|
| 1 | Note:- (a) Debris obtained from any dismantling or demolition shall be removed beyond MOD land and rates shall be considered inclusive in respective items quoted rates.(b)Contractor shall be liable to taking down and refixing of IGL Gas pipe line and meters if required during execution of work through IGL representative.(c)Contractor shall be liable to repair of electric cable/OFC cable/pipe line(any description) if damaged during execution of work. (d)Work shall be executed in multistorey bldgs (i.e. upto G+8 incl Mumty). Rate of scoffolding/safety arrangements are included in item rates. No extra amount shall be paid.(e) As per requirement work may be excuted at any given site, within the AoR of AGE B/R-III (W) Delhi Cantt. |
| 2 | Demolition of cement concreteof any description in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | Water proofing treatment to sunken floor of RCC slab as following steps- |
| 4 | (a) After cleanig the surface applying a coat of cement slurry @ 3kg/sqm over and including 20mm thick cement plaster in 1:4 with WPC @3% by weight of cement on bottom/sides of RCC.( WPC measured and paid separetely as supply only) complete all as specified and directed. |
| 5 | (b) Applying first coat of chemical pidifin 2K (DR Fixit or equivalent) on cleaned plastered surfaces @ 0.86 kg/sqm (min) as recommended by manufacturers. Then Provide a layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as manufactures recommendations. After Apply second coat of chemical pidifin 2K (DR Fixit or equivalent) @ 0.86 kg/sqm (min) layer glass fibre mesh as recommended by manufacturers complete all as specified and directed. |
| 6 | (c) Spouts of 40mm dia GI pipes light grade projecting at least by 150mm clear of face of the outer wall complete all as specified and directed. |
| 7 | (d) 30 mm thick PCC 1:2:4 type C1 using 20mm graded stone aggregate mixed with WPC @ 3% by weight of cementshall be provided on bottom complete all as specified and directed. |
| 8 | (e) After laying of CI connections apply two coats of hot bitumen 85/25 grade @ 1.7 kg/sqm over vertical sides and floor of sunken portion complete all as specified and directed. |
| 9 | (f) The sunken portion shall be filled with PCC 1:7:12 type F2 using 40mm brick aggregate after carrying out required test for joints/water proofing.Note 1:- The treatment shall also be provided over side wall upto a ht of 150 mm above FFL complete all as specified and directed. |
| 10 | Supply only integralwater proofing compound of approved make only complete all as specified and directed. |
| 11 | M&L 40 mm thick, Cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate)as in floors finished even andsmooth using extra cement complete all as specified and directed. |
| 12 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 13 | S&FPVC (SWR) pipes single socketed in any length with rubberring joints fixed to wall/floors 110mm bore including suitable clamps etc complete all as specified and directed. |
| 14 | S&F PVC (SWR) bends any radius 110mm bore.complete all as specified and directed. |
| 15 | S&F PVC (SWR) branch piece single (single \"Y\") equal or unequal 110mm bore complete all as specified and directed. |
| 16 | S&F PVC (SWR) branch piece double (single \"Y\") equal or unequal 110mm bore complete all as specified and directed. |
| 17 | S&F PVC(SWR) junction single (single T\") equal or unequal 110mm bore complete all as specified and directed. |
| 18 | S&F PVC(SWR) junction single (single T\") with access door equal or unequal 110mm bore complete all as specified and directed. |
| 19 | Dismantling of cast iron or reinforced concrete drain pipes upto 100mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 20 | S&F100mm cast iron soil,waste and vent pipe, in any length with or without ears,with cements joints but fixed to walls, using necessary clamps, etc complete all as specified and directed. |
| 21 | S&F Cast ironbends (any radius) 100mm bore complete all as specified and directed. |
| 22 | S&F Cast ironbranch piece single (single \"Y\") equal or unequal 100mm bore complete all as specified and directed. |
| 23 | S&F Cast iron sockets double collars 100mm bore complete all as specified and directed. |
| 24 | S&F 100mm Cast iron traps P/S complete all as specified and directed. |
| 25 | S&F 100mm Cast iron vent cowels complete all as specified and directed. |
| 26 | S&F75mm cast iron soil,waste and vent pipe, in any length with or without ears,with cements joints but fixed to walls including suitable clamps complete all as specified and directed. |
| 27 | S&F Cast ironbranch piece single (single \"Y\") equal or unequal 75mm bore complete all as specified and directed. |
| 28 | S&F Cast iron branch piece double (single \"Y\") equal or unequal 75mm bore complete all as specified and directed. |
| 29 | S&F in repair PVC (SWR) floor trap 100/110mm dia, plain with grating including jointing with solvent cement complete all as specified and directed |
