|
| 1 | Taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified. |
| 2 | Taking down chowkatswith shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) |
| 3 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site |
| 4 | Taking down shutters refixing in same openingbut area exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules ofelasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed . |
| 6 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (i)WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 7 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: (i)WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 8 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf.(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 150 mm long - 2 nos per leaf.(c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 nos. per leaf |
| 9 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges with necessary full body threaded star headed counter sunk S.S screws including S&F wire cloth complete all as per direction of Engineer- In- Charge including supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 nos. per leaf. (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf. (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf. (f) Stainless Steel (304 Grade) (natural finish) wire cloth fixing as per manufacture |
| 10 | Supply & fixing factory made UPVC window or ventilator side hung/top hung (glazed and gauge both) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) including all fittings like hinges, tower blot, peg stay, locking arrangement etc., making arrangement for fixing of hardware all as per manufacture instruction and refer Drg No BTD-890/R complete all as specified and directed.Note : The unit rate quoted by contractor includes cost of glass & wire mesh (5.5mm thick sheet glass ordinary quality for window and 4mm thick figured glass pin head type for ventilator, Stainless steel 304 Grade, natural finish, wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm) and includes all other connected accessories. Net Opening will be measured for payment purpose.. Provision of all other items as shown on Drgs & Cutting holes of suitable depth in wall for inserting lugs etc including making gooddismantled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate and cement mortar (1:3) shall be demand to be include. |
| 11 | Supply & fixing factory made UPVC sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) with or without provision of opening for cooler as directed including all fittings, steel roller system, locking arrangement etc., making arrangement for fixing of hardware, glass, wiremesh, grill etc all as per manufacture instruction and Drg No BTD-890/R and as directed.Note : The unit rate quoted by contractor includes cost of glass & wire mesh (5.5mm thick sheet glass ordinary quality& Stainless steel 304 Grade, natural finish, wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm) and includes all other connected accessories. Net Opening will be measured for payment purpose. Provision of all other items as shown on Drgs & Cutting holes of suitable depth in wall for inserting lugs etc including making gooddismantled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate and cement mortar (1:3) shall be demand to be include |
| 12 | M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge. |
| 13 | S&F in repair Stainless stee wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40mm |
| 14 | Hacking out old broken glass (any size,thickness,quality or description from metal frame including punching or drilling out old glazing pins/spring clipscomplete all as specified & directed by Engineer -in-charge. |
| 15 | S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane |
| 16 | S & F 3 mm thick Figured glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified. |
| 17 | M&L preparing surface of wood and woodbased surface old on any description not other wise described over 10cm with or grith and applying one coat of synthetic enamel paint over a coat of pink primer. |
| 18 | M & L providing one coats of synthetic enamel paint over old surface and a coat of red oxide primer on steel surfaces including preparation of surface of any description not exceeding 10 cm width or girth all as specified. |
| 19 | Taking down aluminium door shutter , Refixing in the same opening after tightening of members ,refixing of glass panes and rubber bids inluding adjusting of old hydraulic door closer complete. |
| 20 | S&F anodised aluminium Powder coated frame , shutter and connected accessories for doors , window , ventilators any type (openable/slidig)able and partition wall with one or more rebate including joiing cleat glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fittingfor fixing etc including aluminium sliding window push lock . complete all as specified. |
| 21 | S&F anodised aluminiumPowder coated grill weight not less than 1.50 Kg/Sqm in window , doorsor ventilator includingfixing material complete all as specified and as directed by Engineer in charge. |
| 22 | S&F sheet glass 4.8mm thick ordinary quality and fixed in alum section including solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturers in squares not exceeding 0.50 sqm in each pane |
| 23 | S&F in repairs aluminium (die cast) body,door closer hydraulically regulated designation No. 3 , universal type , suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed. |
| 24 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, including making good existing floor after installation of floor spring. |
| 25 | M&L in repairs AluminiumMotrice lock4 levers and 75mm size for aluminium doors |
| 26 | S&F for 150mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring,fixed in floor. |
| 27 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. |
| 28 | M & Lfor rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement. |
| 29 | M & Lfor rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement. |
| 30 | M&L rendering5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement. |
| 31 | M&L for two coat of cement base paint over a coat of alkali resistant cement primeron newly plastered surface including preparation of undecorated surface complete all as specified and as directed |
| 32 | M& L for two coat of oil bound distemper on new plasterd wall surfaces of walls paint over 3mm thick wall care putty includingnecessary preparation of surfaces all as specified. |
