|
| 1 | Demolition of brickwork or stone/boulder masonry/PCC block masonry,built in cement mortar or cement lime morter including all quoins, arches, pillars,etc but excluding ashlar facing, dressed stone work and precast concrete articles including disposal of unserviceable of materials complete all as specified and directed |
| 2 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n exc. 15cm thick (Below or above ground level) complete including disposal of unserviceable of materialsall as specified and directed |
| 3 | Demolition of reinforcement cementconcrete exc 15 cm thickness for roofs, floors (other than ground floors), beams, staircases, and similar suspended work including removal of all demolished material form site complete all as specified and directed |
| 4 | M&L for TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 5 | Ditto As per above item 4 but in 6 to 8 mm dia asstirrups complete all as specified |
| 6 | Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide for rough finished surface complete all as specified and directed |
| 7 | Use and waste Formwork of Square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface complete all as specified and directed. |
| 8 | Use and waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified and directed. |
| 9 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surface complete all as specified and directed |
| 10 | M & L for Reinforced cement concrete Grade M-30 (design Mix ) using 20mm graded stone aggregate) as inBeams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 11 | M & L for Reinforced cement concrete Grade M-30 (design Mix ) using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed |
| 12 | M & L for Reinforced cement concrete Grade M-30 (design Mix ) using 20mm graded stone aggregate) as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 13 | M&L for pre cast cement concrete solid block masonry exc 10 cm in width using PCC (1:3:6) type C-1(using 20mm graded aggregate) set in CM (1:6) complete all as specified and directed |
| 14 | M&L for rendering 10mm thick in CM 1:6 onfair faces of brick work or concrete surfaces of wall and finished fair and even (without using extra cement) complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick in CM 1:4 onfair faces of brick work or concrete surfaces of wall and finished fair and even (without using extra cement) complete all as specified and directed. |
| 16 | M&L for PreparingNewly plastered surfaces of walls and applying Two coat ofdistemper oil emulsiononwallsincluding Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed |
| 17 | M&L for Preparationof newlyplastered surfaceof wallandapplying two coatsof cementbasepaint over a coat of primer complete all as specified and directed |
| 18 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W(Gde- E-250) quality-B complete all as specified and directed |
| 19 | M&L for Mild steel plates (Plain or chequrred , channels, square cut or notchedordinary and with reivited bolted or welded attachment Fe-410-W (Gde E-250 quality-B) complete all as specified and directed |
| 20 | M&L for preparation of new steel surface of any description over 10 cm in width or grith and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed. |
| 21 | S&F Pre-painted galvalume aluminum zinc coating AZ 150 GSM GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed |
| 22 | S&F Pre-painted galvalume aluminum zinc coating AZ 150 GSM GI based plain steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding/valley gutter fixed with self tapping screws as specified complete all as specified and directed |
| 23 | S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates hook and pintle hinges: large hasps and staples chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 24 | S&F non asbestos fibre cement building board 6mm thick ceiling fixed with size of grid 605X605mm GI frame work for seamless ceiling comprising of GI perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.with Hangers 6 mm dia. G.I as required to proper fixed complete all as specified and directed |
| 25 | M&L for 25mm thick cement concrete1:2:4type B0 using 12.5 mm graded stoneaggregateas Subbasecomplete all as specifiedand directed |
| 26 | M&L vitrified ,coloured and printedtiles of size 600 mmx600 mm x 9 to 10 mm thick as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 27 | Ditto but on dado/skirting etc over and including backing coat 10mm thick in CM (1:4) and pointed in whcite or coloured cement to match complete all as specified and directed |
| 28 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and directed |
| 29 | M&L for Glazed coloured Ceramic tiles in verticle surface 450 x 300 x 7mm thick. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 30 | S&Fanodised aluminium frame for doors, windows, ventilators with or more rebates including joining cleat for fixing etc. complete all as specified and directed |