| 30 | S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and directed |
| 31 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 32 | Taking up or down 15mm bore steel tubing & connections, (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 33 | Taking up or down 20mm bore steel tubing & connections,(Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 34 | S&F GI Tubes, 15mm bore`medium grade\" with all fitting & fixed complete to walls & ceilings or laid in floors complete all as specified and directed. |
| 35 | S&F GI Tubes, 20mm bore`medium grade\" with all fitting & fixed complete to walls & ceilings or laid in floors complete all as specified and directed. |
| 36 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed. |
| 37 | S&F in repair 15mm bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 38 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified |
| 39 | S&F in repair 20mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engineer in Charge. |
| 40 | S&F in repair 15mm angle cock with flange cast copper alloy, chorminium plated, fancy type, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge. |
| 41 | S&F in repair 15mm dia stop cock fancy type cast copper alloy chromium plated, concealed type with long shankwith crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge. |
| 42 | S&F in repair Brass Chromium plated wall ,sink,WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe in sink/ wall mixer etc. complete all as specified and directed . |
| 43 | S&F in repair Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 44 | S&F in repair Chromium platedsoap dishincluding fixing arrangement complete all as specified and directed . |
| 45 | S & F in repairs stainless steel kitchen plate rack of size 600x600 and 1 mm thick (18 gauge) complete all as specified and directed. |
| 46 | S&F in repair, Vitreous china wash hand basin, white, flat back, size 580 x 450 mm size incl cutting for and pinning in ends of brackets or erecting stand including waste coupling and brackets incl fixing of flush pipe and fixed in repair complete all as specified and directed. |
| 47 | S&F in repair, Vitreous China wash down water closet pan (pedestal pattern) white incl traps, seat and cover; flush pipe & connecting pipe, inlet and overflow pipes for flushing cistern incl jointing to socket of flushing rim and connecting pipe to union of flushing cistern complete all as specified. |
| 48 | S&F in repairs Vitreouschina squatting pan \"orissa\" pattern size 580x440mm white with integral foot rests and P or S trap, connecting to flushing pipe and trap and making good to the disturbed surfaces in CM 1:3 with finishing to match with the eixisting complete all as specified and directed. |
| 49 | S&F in repair health faucet brass chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 50 | S&F in repairs, 10litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete all as specified and directed. |
| 51 | S&F PVC connections 15mm size with PTMT nuts of length 450mm suitable for HOT & COLD water supply complete all as specified and directed. |
| 52 | S&F in repairs Brass CP shower rose 150mm size complete all as specified and directed. |
| 53 | S&F in repairTowel rail 600 mm long of brass fixed with and incl CP brass screws and wooden/plastic cleats. |
| 54 | Supply and fix in repairs two waybib cock/angle valve 15 mm bore long body chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 55 | S&F in repair PTMT cabinet mirror of size 555x450x124mm complete all as manufacures instruction complete all as specified and directed. |
| 56 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers complete all as specified and directed. |
| 57 | S & F 32mm bore high density polyethylene pipes or preture rating 6kgf per sq cm complete all as specified and directed. |
| 58 | S & F 32/40mm bore high density polyethylene waste pipes complete all as specified and directed. |
| 59 | S&F in repair SS grating doom 75mm diawith hole/without hole of CP complete all as specified and directed. |
| 60 | S&F in repair SS grating doom 110mmwith hole/without hole dia of CP complete all as specified and directed. |
| 61 | S&F in repair 40 mm dia waste coupling of brass chromium plated(half or full threaded) complete all as specified and directed. |
| 62 | S&F in repair 32 mm dia waste coupling of brass chromium plated (half or full threaded) complete all as specified and directed. |
| 63 | M&L in repair plastic EWC seat cover black/white, closed pattern with flat bottom and cover and mild steel CP or alu hinging device of approved size.complete all as specified and directed. |
| 64 | M&L for cleaning of CP fittings to remove hard water stains, limescale stains and stubborn soap scum by spraying over spot and rub with scrubber to spread followed by rinsing with water by using Tap & Shower cleaner.Make:- \"Clenza TS\" or Equivalent |
| 65 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy bracket guard and railing 60cm long complete all as specified and directed. |