| 33 | Complete removal of existing treatment and preparing old surface of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed and specified.Make : Asian Paints/Berger/Nerolac |
| 34 | M&L for preperationof old wooden surface and applying two coat of synthetic enamel paintcomplete all as specified and directed by Engineer -in -charge. |
| 35 | Complete removal of existing treatment of any type/description from external/internal/ceilings surfaces/walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed. |
| 36 | Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 37 | Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION)/ Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) . |
| 38 | Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade)@ 5 sq.m/litre/2 coats by using spray gun to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (APEX)/ Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL) . |
| 39 | M & L for preparation of surfaces and applying one coats of oil bound distemperwith roller on old treated surface of wall etc complete all as specified and directed. |
| 40 | M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling. |
| 41 | M & L Preparation of newly plastered wall surfaces and applying threecoats of white wash including preparation . |
| 42 | M & L one coat of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge . |
| 43 | M & L one coat of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge . |
| 44 | S&F 25 mm dia drapery curtain rod with decorative end knobs complete with brackets and fixed to walls complete all as sp & dir . |
| 45 | Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices. |
| 46 | S&F glazed ceramic colouredtiles joint free 350x250x7mm/450x350x7mm square or rectanguleras on walls etc set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over 10mm thick rendering in CM 1:4 |
| 47 | M&L 16-18mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and likein cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 48 | M & L in repair providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick one decorative lamination sheet consisting of carcass 18mm thick PVC Sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets SS screws etc.The panels shall be fabricated using adhesive and screws where ever required. all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as drawing and specification approved by Eng-in-Charge. |
| 49 | M & L in repair cubboard with prelaminated Block board one side with decorative choice laminations exterior grade 18-19mmincluding 2 No\"s for each shutter 100mm extuded,brass handles,fabricated type polished for cabinet shutters allas specified by Engr-in-charge |
| 50 | S&F Magnetic catcher fixed in with nut,screw washer complete all as specified and directed by Eng-in Charge. |
| 51 | S & F for solid PVC frame (single revated) of size 60mm x 30mm made out of solid pvc foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK Screws complete all as specified and directed by Eng-in -charge. |
| 52 | S & F Continuous (piano) hinges, brass, bright finish or electro galvanised all as specified. |
| 53 | M & L for Solid PVC Wall lining consisting of 5 mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing and including dismantaling boarding, any discription fixed in any position |
| 54 | M & L for 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 55 | Material and labour forwater proofing treatment to RCC sunken slab and adjoining vertical slab (at other than ground floor) applying one method from following applications complete all as specified and as directed by GE :-Method 1 : (A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp proof 2K, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand). Making Gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 Cement : 1 Polymer : 4 Sand). The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications. (B)Bore Packing: All the borehole gaps between concrete surface and PVC pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – Smart Care GP Grout having dual shrinkage compensation property. Before the bore packing, surface of the PVC pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (C) Apply12-15mm plaster on slab and vertical surface admixed with Smart Care Vitalia Neo @200ml per bag of cement before treatment. Method 2:- (A) Supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm with a paint brush over existing slabsurface and adjoining vertical surface. The Polyester reinforced coated net of 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k. After removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola on surrounding wall’s junction and seal the vertical walls. In case of core cutting on the surface, the joint is seal with non-shrink grout. (B) The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. (C) Apply 12-15mm water proof plaster on slab and vertical surface admixed with Dr Fixit pidiproof LW+ @200ml per bag of cement before treatment. |
| 56 | Material and labour for removing loose disturbed or disintegrated old concrete surfaces of RCC beam, ceiling, slab, column, lintel, pardi, railing etc. cleaning thoroughly exposed reinforcement by sand blasting using suitable pump as directed by GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti-corrosive paint to the exposed reinforcement, supply and fixing welded wire mesh of size 100x100mm of 3mm dia wire and weight not less than 1.37 kg/Sqm and binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting as per IS 6433 in cement mortar (1:3) average thickness 30mm and thereafter 10mm thick rendering in cement mortar (1:3) including mixing of liquid WPC in mortar @ as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement to match the existing surface including removing rubbish material from building and thrown in low lying empty area at any distance out side MD land complete all as specified and as directed by Engineer-in-Charge. Make: M/s Sika India Pvt Ltd/ Fosroc/pidilite. Note :- (i) The finished level of the surfaces shall be matched with the existing surface. (ii) Provision of additional reinforcement steel (other than welded wire mesh) in case required and ordered shall be measured and paid separately |
| 57 | Disconnecting , Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulated pipes etc for existing tanks of any capacity, including writing the date of cleaning and refixing the tank in position. |