| 31 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed |
| 32 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed |
| 33 | M & L foraluminum grill of design No DG-104, 7.5mm thick sections of decogrill or of equivalent approved makewith 1 mm thick \"F\" sections of suitable size complete all as specified and directed by Engg in Charge. |
| 34 | M&L for 18 to 20 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete |
| 35 | S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed |
| 36 | S&F 4mm thickness Sheet glass,ordinary quality and glazing with rubber gaskut in square exc 0.5 sq. m in each pane complete all as specified and directed |
| 37 | S&F 4mm thickness Figured glass, pin head type and glazing in squares n exc 0.5 sq. m in each pane complete all as specified and directed |
| 38 | S&F aluminium anodised Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 39 | S&F in for 150mm PVC (SWR) pipes single socketed in any length with rubber ring joints including bends etc as required at sitefixed to wallscomplete all as specified and as directed. |
| 40 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,with and including WPC Frames/ Chowkhat of size 45 x 70 mm,3 no 100mm stainless steel butt hinges |
| 41 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed |
| 42 | S&F Floor door stopper 150mm over all length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 43 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 |
| 44 | S&F aluminium anodised, 100mm long barrel tower bolts of extruded section. |
| 45 | S&F aluminium alloy anodised handle, febricated type 100mm long. |
| 46 | S&F for vitreous China wash down water closet pan EWC (pedestal pattern), white, (including flushing cistern 10 ltr and flush pipe), with \"P\" or \"S\" trap and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, including connection to drain (or outgoing pipe) and to flushing pipe, etc.complete all as specified. |
| 47 | S&F PVC connections 15mm size with PTMT nuts and washersfor 600mm long pipe complete all as specified and directed. |
| 48 | S&F Bib taps of 15mm dia chromium plated cast copper alloy of fancy typescrewed down for iron pipecomplete all as specified and directed.. |
| 49 | S&F Health faucet (ABS Body) mild steel chromium plated suaitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified. |
| 50 | S&F wash hand basin vitreous china white flat back of size 450 X 300mm with CP pillar tap of 15 mm dia cast copper alloy fancy type swan neck including brackets, PVC waste pipe and coupling of suitable size complete all as specified and directed.. |
| 51 | S&F Stop valves15mm dia cast copper alloy fancy type , chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.. |
| 52 | S&F for 6mm thick bevelled edge mirror of selected quality glass,with chromium plated brass screws and cup washers complete all as specified and directed.. |
| 53 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.. |
| 54 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.. |
| 55 | M&L for Cast iron floor trap (100 mm) with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.. |
| 56 | S&F Soap dish holder, approximate size 160 x 160 x 90mm,any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.. |
| 57 | S&F PVC (SWR) pipes 75 mm dia, single socketed, in any length with rubber rings joints, laid in trenches or in floors complete all as specified and directed. |
| 58 | S&F PVC (SWR) pipes 110 mm dia, single socketed, in any length with rubber rings joints, laid in trenches or in floors complete all as specified and directed. |
| 59 | S&F 75 mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 60 | S&F 110 mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 61 | S&F PVC (SWR) vent cowl 75mm dia all as specified and directed. |
| 62 | S&F PVC (SWR) vent cowl 110mm dia all as specified and directed. |
| 63 | M&L 15mm nominal bore dia tubes, medium grade, galvanished with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed |
| 64 | M&L 20mm nominal bore dia tubes, medium grade, galvanished with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed |
| 65 | S&F rotational moulded poly-ethylene water storage tanks (ISI marked) (cylinderical vertical with closed top) 1000 litres capacity in white colour, triple layer hoisted and fixed in position including 25 mm dia Ball brass valves complete all as specified and directed. |
| 66 | S&F for of 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in down stream complete all as specified and directed. |
| 67 | M&L for Granite (of any type) 18-20 mm thick work (table rubbed and polished) in window-cills with round moulding etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 68 | Material and labour for 18mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face complete all as specified and as directed. |
