|
| 1 | (SCOPE 1)L 2516 RENEWAL OF CP 800\"S DISCHARGE LINE FROMLP ROOM TO HP ROOMThis job involves remove the damaged portion of discharge line of CP 800 and 820 in LP room , the same to be renewed and fit back in the line with Gaskets in position and properly secure with necessary U clamps and Supports. All lines to be primed and painted before installation.Lines to be pressure tested at 200 Psi. All bolts and nuts to be used for fitment are to be S.S 316 L quality with S.S washer\"s on both sides and Vendor to supply all nut and bolts used.Vendor to quote for complete scope for the lines listed below. |
| 2 | Renewal of 12\" MS Sch80 line per metre length |
| 3 | Renewal of 12\"MS Sch80 standard Flange 12 hole |
| 4 | Renewal of 12\" MS Sch80 Bend 90 Deg |
| 5 | Renewal of Concentric Reducer 12\"8\" Sch 80 CS |
| 6 | Vendor to quote for renewal of 6\" MS Sch80 lineper metre length |
| 7 | Renewal of 6\"MS Sch80 standard Flange |
| 8 | Renewal of 6\" MS Sch80 Bend 90 Deg |
| 9 | Renewal of 6\" MS Sch80 Bend 45 Deg |
| 10 | Renewal of Concentric Reducer 6\"x5\" Sch 80 CS |
| 11 | Renewal of Concentric Reducer 6\"x4\" Sch 80 CS |
| 12 | Vendor to quote for renewal of 8\" MS Sch80 line per metre length |
| 13 | Renewal of 8\"MS Sch 80 standard flange 8 hole |
| 14 | Renewal of Concentric Reducer 8\"x6\" Sch 80 CS |
| 15 | Vendor to quote for renewal of 4\" MS Sch80 line(As per the scope of L 2516) per metre length |
| 16 | Renewal of 5\"MS Sch80 standard Flange |
| 17 | Renewal of 4\"MS Sch80 standard Flange |
| 18 | Renewal of 6 \" 120 Sch Deck Penetration |
| 19 | (SCOPE 2)L 2519 RENEWAL OF PADDLE TANK SUCTION LINE ( TWIN DECK TO LP ROOM )This job scope involves remove the damaged portion of Paddle tank suction line , the same to be renewed and fit back in the line with Gaskets in position and properly secure with necessary U clamps and Supports.All lines to be primed and painted before installation.Lines to be pressure tested at 200 Psi. All bolts and nuts to be used for fitment are to be S.S 316 L quality with S.S washer\"s on both sides and Vendor to supply all nut and bolts used.Vendor to quote complete scope of work including materials . |
| 20 | Renewal of 8\" MS SCH 80 Pipe |
| 21 | Renewal of 8\" MS SCH 80 Elbow 90 Deg |
| 22 | Renewal of 8\" MS SCH 80 Elbow 45 Deg |
| 23 | Renewal of 8\" MS SCH 80 Standard Flange |
| 24 | Renewal of 8\" Bulkhead Penetration Sch 120 |
| 25 | L.2520RENEWAL OF PADDLE TANK FILLING LINEThis job scope involves remove the damaged portion of Paddle tank filling line , the same to be renewed and fit back in the line with Gaskets in position and properly secure with necessary U clamps and supports. All lines to be primed and painted before installation.Lines to be pressure tested at 200 Psi. All bolts and nuts to be used for fitment are to be SS 316 L quality with S.S washer\"s on both sides.all nut - bolts and washers to be Vendor supply.Vendor to quote complete scope of work including materials . |
| 26 | Vendor to quote for renewal of 8\" MS Sch80 line(As per the scope of L 2520) per metre length |
| 27 | Renewal of 8\" MS SCH 80 Elbow 90 Deg |
| 28 | Renewal of8\" MS SCH 80 Elbow 45 Deg |
| 29 | Renewal of8\" MS SCH 80 Standard Flange 8 hole |
| 30 | Vendor to quote for renewal of 6\" MS Sch80 line(As per the scope of L 2520) per metre length |
