|
| 1 | Dismantling tiles in floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(below or above ground level) |
| 3 | M& L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 |
| 4 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed (tiles) |
| 5 | M&L for fixing of vitereous china wash basin flat back, size 550 x 400mm including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe., including down pipe,Fixed in repairs, by removing the existing one. |
| 6 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 7 | Supply andfixing of Fancy Pillar taps,15mm dia cast copper alloy,with captstan heads, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed, Fixed in repairs, by removing the existing one. |
| 8 | S&F of 450mm long PVC connections 15mm size with PTMT nuts of length 450mm . |
| 9 | M&L for fixing vitereous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot-rest, Fixed in repairs (excluding flushing cistern flush pipe & waste pipe) complete including provision of white cement concrete bedding, by removing the existing one. |
| 10 | S & F Vitreous China, semi-pedestal pattern (Anglo-Indian Type), Wash down water closet (Pedestal pattern), complete including provision of white cement concrete bedding, by removing the existing one. |
| 11 | S & F of PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets with 10ltrs capscity(Make Parryware, jaguar, hindware) |
| 12 | Supply & fixing of flush pipe of polyethy-lene of low or high density or PVC, 32mm dia , for low level cistern. |
| 13 | S&F of 15mm dia stop valve and cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, or in UPVC fittings |
| 14 | Supply of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 15 | Supply andfixing of ,Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated 15mm and fixed |
| 16 | S & F Solid PVC Door Frame of size 50mmX47mm made out of5mm plain colour PVC sheet reinforced with M.S. Square tube as per specification & drawing. |
| 17 | S & f PVC solid panel door shutter 30mm thick having a PVC sheet strip of 20mm width struck inside with solvent cement for stilesand plain color PVC sheet for top rail,lock rail & bottom rail and joined together with solvent cement in the frame at site as per specification |
| 18 | Material & Labour for fixing of Butt hinges 75mm, extruded brass with brass/bronze hinge pin, bright polished and fixed, type, extruded brass with brass/bronze hinge type B-12. including tower bolts and handles. |
| 19 | Material & Labour for fixing of Butt hinges 100mm, extruded brass with brass/bronze hinge pin, bright polished and fixed, type, extruded brass with brass/bronze hinge type B-12. including tower bolts and handles. |
| 20 | M&L for aluminium anodised, barrel tower bolts 75mm length of extruded section and fixed. |
| 21 | M&L for fixing of aluminium handles, 150mm length cast type, anodised. |
| 22 | S & F of Unplasticised PVC pipes of pressure rating 10 kgf/cm fixed complete to walls, ceilings or in or in floors etc., any type of pipebore in 25mm thickness |
| 23 | S & F of Unplasticiscd PVC pipe (40 mm diameter) of pressure rating 10 kgf/cm2 fixing on walls , ceilings , or floors (Make: Finolex, Trubore, Ashirvadh) |
| 24 | Taking up or down steel tubing and connections, with bore in 15mm, 20mm,25mm ,40mm, 50mm including cleaning for refixing or removal to store |
| 25 | M&L for fixing of 75mm dia PVC SWR pipe single socket in any length with rubber ring joint fixed to walls. |
| 26 | M&L for fixing of 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to trenches or in floors. |
| 27 | M&L for fixing of PVC (SWR) floor trap, plain with grating including jointing with sovent cement diameter of outlet 75mm dia |
| 28 | Supply & fixing of PVC (SWR) bends any radius 110 mm dia complete for all works. |
| 29 | S&F of PVC (SWR) junction single (Single T) equal or unequal 75mm. |
| 30 | S&F of PVC (SWR) junction single (Single T) equal or unequal 110mm. |
| 31 | S&F ofPVC(SWR) bends75 mm any radius if provided with access door |
| 32 | S&F ofPVC(SWR) bends110mm any radius if provided with access door |
| 33 | Supply & fixing of 2nd class hardwood plain,solid,straight chowkats and frames wrought,framed rebated on the solid rounded or chamfererd,put together with glue pinned at joints (50% of 172774.30 SSR2020) |
| 34 | Supply & fixing flush shutters , solid core con-structions, with block board core and plywoodface panels , commercial type on both sides.Thickness in 30 mm. |
| 35 | S&F of Vitreous china urinal partition white of size 310x700mm |
| 36 | S& F of Vitreous China Urinal, Half stall type, white, Fixed in repairs (excluding flushing cistern,flush pipe) with down pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinalback in cement, fixing automatic flushing cistern with brackets flush pipe grating and Union for discharge pipe,Fixed in repairs, by removing the existing one. |
| 37 | M&L for laying non skid ceramic tiles colo-ured7 to 8mm thick(square/ rectangular) area of each tile exceeding 0.06 sq.m butn.exc 0.11 sq.min floors etc. set and jointed in neat cement slurry with combination of waterproofing compound and pointed in white or coloured cement to match using Epoxy grout with spacers of 3mm |
| 38 | S&F of Glazed ceramic tiles in vertical surfaces polished, area of each tilessurfaces etc. Setand jointed in neat cement slurryand pointed in white or coloured cement to match with light shade |
| 39 | M&L for laying of screed bed/bedding layer of 20mm thick using CM1:6 mix for laying vitrified tiles |
| 40 | Dubbing out average 15mm thick on irregular face of walls with cement plaster 1:4 |
| 41 | M&L for fixing waste fittings of brass chromium plated for glazed wash basins etc. with long screwed shanks and fly nuts,flange and bedded in red lead cement & white cement |
| 42 | Forming jambs with cement mortar 1:4 to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete. |
| 43 | M&L for rendering 10mm thick cement plaster on wallsfair faces of concrete surfaces or brick work in CM 1:4 mix (internal & external) |
| 44 | Material & Labour for laying 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded aggregate for flooring. |
| 45 | Material & labour for applyingone coat of distember oil emulsion on old internal wall surfaceincluding prepration of old wall surfaces shall include brooming down ,steel wire brushing ,scrapping down ,smoke soot,moulds, moss and efflorescent salts and trading oil and greasy spots etc and all as directed by EIC. |
| 46 | Material & labour for applying one coat of distember oil emulsion on old ceilingsurfaceshall include brooming down,steel wire brushing ,scrapping downsmoke soot,moulds, moss and efflorescent salts and trading oil and greasy spots etc and all as directed by EIC. |
| 47 | M & L for preparing of oldsurfaces and applying Two coat synthetic enamel on wooden surfaces of any description, over 10cm in width or girth,not otherwise described (Make Asian, Nerolac) |
| 48 | S & FAnodised aluminium ventilator shutters, Expansion hold fasteners 12.5mm dia,weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified with side hung type, powder coating of any colour (Thickness or powder coating not less than 50 micron). |
| 49 | S & F Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane (4mm) thickness |
| 50 | Taking down Chowkhats or frames for doors & windows not exc. 1.5 sq.m each and removal to store. |
| 51 | Taking down shutters n exc 1 Sq.m & not exc 2 sq.meach and removal to store. |
