|
| 1 | Taking down chowkhats or frame n.exc 1.5 sqmtr with shutters (without taking off shutters from frames), complete all as specified and directed. |
| 2 | Dismantling floor, hearth orwall tiling including cementmortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 3 | Demolition of stone, brick/PCC block masonry work built in cement mortar complete allas directed. |
| 4 | Dismantling stone slabs and tiles laid bedded and pointed in any mortar of anydescription or thickness infloors, aprons etc. |
| 5 | Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as directed. |
| 6 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, unframed work |
| 7 | Dismantlingtimber in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section |
| 8 | Dismantling plain or corrugated steel sheeting any thickness, complete all as specified and directed. |
| 9 | Dismantling of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets. |
| 10 | Taking down chowkhats or frame exc 1.5 sqmtrbut n.exc 4 sq m(without taking off shutters from frames), complete all as specified and directed. |
| 11 | S & F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm widthstuck inside with solvent cement for stilesand plain colour PVC sheets for top rail,lock rail & bottom rail on either side & asgap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheetbeading, and joined together with solventcement, suppling & fixing in the frame atsite as per specification & drawing. |
| 12 | M&L for Providingprecast cement concrete type C1 1:3:6 (20mm graded stone aggregate)solid building blocks or slabs exc 10cm thick (with plain or interlocking joints as directed)setting in mortar 1:6 ,complete, in walls |
| 13 | Supplied only liquid WPC |
| 14 | M & L for Second class hard-wood in scantlings, clean sawn timber unframed and fixed. |
| 15 | Solid PVC Door Frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheetreinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing. |
| 16 | Supply and fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie |
| 17 | S&FPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 18 | M&L for 6mm thick plywood, (5 Nos of ply)grade BWR, type BB, fixed with nailsto timber framework. In wall partitions. |
| 19 | M&L for 4mm thick plywood, (3 Nos of ply) grade BWR, type BB, fixed with nailsto timber frameworkin ceiling |
| 20 | M&L for 40 mm thick cement concrete 1:2:4 type B1 ( using 20 mm graded stone aggregate) as in floor /base. |
| 21 | M&L for Virified Ceramic Dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchinclscreed bed with CM (1:6) 15mm thick for laying floor tiles complete all as specified and directed. |
| 22 | M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 cm/30cm x 30 cm x 25cm thick, set and jointed and pointed in neat cement slurry with grey cement and no pigment in floors. |
| 23 | M&L Rendering 15mm thick CM (1:4) onother thanfair facesof brick workor concrete surfaces of wall ,finshing the surfaceeven and smooth without using extra cement complete. |
| 24 | M&L for prep ofnewly plastered surfaces of wallsand applying two coats of cement base paint complete all as specified and as directed complete. |
| 25 | S & F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane. |
| 26 | Hacking out old broken glass (any hickness, size, quality )from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones |
| 27 | M&L for prepration of old wooden surfaces exc.10cm in width or girthand applying one coat of synthetic enamel paint complete all as specified and directed. |
| 28 | M&L for prepration of new wooden surfaces exc.10cm in width or girthand applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 29 | Preparing of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 30 | S&F in repair 15mm dia fancy typebib tap cast copper alloycapston head chromium plated screwed downfor iron pipe completed.. |
| 31 | S&F in repair 15 mm diafancy type pillar tap cast copper alloy with capstan head , chorium plated screwed down high pressure with orwithout lettered hot or cold withlong screwed shanks andfly nuts scrwedfor iron pipe and fixed. complete all as directed.. |
| 32 | S & F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 33 | S F in repair Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flushpipe and waste pipe) |
| 34 | S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 35 | S & F in repairs Vitreous Cliina wash basin, wlhite, flat back, size 550x400 irun (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand |
| 36 | S&Fin repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 37 | M & L for PCC 1:4:8 Type D-2 (using 40mm graded aggr) asin foundations,filling and mass concrete. |
| 38 | M&Lsecond class hard wood plain fillets.square, rectangular or triangular in section, clean sawn, sectional area exc 13 sq cm and n exc 25 sq cm secured with nails |
| 39 | S&F 2ndclass HW plain solid straight chowkhats and frame wrought framed rebated on the soild rounded or chamfered put together with glue pinned at joints, complete all as specified and directed. |
