|
| 1 | Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as directed. |
| 2 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as directed. |
| 4 | Material and labour for providing precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face and set in CM (1:4), complete all as specified and directed. |
| 5 | Material and labour for, brickwork with subclass ‘B’ bricks, old size, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 6 | Supply and fix for, mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 7 | Materials and labour for, rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brick work or concrete surfaces on walls and finished even and smooth without using extra cement, complete all as specified and directed. |
| 8 | Material and labour for, preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat primer, complete all as specified and directed. |
| 9 | Material and labour for, cleaning of PVC water tank of capacity exc. 500 litres and not exc.1000 litres by using fiber brush to remove all dirts, sediments and then apply suitable dilute bleaching powder solution and finally cleaning with fresh water, complete all as directed. |
| 10 | Material and labour for, cleaning of PVC water tank of capacity exc. 1000 litres and not exc.5000 litres by using fiber brush to remove all dirts, sediments and then apply suitable dilute bleaching powder solution and finally cleaning with fresh water, complete all as directed. |
| 11 | Supply and fix for 15mm bore tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 12 | Supply and fix for 20mm bore tubes, \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 13 | Supply, hoisting and fixing in position of rotational moulded polyethylene water storage tanks double layers (cylindrical vertical with closed top) of 500 litres capacity with ISI marked and all as specified in IS12701 including 15mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and taking down existing water tank, complete all as specified in SSR Part I and directed. |
| 14 | Supply, hoisting and fixing in position of rotational moulded polyethylene water storage tanks double layers (cylindrical vertical with closed top) of 1000 litres capacity with ISI marked and all as specified in IS12701 including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and taking down existing water tank, complete all as specified in SSR Part I and directed. |
| 15 | Supply and fix in repair for, ball brass valves, 15mm bore dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 16 | Supply and fix in repair for, ball brass valves, 20mm bore dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 17 | Supply and fix in repair for, ball brass valves, 25mm bore dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 18 | Supply and fix in repair for, 15mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 19 | Supply and fix in repair for, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 20 | Supply and fix in repair for, 15mm dia bore unions brass to connect iron to polyethylene, complete all as specified and directed. and fixed |
| 21 | Supply and fix in repair for, 20mm dia bore unions brass to connect iron to polyethylene, complete all as specified and directed. and fixed |
| 22 | Supply and fix in repair for, 15mm bore dia nipple suitable for HDPE water tank (Minimum weight 15 mm-38gms), complete all as specified and directed. |
| 23 | Supply and fix in repair for, 20mm bore dia nipple suitable for HDPE water tank. (Minimum weight 20mm-45gms), complete all as specified and directed. |
| 24 | Material and labour for, removing all dirts, algae strain and cleaning with fiber brush from RCC roof and then applying dilute bleaching powder solution and finally cleaning with fresh water, complete all as specified and directed. |
| 25 | Material and labour for, removing plants including roots by dismantling brick work/ PCC using and including necessary scaffolding of any type and in any position or location i.e. roof, brick walls/ parapet walls/ chajjas/ fascias/ shaft/ roof near pipes etc. and applying acid solution for preventing the re-growthand making good to disturbed portion by providingcement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) and rendering plaster on surface in CM (1:3) (Size of disturbed portion 150mm x 150mm x 200mm), complete all as specified and directed. |