| 69 | M&L for point wiring complete with 1.5 sqmm single core, PVC insulated, unsheathed, FRLS, 1100V grade multistranded copper conductor cable, ISI marked, drawn through and including medium grade rigid PVC casing & caping as One light/Fan point controlled by one one way switch with cable of size 1.5 sqmm complete all as specified and directed. |
| 70 | All as per item No-69 and above but one 3 pin socket outlet, 5 mps on the same board with other switches, with cables 1.5sqmm complete all as specified and directed. |
| 71 | All as per item No-69 and above but one 3 pin socket outlet, 5 mps on the independent board with other switches, with cables 1.5sqmm complete all as specified and directed. |
| 72 | As per item No. 69 but cable of size 2.5 sqmm for one 5/15 Amps socket outlet complete all as specified and directed. |
| 73 | S&F for switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin ) 6/16 Amps, 230V, AC complete all as specified and directed. |
| 74 | S&F for switch piano, flush type single pole one way 5/6 amps complete all as specified and directed. |
| 75 | S&F for ceiling rose surface bakelite 65x50mm two to three terminal complete all as specified and directed. |
| 76 | S&F for LED light fitting 1X20 watts, 220 V AC decorative box type with driver, holder including LED tubelight conneting upto three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 77 | S&F for Lamp holder, PVC/polycaronate type with cord grip cap sitable for pendant fittings complete all as specified and directed. |
| 78 | S&F for Ceilingfans complete with bldades, down rods, electronic regulator and accessories, 230 volts, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor(BLDC) complete all as specified and directed. |
| 79 | S&F for exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 80 | S&F for sheet metal enclosure for DB\"s Double door, single pole and neutral, 8 way including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall complete all as specified and directed. |
| 81 | S&F for SPN 40-63 Amps , 240 volts,, 10 KA, C\" curve complete with connection, testing and commissioning complete all as specified and directed. |
| 82 | S&F for 240 Volts, 10KA \"C\" curve miniture circuit breaker (MCB) of single pole and neutral current carring capcity 6 to 32 Amps, in the MCB DB complte with connection testing and commissioning complete all as specified and directed. |
| 83 | S&F for 240 Volts, 10KA \"B\" curve miniture circuit breaker (MCB) of single pole and neutral current carring capcity 6 to 32 Amps, in the MCB DB complte with connection testing and commissioning complete all as specified and directed. |
| 84 | S&F for LEDLuminaire 600mm X 600mm, 35/36 watts, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceilling including connecting up with drive three core flexible copper conductorcases of suitable size complete all as specified and directed. |
| 85 | M&L for sub main wiring with 2 runs of 4.0 sqmm PVC insulated unseathed copper cable multistandard 1100 volts. FRLS RM 301 grade with drawn in PVC casing caping and one run of 4 sqmm PVC insulated copper cable as earth continuity conductorin drawn in PVC casing capping all as specified and directed. Note: 3 runs of 4 sqmm copper cable and 1 run of PVC casingn capping will be measured as one unit i.e RM complete all as specified and directed. |
| 86 | M&L for Earthing complete with galvanized steel earth electrolde 60cmX60cmX6mm buried dirrectly in ground vertically not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5mtr below ground level connected to galvanized earth lead wire 4sqmm dia upto 7.5m long by means of bolts, nuts, check nuts and washer etc made of galvanized iron including 50 mm bore GI pipe medium grade up 7.5 m length all as shown on electrical plate No.3 of SSR Pt I and as specified and indicated and testing on completion including earth work and excavation in any type of soil, PCC chamber, RCC slab with cast iron frame, funnel with water pipe GI 20 mm medium grade, wire mesh and lugs complete all as specified and directedNote:(i) The unit rate shall be include for protection pipe, GI water pipe, wire mesh, funnel, excavation, RCC pit cover, PCC chamber pit, test point, galvanized earth wire 4 sqmm dia from top of earth plate up to 7.5meters above ground level and if GI protection pipe is less than 7.5 meters, no price adjustment shall be made. PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fitting junction etc shall be deemed to be included in the unit rate. (iii) RCC pit thick reinforced with XPM (weighing not less than 4KG/Sqm in liew of cast iron cover.all as specified and directed. |
| 87 | S&F for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sqmm,2 core as service wire complete all as specified and directed. |
| 88 | S&F for Gun- metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore dia complete all as specified and directed. |
| 89 | S&F for Tubes, medium grade, Galvanised with all fittings of size 25 mm dia laid in trenches/floor/wall complete all as specified and directed. |