| 66 | S&F Corner glass shelf assembly consisting of 5.5mm thickglass shelfwith aluminium alloy bracket guard and railing of approved size complete all as specified and directed. |
| 67 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 68 | S&F in repairs Jumper brass with rubber or leather washerfor 15 mm dia bib cock / stop cock brass complete all as specified and directed |
| 69 | S&F in repairs spindle brass for 15 mm dia CP Bib cock/ stop cock/pillar cock/ Mixer (any type)/concealed cock of any pattern complete all as specified and directed |
| 70 | Petty repairs to toilet floor, bathroom, kitchen, etc seepageincluding sunken portion treatment with water proofing compound/white cement including repair to floor trap,nahani trap , grating etccomplete all as specified and directed. |
| 71 | Petty repairs to leakage of bib taps, pillar cock, stop cock, PVC connection, waste pipes, float valves, angle valve, concealed valve, GI union joints of pipe, re-fixing of bottle trap, etc. by changing thePVC washers/Sheet washers,spindle or any other minor accessories etc complete all as specified and directed |
| 72 | Petty repair to highor low level flushing cistern by adjusting the float valve, leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush all as directed. |
| 73 | Petty repair to wall mixer,basin mixer,sink mixer etc including spindle, rubber washer etc all as directed |
| 74 | Petty repair to internal/external water inlet water pipe line including socket,elbow,nipple ,with repair to water blockage , pipe line leakageincluding concealed water tubing etc of any height using scaffolding,complete etc all as directed |
| 75 | Petty repair to renewing/matching glazed or ceramic coloured tiles in floors/walls in patches area not exceeding 0.50 Sqm including dismantling, removing and cleaning old tiles preparing beds and laying screeb bed in CM 1:4 setting, jointing and pointing new or old tiles complete all as specified and directed |
| 76 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed. |
| 77 | M&L Non Skid ceramic coloured tiles7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in whitecement mixed with pigment match the colour of tiles with and incl 15mm thick screed bed in CM 1:4.complete all as specified and directed. |
| 78 | M&L Non Skid ceramic coloured tiles7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in whitecement mixed with pigment match the colour of tiles with and incl 15mm thick screed bed in CM 1:4.complete all as specified and directed. |
| 79 | S&F Coloured Glazed ceramic tiles in vertical surfaces300x450mmx7mm/ 450x350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 80 | M&L Vitrified ceramic (dark/light shade) tiles 8-10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 81 | M&L Vitrified ceramic (dark/light shade) tiles 8-10 mm thick (square/rectangular) polished, area of each tiles exc 0.36 sqm but not exceeding 0.42sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 82 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 83 | M&L Granite(of any type)tiles 18-20mm thick as in skirting/dado/vertical surfaces/ lift openining, etc and similar works over and incl 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match incl cutting, polishing complete all as specified and directed. |
| 84 | M&L Granite(of any type)tiles 18-20mm thick as in floors/cooking platform, etc andsimilar works over and incl 15mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed. |
| 85 | M&L Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishingcomplete all as specified and as directed. |
| 86 | Demolition of cement oncrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 87 | M&L forHardcore of broken stone or boulders n exc 63mm deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 88 | M&L100 mm thick, Cement concrete 1:2:4,type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar workcomplete all as specified and directed. |
| 89 | M&L for 75mm thick, PCC 1:3:6, type C-2 using 40mm graded stone agg finished even and smooth without using extra cement as in plinth protection including removal of soil/dust/mud/wild vegetation on old surfaces where required during execution complete all as specified and directed. |
| 90 | M&L 25 mm thick, Cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate)as in floors finished even andsmooth using extra cement complete all as specified and directed. |
| 91 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each complete all as specified and directed. |
| 92 | S&F Factory made solid panel PVC door shutter 30mm (style) consisting of framemade out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I all as directed. |
| 93 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and directed. |
| 94 | S&F 100 mm long ,Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 95 | S&F 125 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed. |
| 96 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
