Tender For Framework Agreement For Supply Of Steel Plates, Coils And Sheets In Q4 Of Fy 2025-26, Ghaziabad-Uttar Pradesh

TDR : 52891194

Tender Notice
BOQ

3 Days Left

Ghaziabad , Uttar Pradesh

Tender Brief : Tender For Framework Agreement For Supply Of Steel Plates, Coils And Sheets In Q4 Of Fy 2025-26

Document Fees
Refer document

EMD
Refer document

Tender Value
Refer document

Submission Date
22-12-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CR COIL 0.63X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.63 X 850 X Coil form [T X W X L] [mm]
2	CR COIL 0.63X700 IS 513 CR3 DD TDC:RTA:408:R04; 0.63 X 700 X Coil form [T X W X L] [mm]
3	CR COIL 0.63X500 IS 513 CR3 DD TDC:RTA:408:R04; 0.63 X 500 X Coil form [T X W X L] [mm]
4	GP Sheet 0.63 mm Class VIII IS 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
5	CR COIL 1.50 X 903 X Coil form - IS 513 CR3 DD GR.CR3 TDC:RTE:257; 1.5 X 903 X Coil form [T X W X L] [mm]
6	CR sheet 1.6 mm IS 513 CR2 - KLD; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
7	CR sheet 1.6 mm IS 513 CR2 - KLD; 1.6 X 1250 X 2500 (mm) [T x W x L]; 1.6 X W=1250 X L=2500 [T X W X L] [mm]
8	HR Sheets 1.6 mm IS 1079 Gr.HR2 SK/K; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
9	HR Sheet 2 mm IS 5986 Gr 205; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
10	CR sheet 2.0 mm IS 513 CR2 - KLD; 2 X 1250 X 2500 [T X W X L] [mm]
11	HR Sheets 2 mm IS 1079 Gr.HR2 SK/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
12	HR Sheet 2.5 mm IS 5986 Gr 205; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
13	HR Sheets 2.5 mm IS 1079 Gr.HR2 SK/K; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
14	CR sheet 3.0 mm IS 513 CR2 KLD: 3 x W=1250 x L=2500 ; T (mm) x W (mm) x L (mm); 3 X W=1250 X L=2500 [T X W X L] [mm]
15	HR Sheet 3.15 mm IS 5986 Gr 205; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
16	HR Sheets 3.15 mm IS 1079 Gr.HR1 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
17	HR Sheets 3.15 mm IS 1079 Gr.HR2 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
18	HR Sheet 4.0mm IS 5986 Gr 205; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
19	HR Sheets 4 mm IS 1079 Gr.HR2 SK/K; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
20	Pl 5 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
21	Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
22	CQ Pl 5 mm IS 3502; 5 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
23	Pl 5 mm IS2062 E250 Gr BR/K ; TDC:301 ; 5 (T) x 1500 ≤ W ≤ 1800 (W) x (6300-12000) (L) [mm]; 5 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
24	Pl 6 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
25	Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
26	CQ Pl 6 mm IS 3502; 6 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
27	Pl 6 mm IS2062 E250 Gr BR/K ; TDC:301 ; 6 (T) x 2500 (W) x (6300-12000) (L) [mm]; 6 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
28	Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 (T) x 2000 (W) x (6300-12000) (L) mm; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
29	Pl 7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 7 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
30	Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
31	CQ Pl 8 mm IS 3502; 8 X 900 ≤ W ≤1250 X L ≤ 6300 [T X W X L] [mm]
32	Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 (T) x 2000 (W) x (6300-12000) (L) mm; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
33	Pl 8 mm IS2062 E250 Gr BR/K TDC:386; 8 (T) x 2500 (W) x (6300-12000) (L) [mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
34	Pl 8 mm IS 2062 E250Br/K TDC:6:386,; 8 X 2500 X 12000 [T X W X L] [mm]
35	Pl 10 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 10 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
36	Pl 10 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 10 X 2500 X L= 6300 [T X W X L] [mm]
37	Pl 10 mm IS 2062 E 250 Gr A/BR/SK/K TDC 301 Rev 12; 10 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
38	Pl 10 mm IS 2062 E250Br/K TDC 301 , width 2000mm, length 12000 mm; 10 X 2000 X 12000 [T X W X L] [mm]
39	Pl 10 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A578 Level B, width 3200 mm, length 8000 mm; 10 X W = 3200 X L = 8000 [T X W X L] [mm]
40	Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
41	Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm; 10 X 2000 X 12000 [T X W X L] [mm]
42	Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 10000mm; 10 X 2500 X 10000 [T X W X L] [mm]
43	Pl 10 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03; 10 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
44	Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 (T) x 2000 (W) x (6300-12000) (L) mm; 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
45	Plate 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 (T) x 2000 (W) x 9000 (L) mm; 10 X 2000 X 9000 [T X W X L] [mm]
46	Pl 12 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 12 X 2500 X L= 6300 [T X W X L] [mm]
