15mm bore galvanised steel tubing light grade for protection of earth lead connection upto 7.5 mtr length (minimum), necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR part-I. |
| 106 | Supplying, laying or fixing, jointing and testing LT under ground electric power cablecrossed linked polyethylene ( XLPE Cable)insulated, two or more core, galvanised steel strip or wire armoured,ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 25Sqmmx3.5 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers andpipe shall be measured and paid separately under appropriate items ). |
| 107 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc, or for shafts, wells, cesspits, man holes, pier holes etc not exc 10 sq m on plan and getting out in soft / loose soilcomplete all as specified and directed. |
| 108 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed. |
| 109 | Removing excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 110 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 111 | M & L for brick protection cover to under ground cables with sub class \"B\" over burnt bricks laid dry and flat abutting each other with gaps between adjuscent bricks not exceeding 10 mm complete all as specified and directed. |
| 112 | Supply & fixing GI Pipe light grade 40 mm dia, ISI marked, of required length for protection of cables in wall /pole /under road complete including necessary MS clamps, nuts, bolts and washers etc; all as specified. |
| 113 | S&Fswitch Modular type 16 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge. |
| 114 | M&L for breaking old existing wall of any type and making a hole for provn for fixing of Electric Chimany pipe as delivered with chimney by OEM including making good to the disturbed surfaces of wall/ portion and matching with existing colour of wall including plastering and finishing with putty all as specified and directed. |
| 115 | Supply and Fixing wall mounted angular Electric chimney black colour of suction power not less than 1220Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speedmotor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent LED light with digital display , including ducting not less than 12 feet as per site requirement complete all as specified and as directed by Engr-in-Charge Make: Haier/ Hindware. |
| 116 | Supply and fix wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord (two) system complete all as specified and directed. |
| 117 | Supply and fixMCB DB SPN 8 way Horizontal, IP-43 Protection double door 240 V AC 50Hz with for MCBSPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link completeall as directed by Engineer-in-Charge. |
| 118 | S&F MCB SPN 32-63 Amps 240 volts 10 KA \"C\" curve and making necessary electrical connections all as specified and directed. |
| 119 | S&F MCB SP6-32 Amps 240 volts 10 KA\"C\" curve and making necessary electrical connections all as specified and directed.. |
| 120 | Supply,installation, testing and commissioning instant electric water heater with heating element of capacity 3 ltrs complete with all accessories such as safety valve, thermostat, NRV, connection piece etc and connecting with water mixture complete with all other accessories reqd for making water connections all as specified and directed. |
| 121 | Supply and fixing and connecting LED post top light die cast aluminium housing spigot, powder coated top cover opal PC diffuser having IP 65 protection complete of 45/50 watt LED 100Lm/watt including making necessary electrical connections with suitable size copper multi stranded 1100 volts FRLS copper cable all as specified and directed. |
| 122 | Supply and fixing LED bollard light aluminium extrusion, opal, polycarbonate diffuser for spot and glare free lighting of suitable height not less than 1000mm having IP 65 protection complete of 10/15 watt. |
| 123 | S&F Modular socket outlet 6A/16 Amp 2/3 pin 2 module complete all as specified and directed. |
| 124 | Supply and fixing ceiling fans complete with blade, down rods, with remote and accessories rated speed not less than 330 RPM, 230 V, 1200 mm sweep, air delivery not less than 220 CMM, BEEfive star rated voltage range 140 - 280 volts with brushess direct current motor (BLDC)all as specified and directed by Engr in Charge. |
| 125 | M&L tube light grade galvanised with fittings complete to walls and ceiling or laid in floors 40mm dia including all connected accessories to fix gate/garden light fittings with pillar/in ground. |
| 126 | S&F wiring with two runs of 10 sqmm twin core PVC insulated cable 1100 volts grade, single stranded aluminium conductor cable drawn through and including 25 mm dia non metalic rigid PVC conduit and conduit accessories laid not less than 30cms deep in any type of soil complete including returning filling and removal of excavted soil to a distance not less than 50 mtr all as specified and directed. |
| 127 | M&L for point wiring complete with 1.5sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through existing PVC conduit, including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty and fabricated branded modular metal flush box/MS Steel terminal boxes, concealed in walls with suitable modular inner and outer plate/3mm thick laminated top sheet cover for housing switches, socket out let and fan regulators etc complete all as specified and directed by Engineer in charge for one light/fan point controlled by one switch. |
| 128 | M&L sub main wiring with two single core PVC insulated FRLScables with stranded copper conductors 4.0 Sqmm ,1100 volts grade on & including PVC conduit not less than 20 mm nominal diacomplete with all accessories medium grade and copper cable 4 Sqmm continuous earth wire complete all as specified and directed(Note:- (a)Three run of wire with 01 run of PVC conduit shall be measured as one length |
| 129 | S&F Modular box with MCB 20 Amp complete with metal box and 3 Pin Top Plug complete all as specified and directed.Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever required. |
| 130 | S & F water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity25 Ltrs, having heating element 1.5 KW and not less than 5 star rating,suitable for ,230 volt,50 Hz electric supply complete all as specified and directed . |
| 131 | S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed. |
| 132 | S&F 15mm bore galvanised iron pipe medium gradewith all fittings fixed to wall / ceiling or laid in floor including connections complete all as specified and directed. |
| 133 | S&F bib tap 15mm bore of cast copper alloy (heavy duty) CP fancy type scrwed to iron pipe and fixed complete all as specified and directed. |
| 134 | S&F stop cock of 15 mm dia cast copper alloy (heavy duty) CP fancy type screwed for iron pipe and fixed complete all as specified and directed. |
| 135 | Cutting chases for concealed watertubing or concealed conduct wiring etc and making good cutting n exc 10cm girth in brick wall complete all as specified and directed. |
| 136 | Schedule of Credit |
