|
| 1 | Repair to potholes any depth, not exceeding 1 Sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and exceeding 50 mm & not exceeding 100 mm deep, including removing to a distance exceeding 50 mtr complete all as specified and directed. |
| 3 | M&L for two layers 75 mm thick (compacted thickness 150 mm) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using granite, trap or Basalt aggregate complete all as specified and directed. |
| 4 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 sqm and not exceeding 50 mm deep, including removing to a distance notexceeding 50 mtr complete all as specified and directed. |
| 5 | M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly apriming/ tack coat with bituminous primer at 5 kg per 10 sq metre using paving bitumen complete all as specified and directed. |
| 6 | M&L for premix bituminous, macadam 50 mm consolidated thickness with binder (Paving bitumen of VG-30) content at 4% by weight of total mix, laid/ rolled and compacted with 8 to 12 tonne power roller to required gradient and camber including use of mechanical paver complete all as specified and directed. |
| 7 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre using paving bitumen complete all as specified and directed. |
| 8 | M&L for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 tonne capacity power roller complete all as specified and directed. |
| 9 | M&L for applying road marking paint with reflective thermostatic white road marking paint either continuous or broken lines over existing or new painting surfaces of cement or bituminous surface, laid down through road marking machine using thermostatic material by incorporating the white glass powder for reflectively in 100 mm to 150 mm width in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beds dispenser, propene tank heater and profile shoe heater including cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete all as specified and directed. |
| 10 | M&L for machine pressed precast concrete interlocking coloured paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 11 | Laying/ refixing only machine pressed precast concrete interlocking coloured paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 12 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land complete all as specified and as directed. |
| 13 | M&L for 100mm thick PCC 1:3:6, Type C2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 14 | M&L for coloured and polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with grey pigment cement and pigments, including over 15 mm thick screed bed in cement mortar (1:4) complete all specified and directed. |
| 15 | M&L for 100 mm spread thickness Moorum/red bajri, spread, rolled and consolidated to gradient and camber required complete all as specified and directed. |
| 16 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 17 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed. |
| 18 | M&L for 75 mm thick PCC 1:3:6, Type C2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 19 | M&L for sand filling/ cushioning under floors or in foundations, well ramming including watering and consolidation complete all as specified and directed. |
| 20 | M&L for PCC 1:2:4 type B1, 20 mmgradedstone aggregateinkerbsormud stopsroundedor chamferededgesetc complete all as specified and directed. |