47	Pl 12 mm IS 2062 E 350 Gr BR/K TDC 301 Rev 12; 12 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
48	Pl 12 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
49	Pl 12.7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12 X W= 3700 X L= 5800 [T X W X L] [mm]
50	Pl 12 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 12 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
51	Pl 12 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 12 X 2500 X 12000 [T X W X L] [mm]
52	Pl 12 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03; 12 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
53	Pl 12 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12 (T) x 2000 (W) x (6300-12000) (L) mm; 12 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
54	PL 12MM A516 GR. 70; TDC: AA10403 REV 01 + SUPPLEMENTRY RQUIREMENTS: IMPACT TEST (S5 + SL. NO. 1 & 2 OF ANNEXURE- 1)+BEND TEST (SL. NO. 5 OF ANNEXURE-1) .; 12 X 3000 X 8000< L < 12000 [T X W X L] [mm] AA10403 (LATEST REVISION)
55	Pl 12.7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12.7 X 3750 X 5850 [T X W X L] [mm]
56	Pl 16 mm IS 2062 E 350 Gr BR/K TDC 301 Rev 12; 16 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
57	Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
58	Pl 16 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 16 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
59	Pl 16 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 16 X 2500 X 12000 [T X W X L] [mm]
60	Pl 16 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03; 16 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
61	Pl 16 mm IS2062 E250 Gr BR/K TDC:301; 16 (T) x 2000 (W) x (6300-12000) (L) [mm]; 16 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
62	Pl 16 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 16 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 16 X 2500 X L= 6300 [T X W X L] [mm]
63	Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2000 (W) x (6300-12000) (L) mm; 16 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
64	Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
65	PL 16 MM A516 GRADE-70- Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 16 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm] AA10403 (LATEST REVISION)
66	PL 16 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 16 x 2500 x 5700 [T X W X L] [mm]; 16 X 2500 X 5700 [T X W X L] [mm] AA10403 (LATEST REVISION)
67	PLATE 18.0 MM; IS2062E350 GR B0; TDC:6:386:REV:03: 18 x 2500 x (10000-12000) (T x W x L) mm; 18 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
68	PLATE-20 IS2062 E250BR TDC:301 Rev 12; 20 X 2500 X 12650 [T X W X L] [mm]
69	PI 20 mm IS2062 E350 Gr BR TDC 301 Rev 12; 20 X 2000 ≤ W ≤ 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
70	Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 20 X 2000 ≤ W ≤ 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
71	Pl 20 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 20 X 2000 ≤ W ≤ 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
72	Pl 20 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 20 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 20 X 2500 X L= 6300 [T X W X L] [mm]
73	Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 20 (T) x 2000 (W) x (6300-12000) (L) mm; 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
74	Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
75	Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 20 x 2500 x 7100 [T X W X L] [mm]; 20 X 2500 X 7100 [T X W X L] [mm]
76	PLATE 20 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 20 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm] AA10404 (LATEST REVISION)
77	PL 20 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 20 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
78	PLATE 22 MM; IS2062 E250GRBr; TDC:6:386:REV:03: 22 x 2500 x (10000-12000) (T x W x L) mm; 22 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
79	PLATE 22 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 22 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm] AA10404 (LATEST REVISION)
80	PL 22 MM A515 GRADE-70; 22 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm] AA10404 (LATEST REVISION)
81	PL 22 MM A515 GRADE-70; AA10404; 22 X 3000 X 10000 [T X W X L] [mm] AA10404 (LATEST REVISION)
82	Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12; 25 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
83	Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435; 25 X 2500 X 8000< L < 12500 [T X W X L] [mm]
84	PI 25 mm IS2062 E350 Gr BR TDC 301 Rev 12; 25 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
85	Pl 25 mm IS2062 E350 Gr BR/K TDC:301; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
86	HR PLATE 25X2800X12000-IS 2062 GR.B; 25 X 2800 X 12000 [T X W X L] [mm] TDC:6:386 Rev 03
87	Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 25 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
88	Pl 25 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 25 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 25 X 2500 X L= 6300 [T X W X L] [mm]
