|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 2 | Provide and laying reinforced cement concrete of M25 grade in beams , lintel beam,slab of any thickness and column as specified by engineer in charge. |
| 3 | Extra for centering and shuttering including strutting, propp etc and removal of form for edges of slabs and breaks in floors and walls, beams,columns, plinth beams, tie beams, girders etc. |
| 4 | Providing and fixing thermo mechanically treated bars of fe 550D or more |
| 5 | Drilling and fixing 8mm to 25mm rebars with hilti system and chemical complete etc as per direction of Engineer in charge/ consultant Steel to be paid separately |
| 6 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 7 | Chipping of unsound and weak plaster/concretefrom ceiling o f average thickness 25mm. |
| 8 | Providing and applying rust remover and zinc-chromate primer to exposed/rusted reinforced bars |
| 9 | Providing and applying premixfosroc polymer modified mortar over chipped concrete portion with a bond coat of cement and nitobond SBR as specified by engineer in charge. Avg. thickness 30mm |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,Glazed Vitrified high gloss tile size as specified by engineer in charge |
| 11 | Providingandlayingvitrified tiles on walls indifferentsizes(thicknesstobe specifiedbythemanufacturer)withwaterabsorptionlessthan0.08%and conforming to IS: 15622, of approved make, in all colours and shades, with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile as specified by engineer in charge (either antiskid/gloss) |
| 12 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by trolley of capacity 5 cum. ( payment shall be made for each trolley) |
| 13 | Providing and fixing stainless steel covers made of SS sheet of any thickness to the tank opening of required shape including welding , fixing complete etc. as per engineer in charge. |
| 14 | Providing and fixing of underwater pool lightIP68 rated waterproof 20W of required shape as specified by engineer in charge including necessary connection and wiring with 1.5sqmm cable upto length of 10m |