| 40 | S & F30 mm thick flush shutters,solid core construction with block board core and plywood face panel, commercial type on both sides, complete all as specified and directed. |
| 41 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed. |
| 42 | Supply and fix Aluminium anodized barrel tower bolts of extruded section, 125 mm long, complete all as specified and directed. |
| 43 | Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed |
| 44 | Supply and fix mild steel butt hinges, medium weight, cold rolled 100 mm size , complete all as specified and directed. |
| 45 | Supply and fix mild steel butt hinges, medium weight, cold rolled 125 mm size , complete all as specified and directed. |
| 46 | Supply and fix Aluminium handles, cast type, anodized, 125 mm size , complete all as specified and directed. |
| 47 | Supply and fix Aluminium handles, cast type, anodized, 150 mm size , complete all as specified and directed. |
| 48 | Taking down carefully aluminium point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors, etc. all as directed.including taking down fittings such as switches, ceiling roses, regulators, sockets,lamp holders, light fittings etc. |
| 49 | M&L for point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing capping of sizenot less than 20mm on surface of wall including provn of PVC box/modular metal flush box of suitable sizefor mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all asspecified and directed.One light/fan point controlled by one switch one way 5 Amps |
| 50 | All as per Sl Item no.49 but withOne 2/3 pin socket outlet 5Amps on independent board |
| 51 | All as per Sl Item no.49 but withOne 3 pin socket outlet 5 Amps on the same board with other switches |
| 52 | All as per item No 49 above but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm |
| 53 | S&Fswitch piano flush type single pole one way switch5 Amps |
| 54 | S&F Switch Piano Flush button single pole one way 15/16 Amp. |
| 55 | S&F socket outlet 2 in 1,3 pin & 2 pin, 5/6 Amp, 240 volt. |
| 56 | S&F socket outlet 2 in 1 ,3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt. |
| 57 | S&F ceiling rose surface bakelite3 terminals 65x50mm all as directed. |
| 58 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 59 | S&F LED Lamp 9W B22 Type all as specified and directed. |
| 60 | S&F in replacement of switch piano flush type single pole one way 5 Amps complete all as specified & directed. |
| 61 | S&F in replacement ofswitch socket combination 2 in 1, 3 pin 5 Amps flush type complete all as specified & directed. |
| 62 | S&F in replacement of Switch socket combination multipurpose 5/16 Amps, 5 in 1,4 / 5 hole flush type complete all as specified & directed. |
| 63 | S&F in repair Lamp holder angle type made ofPVC/Polycarbonate with back plate. |
| 64 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size including taking down old unserviceable light fitting complete. |
| 65 | Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection including taking down old unserviceble light fitting complte. |
| 66 | S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (Metallic) typeincluding taking down old Distribution Board and MCBs all as specified and directed . |
| 67 | All as per item No 66 above but4 way SPN with 200 Amps rated bus bar , 240 volts |
| 68 | S&F in replacement MCB Single pole, 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series |
| 69 | S&F in replacement MCB Single pole & neutral 240volts 20 to 32 Amps, 10KA rupturing capacity, C series |
| 70 | S&F in replacement MCB triplepole415 volts 25 to 63 Amps 10KA rupturing capacity, C series. |
| 71 | M&L for sub main wiring withtwo single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 6 sq mm FRLSH drawn throughsuitable size of non-metallic PVC rigid conduit with6 sqmm copper conductor cable as earth conductor of 6.0 sq mm FRLSH and conduit accessories fixed up in surfaceincluding connecting upincluding taking down unserviceable sub main wiring complete all as specified and directed. |
| 72 | Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion including dismantling of old unserviceable earthing all as specified and shown on plate No 3 of SSR Part-I 2009 |
| 73 | S&Fin replacement of Single pole and neutral Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps, 240 Volts,AC,50 HZ, completete all as directed and specified, including taking down old unserviceable plug socket and offering for credit. |
| 74 | S&F in replacement ofswitch socket combination 3 pin 5 Amps flush type complete all as specified & directed. |
| 75 | S&F in replacement of Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified & directed. |
| 76 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 Core nominal cross section inservice connections including taking down old unserviceable cable complete. |
| 77 | All as per Sl Item no.37 but 76 Sqmm 2 Core. |