89	PL.25 x 2500 x 12000 is 2062 E250 Gr. Br. TDC 6 386 Rev.03; 25 X 2500 X 12000 [T X W X L] [mm]
90	Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 25 (T) x 2500 (W) x (6300-12000) (L) mm; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
91	PL25 E250GR-BR/K TDC:6:386; 25X3100X12000 ; T (mm) x W (mm) x L (mm); 25 X 3100 X 12000 [T X W X L] [mm]
92	PL 25 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 25 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
93	PLT BQ 25 MM (SA516 GR70) TDC: AA10403 +IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 25 x 2500 x 13000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 25 X 2500 X 13000 [T X W X L] [mm] AA10403 (LATEST REVISION)
94	PI 28 mm IS2062 E350 Gr BR TDC 301 Rev 12; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
95	Pl 28 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
96	Pl 28 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
97	PLT BQ 28 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 28 x 2500 x 13000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 28 X 2500 X 13000 [T X W X L] [mm] AA10403 (LATEST REVISION)
98	PLATE 30 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 30 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm] AA10404 (LATEST REVISION)
99	PL 30 mm IS 2002 GRADE-2; TDC: AA10401; W = 2500 ; L= 8000; [Thickness, Length (L) & Width (W) are in mm]; 30 X 2500 X 8000 [T X W X L] [mm] AA10401 (LATEST REVISION)
100	Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 32 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
101	Pl 32 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435,width 2500 mm, length 12500 mm; 32 X W = 2500 X L = 12500 [T X W X L] [mm]
102	PI 32 mm IS2062 E350 Gr BR TDC 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
103	Pl 32 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
104	PI 32 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 32 X W= 2500 X L= 12000 [T X W X L] [mm]
105	Pl 32 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 32 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 32 X 2500 X L= 6300 [T X W X L] [mm]
106	PL32 E250GR-BR/K TDC:6:386; 32X3200X6500 ; T (mm) x W (mm) x L (mm); 32 X 3200 X 6500 [T X W X L] [mm]
107	PL32 E250GR-BR/K TDC:6:386; 32X2650X11100 ; T (mm) x W (mm) x L (mm); 32 X 2650 X 11100 [T X W X L] [mm]
108	PL32 E250GR-BR/K TDC:6:386; 32X2550X10000; T (mm) x W (mm) x L (mm); 32 X 2550 X 10000 [T X W X L] [mm]
109	PL 32 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 32 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
110	PLT BQ 32MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 32 X 2500 X (10000≤ L ≤ 12000); [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 32 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm] AA10403 (LATEST REVISION)
111	PLATE 35 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 35 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm] AA10404 (LATEST REVISION)
112	Pl 36 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 36 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
113	PI 36 mm IS2062 E350 Gr BR/K TDC 301 Rev 12; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
114	Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03 + ULTRASONIC TESTING AS PER ASTM A435; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
115	Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
116	PL36 E250GR-BR/K TDC:6:386; 36X3200X11000 ; T (mm) x W (mm) x L (mm); 36 X 3200 X 11000 [T X W X L] [mm]
117	PL 36 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 36 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
118	Pl 40 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
119	Pl 40 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 2500mm, length 12000mm; 40 X W=2500 X L =12000 [T X W X L] [mm]
120	PI 40 mm IS2062 E350 Gr BR TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
121	Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [mm]
122	Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
123	Pl 40 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 40 X 2500 X 12000 [T X W X L] [mm]
124	Pl 40 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
125	PL40 E250GR-BR/K TDC:6:386; 40X3200X11000 ; T (mm) x W (mm) x L (mm); 40 X 3200 X 11000 [T X W X L] [mm]
126	PLATE 40 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 40 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm] AA10404 (LATEST REVISION)
127	PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 40 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
128	PLT BQ 40 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 40 x 2500 x 9000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 40 X 2500 X 9000 [T X W X L] [mm] AA10403 (LATEST REVISION)
129	Pl 45 mm IS2062 E250 Gr Br.K TDC 301 Rev 12;45 x 2500 x 6300-12000; ( T x W x L) mm; 45 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
130	Pl 45 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