| 31 | Renewal of6\" MS SCH 80 Elbow 90 Deg |
| 32 | Renewal of 6\" MS SCH 80 Elbow 45 Deg |
| 33 | Renewal of 6\" MS SCH 80 Standard Flange 8 hole |
| 34 | Renewal of reducer 6\" x 5\" |
| 35 | Vendor to quote for renewal of 4\" MS Sch80 line(As per the scope of L 2520) per metre length |
| 36 | Renewal of 4\" MS SCH 80 Elbow 90 Deg |
| 37 | 4\" MS SCH 80 Standard Flange 8 hole |
| 38 | BD 2508RENEWAL OF LEVEL INDICATOR SS TUBING |
| 39 | This job involes renewal of paddle tanks and blender\"s level indicator\"s SS 316L tubings with new as existed. SS Fittings of same to be renewed with new. Approx. Material required: 1/2\" SS 316 L Tubing: 22 MtrsVendor to quote complete scope of work including materialsper metre length of line renewed |
| 40 | (SCOPE 3)BD 2509RENEWAL OF DIESEL AND FRESH WATER LINES TO PADDLE TANKThis job scope involvesremove the damaged portion of Diesel line and fresh water line to paddle tank\"s.Ball valves of same to replace with Butterfly valves as per ship staff.The same to be renewed and fit back in the line with Gaskets in position and properly secure the same.All lines to be primed and painted before installation.All bolts and nuts to be used for fitment are to be S.S 316 L quality with S.S washer\"s on both sides and Vendor to supply all nut and bolts used.Lines to be pressure tested at 200 psi.Vendor to quote for the complete scope of work for the below listed items. |
| 41 | Vendor to quote for renewal of 3\" MS SCH 80 line (asper the scope BD 2020) per metre length renewed. |
| 42 | Renewal of 3\" MS SCH 80 Bend |
| 43 | Renewal of 3 \" CS Flange |
| 44 | Vendor to quote for renewal of 2\" MS SCH 80 line (asper the scope BD 2020) per metre length renewed. |
| 45 | Renewal of MS SCH 80 Bend 2 \" |
| 46 | Renewal of2\" MS SCH 80 Flange |
| 47 | Renewal of 2\" MS SCH 80 Blind flange |
| 48 | Vendor to quote for renewal of 1\" MS SCH 80 line (asper the scope BD 2020) per metre length renewed. |
| 49 | Renewal of 1\" MS SCH 80 Bend |
| 50 | Renewal of 1\"MS SCH 80 Flange |
| 51 | Renewal of 1\" SS Ball Valve |
| 52 | BR 2502BURNER SEA WATER SUPPLY LINES RENEWAL |
| 53 | This job involves removal, fabrication and fitment of Burner sea water lines to sprinkler assemblies wherever damaged.1\" Sprinkler adapters to be replaced with new. 02 no\"s 3\" Rubber hoses (600 Psi rating) with king nipple and flange assemblies and 01 no 2\" rubber hose (600 Psi rating) with FIG 206 M/F union NPT assembly as existed.Secure same with Dixon clamps at both end\"s. Post fabrication fit back in the line with Gaskets in position and properly secure the same.All lines to be primed and painted before installation.All bolts and nuts to be used for fitment are to be S.S 316 L quality with S.S washer\"s on both sides and Vendor to supply all nut and bolts used.lines to be pressure tested at 200 psi..Vendor to quote complete scope of work including materials .Approx. materials required:-3\" MS SCH 40 Pipe : 100 Mtr, 3\" MS SCH 80 flange: 57 No\"s , 3\" MS SCH 40 bend:23 No\"s, 2.5\" MS SCH 40 Flange: 02 No\"s, 1\" Adapter with sprikler\"s : 30 No\"s, 3\" wire brided Rubber hose(600 Psi Rating, 07 Mtr length) : 02 No\"s, 2\" Rubber Air hose (600 Psi rating,8.0 Mtr length, NPT fitting crimped as existed): 01 no, 2\" MS Fig 206 M/F weco union: 04 No\"s |
