|
| 1 | Supply, installation, testing and commissioning of 230 mm dia, medium duty, wall mounted Exhaust Fan with double ball bearing including required wall opening with suitable RCC collar and finishing of the wall, Embedment of stainless steel bolts (4 Nos. of 6 mm x 60 mm) for mounting of Exhaust Fan on the wall,supply and fixing of Stainless Steel Mesh withAluminium Frame along with 3 Core, 1.5 Sq.mm PVC insulated, FRLSH sheathed copper flexible cables of required length, with supply and fixing of 6A, 3 Pin, Plug top with indicator , refer Drg No. GSO/ESG/ESD/KTS/EXF/SS GRILL/DRG-02 for SS meshas per the detailed specification and as directed by Engineer-in-charge. |
| 2 | Supply, installation, testing and commissioning of 230 mm Dia Medium Duty Wall Mounting Exhaust Fan on Wooden frame window including necessary modification on the existing window to accommodate the Exhaust fan including supply and fixing of Stainless Steel Bolts for mounting of Exhaust Fan on the wooden frame, Stainless Steel Wire Mesh, supply & connecting of 3 C x 1.5 Sq.mm PVC insulated, FRLSH sheathed copper flexible cables of required length with 6A, 3 pin plug top with indicator, refer Drg No. GSO/ECS/KTS/EXF/W-INS/DRG-01 for modification ofwooden frame window and fixing of exhaust Fan and SS mesh as per the detailed specification and as directed by Engineer-in-charge. |
| 3 | Supply, installation, testing and commissioning of 230 mm dia medium duty wall mounting Exhaust Fan including supply ofstainless steel mesh withaluminium frame along with supply of3 Core, 1.5 Sq.mm PVC insulated, FRLSH sheathed copper flexible cables of required length, supply and fixing of 6A, 3 Pin, Plug top with indicator, refer Drg No. GSO/ESG/ESD/KTS/EXF/SS GRILL/DRG-02 for SS meshas per the detailed specification and as directed by Engineer-in-charge. |
| 4 | Supply and Installation of following sizes of PVC trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.(Refer Sec VI, Clause No.29) |
| 5 | Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW/Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, switches/ sockets, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 6 | Wiring for Exhaust fan point up to 3Mtr height with 2 Runs of 1.5 Sq.mm Copper wires for Phase & Neutral and 1 Run of 2.5 Sq.mm Copper wire for Earth from Switch board to Power point including supply of 3 pin 6A shuttered type Socket, 2Nos. 2 Modular plate and 1 No 6A modular switch and 1 No. dummy plateNote : Anticipated average route length approximately 6.0 meters |
| 7 | Supply and Embedment of 50mm Deep, Square/Rectangular Concealed type and GI double earthedmodular metal boxes of the following types and as specified in RCC/Brick/Concrete Block Masonry with finishing and making good as per the detailed specification. (Refer Sec VI, Clause No.15.12). |
| 8 | ONE/TWO Module |
