|
| 1 | Supply, transportation, installation, testing and commissioning of the following LED Luminaries of suitable wattage as per the detailed specification and as directed by the Engineer-in-charge. (Refer Sec VI, Clause No.16.0). |
| 2 | 29W (Max),4000 lm output, 6500 K, 1200 mm long, LED batten withCRCA housing, suitable for Ceiling, Wall and Downrod mounting. |
| 3 | 17W (Max), 2000 lm output, 6500 K, 1200 mm long,LED Batten with CRCA housing, suitable for ceiling, wall and downrod mounting. |
| 4 | 15W (Max),1600 lumen output, 6500K, square type, LED Luminaires with polycarbonate material housing, suitable for surface mounting. |
| 5 | 12W (Max), 1200 lm output, 6500 K, 600 mm long, LED batten with extruded Aluminium housing, suitable for Ceiling and Wall mounting. |
| 6 | 6W (Max), 700 lm output, 6500K, IP 66 Protection LED Bulkheadwith Aluminium die cast housing and polycarbonate diffused cover suitable for surface mounting. |
| 7 | 25W (Max), 3000 lm output, 6500 K, 600mm x 600mm Recessed mounting type LED Light with CRCA housing suitable for 2 x 2 grid false ceiling. |
| 8 | 2X20W (Max), 4200 Im output, 6500 K, suspended type LED Luminaries made of die cast aluminium with clear glass cover flame proof fitting. |
| 9 | 100W (Max), 12000 lm output, 5700 K, Flood light with IP 66 protection class and pressure diecast aluminium housing and covered with tempered glass. |
| 10 | Supply and replacement of 20mm dia GI conduit downrod for installation of luminaries, fans etc as per the detailed specification.(Refer Sec VI, Clause No.16.5). |
| 11 | Supply and Installation of 25 X 12 mm size of PVC Mini trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.(Refer Sec VI, Clause No.29) |
| 12 | Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification.(Refer Sec VI, Clause No.18) |
| 13 | Wiring with 1 Run of 1.5 Sq.mm Copper wire |
| 14 | Wiring with 1 Run of 2.5 Sq.mm Copper wire |
| 15 | Identification and rectification of shunt or series fault (Minor fault) in lighting or power circuit wiring in labs / building as per scope of work.(Refer Sec VI (MNC), Clause No.4.0) |
| 16 | Removal of light fixtures installedup to 4.0 Mtrs height in various building.(Refer Sec VI (MNC), Clause No.21). |
| 17 | Supply and Fixing of 3pin, 5A, Ceiling rose on the Teak wooden block including connection as required. |
| 18 | Supply and Installation of MS fabrication with 1 coat primer & 2 coats synthetic enamel paint MS Brackets, Supports, Frame work, Clamps, Base Channels, etc. fabricated out of angle / Channel / Rods etc. The rate quoted shall include the cost of fabrication / welding, cleaning and 1 coat primer & 2 coats synthetic enamel painting as follows including supply of required, fasteners, nuts, washers, etc.(Refer Sec VI, Clause No.11). |
| 19 | Supply and Installation of laminated Hylam sheet of 3mm thickness over the boxes and as per the detailed specification. |
