|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group-C |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire |
| 3 | (b) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire |
| 4 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(a) 25 mm |
| 5 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(a) 5/6 A switch |
| 6 | (b) 15/16 A switch |
| 7 | (c) 3 pin 5/6 A socket outlet |
| 8 | (d) 6 pin 15/16 A socket outlet |
| 9 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (a) 1 or 2 Module (75mmX75mm) |
| 10 | (b) 3 module (100mmX75mm) |
| 11 | © 6 Module (200mmX75mm) |
| 12 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 13 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 14 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 16 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 4 way (4 + 12), Double door |
| 17 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required.(a) Single pole |
| 18 | (b) Triple pole and neutral |
| 19 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required |
| 20 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 35 sq. mm (32mm) |
| 21 | Providing, laying and fixing 40 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
| 22 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as required.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum ) |
| 23 | Dismentling of old surface / recessed wiring, switch board, electrical fittings etc as required. |
| 24 | Supplying and fixing 3.5 x 35 sqmm Power Cables, Solid Aluminum Conductor , XLPE Insulated, Cores Laid Up, PVCInnersheathed, Armoured Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments of in the existing RCC / HUME / METAL pipe as required. Make- Havells/ Gloster/ KEI/Polycab |
| 25 | Supplying , installation, testing and commissioing of 15 watt LED light, Colour temprature - 3000 K, Warm white, controlled Beam Angle, beam angel - 35 degree , with IP-54 rating protection, Body colour- balck, dimension - 80 mm x 45 mm, Alluminium material including interconnection etc. as required. Make- Philips/havells/passolite/CNC/Polycab. |
| 26 | Supplying , installation, testing and commissioing of 7 watt LED pillar light, Colour temprature - 3000 K, Warm white, controlled Beam Angle , with IP-65 rating protection, Body colour- Gun metal, Alluminium material including interconnection etc. as required. Make- Philips/havells/passolite/CNC/Polycab |
| 27 | Supplying , installation, testing and commissioing of 12 watt LED wall washer light, size 500 mm, Colour temprature - 3000 K, Warm white, controlled Beam Angle , with IP-65 rating protection, Body colour- Gun metal, Alluminium material including interconnection etc. as required. Make- Philips/havells/passolite/CNC/Polycab. |
| 28 | Supplying , installation, testing and commissioing of 3 watt LED projector light,Colour temprature - 3000 K, Warm white,Beam Angle-24 degree, with IP-66 rating protection, CRI - 80, operating on 230 volt 50 Hz, Lumen - 240,Body colour- Gun metal, Alluminium material, with hexcell Louvre, Cowl accessories including interconnection etc. as required. Make- Philips/havells/passolite /CNC/Polycab. |
| 29 | Supplying , installation, testing and commissioing of 6 watt LED projector light,Colour temprature - 3000 K, Warm white,Beam Angle-19 degree, with IP-66 rating protection, CRI - 80, operating on 230 volt 50 Hz, Lumen - 240,Body colour- Gun metal, Alluminium material, with hexcell Louvre accessories including interconnection etc. as required. Make- Philips/havells/passolite /CNC/Polycab. |
| 30 | Supply, installation, testing and commisionig of neon LED strip light ( 9 watt per meter ) with IP 65 protction, length - 50 m , Width - 12 mm, Height - 12 mm, 450 lumen per meter, Color temprature - 3000K, CRI- 80, no. of LED per meter - 120, Material - PVC diffuser, on the existing surface / wall have gauarantte min 2 year including connection etc. as required. Make- Philips/havells/passolite /CNC/Polycab. |
| 31 | Fabricating, providing and fixing of preminum quality 4 mm thick aluminium composite panel (ACP) sheet on existing surface wall with CP brass / stainless screw, adhesive or necessary arrangement and filling the gaps with wheather silicon sealants etc. complete as per architectural drawing and as per the direction of engineer -in- charge. |
| 32 | Fabricating, providing and fixing of stainless steel ( SS-304 ) 3 D letter ( english ) with gold plated, Thickness of metal - 0.80 mm, raising height of the letter - ( 1.25 - 1.5 inch ), Height of the letter should be of suitable / appropriate according to site requirement on the existing board / wall including all suitable arrangements. The hallow portion of the mettalic letter is to be covered with acrylic sheet as a male socket to place suitable quantity of LED lights to glow the letters , complete etc as required and as per the direction of engineer -in- charge. The letters will be as bellow and as approved by competent authority.[ BSF OFFICERS` INSTITUTE EASTERN COMMAND ][ BORDER SECURITY FORCE ][ EASTERN COMMAND ] |
| 33 | Fabricating, providing and fixing of stainless steel ( SS - 304 ) gold plated logo, Thickness of the metal -0.80 mm,on the existing board / wall with suitable arrangement, laid in required approved pattern with all complete etc as required and as per the direction of engineer -in- charge. The logo will have the particular original colour / shape and design in accordance with photographs which to be provided by the department and as approved by competent authority.On front side of the gate - 2 no. ( size - 20 `` x 20`` )On back side of the gate - 7 no. ( size - 20 `` x 20`` )On side wall -1 no. ( size - 30 `` x 30`` ) |
| 34 | Supplying , installation, testing and commissioning LED light fitting ( the guarantee shall be for at least 3 years on free replacement ). The SMPS shall be MOSFET / IGBT based and shall bear 2 years guarantee for free replacemnt and connection with appropriate size of copper wire and related acceossories etc. as required and as per the direction of engineer -in- charge. |