131	Pl 45 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 45 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
132	Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2000 - 2500 mm, length 8000- 12000 mm; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
133	Pl 50 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
134	Pl 50 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 50 X 2500 X 12000 [T X W X L] [mm]
135	PI 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
136	Pl 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [mm]
137	PL 50 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 50 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
138	PLATE 55 MM A515 Gr.70; TDC: AA10404-05 + Supplementary requirements: UT (S12); 55 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm] AA10404 (LATEST REVISION)
139	Pl 56 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
140	PL 56 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 56 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm] AA10403 (LATEST REVISION)
141	PL 56 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 56 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
142	PI 60 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 60 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
143	Pl 63 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
144	Pl 63 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm] TDC:6:386 Rev 03
145	PL 63 IS 2062 E250GR-BR/K TDC:301, 63 X 2150 X 12000 [T X W X L] [mm]; 63 X 2150 X 12000 [T X W X L] [mm]
146	PL 63 IS 2062 E250GR-BR/K, TDC:301, 63 X 1875 X 9000 [T X W X L] [mm]; 63 X 1875 X 9000 [T X W X L] [mm]
147	PLATE 63.0 MM; IS2062E250 GR Br.; TDC:6:386:REV:03: 63 x 2500 x (10000-12000) (T x W x L) mm; 63 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
148	PL 63 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) are in mm]; 63 X 3600 X 7800 [T X W X L] [mm] AA10401 (LATEST REVISION)
149	PL 63 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 63 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm] AA10403 (LATEST REVISION)
150	PL 63 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 63 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
151	Pl 70 mm IS 2062 E 250 Gr A/BR/SK/K; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
152	PL 70 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 70 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
153	PI 80 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 80 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
154	Pl 80 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;80 mm 2500 mm 7000 mm : T X W X L (mm; 80 X 2500 X 7000 [T X W X L] [mm]
155	PL 80 IS 2062 E250GR-BR/K, TDC:301, 80 X 2500 X 7650 [T X W X L] [mm]; 80 X 2500 X 7650 [T X W X L] [mm]
156	Pl 80 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 80 x 2850 x 10700 [T X W X L] [mm]; 80 X 2850 X 10700 [T X W X L] [mm]
157	PL 80 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 80 X 2500 X 6300 [T X W X L] [mm] AA10403 (LATEST REVISION)
158	Pl 90 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
159	PL 90 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 90 X 2500 X 5000 [T X W X L] [mm] AA10403 (LATEST REVISION)
160	Pl 100 mm IS 2062 E 250 Gr A/BR/SK/K; 100 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm] TDC:301 Rev 12
161	PI 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 100 X W= 4400 X L= 4600 [T X W X L] [mm]
162	Pl 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 100 x 2500 x 6000 [T X W X L] [mm]; 100 X 2500 X 6000 [T X W X L] [mm]
163	PL 100 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) are in mm]; 100 X 2200 X 4800 [T X W X L] [mm] AA10401 (LATEST REVISION)
164	PL 100 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1); 100 X 2200 X 10000 [T X W X L] [mm] AA10403 (LATEST REVISION)
165	Pl 110 mm IS 2062 E 250 Gr A/BR/SK/K; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
166	PL 110 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 110 X 2500 X 6000 [T X W X L] [mm] AA10403 (LATEST REVISION)
167	Pl 115 mm IS 2062 E 250 Gr A/BR/SK/K; 115 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm] TDC:301 Rev 12
168	PL 140 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) are in mm; 140 X 2000 X 10500 [T X W X L] [mm] AA10401 (LATEST REVISION)
169	Pl 190 mm IS2062 E350 Gr C TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + UT: ASTM A435, 190 mm 2250 mm 6300 mm T X W X L (mm); 190 X 2250 X 6300 [T X W X L] [mm]

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Machinery and Tools Tenders

Manufacturing Machinery Tenders

Machine Tools Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Framework Agreement For Supply Of Steel Plates, Coils And Sheets In Q4 Of Fy 2025-26, Ghaziabad-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Framework Agreement For Supply Of Steel Plates, Coils And Sheets In Q4 Of Fy 2025-26, Ghaziabad-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us