|
| 1 | Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed |
| 2 | All as per item No 01 abovebutexc. 1.5 sq.m but n exc 4 sqmeachcomplete all as specified and directed |
| 3 | Taking down shutters of any description not exc. 1.00 sq. m each complete all as specified and directed |
| 4 | All as per item No 3 abovebutexc 1.0 sq. m but n exc 2.0 sqmeachcomplete all as specified and directed |
| 5 | S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm includinguding 3.50 mm thick designer glasslouvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed. |
| 6 | S&F aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 7 | S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150 mm handles 2 Nos in each shutter, 200 mm tower bolt 01 No in each shutters , 100 mm 03 Nos stainless steel hinges in each shutter, anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 8 | S&F 4mm thick figured glass, pinhead type in squares exc 0.5 sqm each pane fixed with aluminum frame work complete all as directed |
| 9 | S&F4mm thick Sheet plain glass, selected quality, in squares exc. 0.5 sq. m eachpane glass, each pane fixed with aluminum frame work complete all as directed |
| 10 | S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum,all as specified and directed.NOTE: During fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 11 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 12 | S&F for second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats including all as specified and directed. |
| 13 | S&F for 30 mm thick flush shutterssolid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets/lipping 30X6mm all around the shutters complete all as specified and directed. |
| 14 | M&L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,ater/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: 1.stainless steel butt hinges and necessary S Sscrews shall be paid separately 2. All screws shall be self tappingand length of Screw not less than 50 mm. ) |
| 16 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed. |
| 17 | S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame including necessary wooden beading/clip complete all as specified & directed. |
| 18 | S &F in repair aluminium wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium beading fixed on aluminium windows frame including taking down alumimium windows frame and refix at same opening, complete all as specified & directed. |
| 19 | S&F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any height of Bldg including necessary scaffolding etc complete complete all as specified and directed |
| 20 | Ditto- all as per item No 19 above but figured/frosted glass complete complete all as specified and directed |
| 21 | S&F Stainless steel butt hinges medium weight 100mm all as specified and directed.NOTE :- All screws shall be self tapping chrome plated and length ofscrew not less 38 mm . |
| 22 | S&F 100mm butt hinges medium weight cold rolled mild steel fixed with chowkats complete all as specified and directed. |
| 23 | S&F 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete complete all as specified and directed |
| 24 | S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kgISI Marked complete. |
| 25 | S&F 250 mm long Stainless steel sliding door bolts, plate type,bright bolt not less than 12mm dia with and including a mini of 6 bolts and nuts, four on bolt plate and two on staple plate (selected quality as approved ) complete all as specified and directed |
| 26 | S&F 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete complete all as specified and directed |
| 27 | S&F stainless steel tower Bolt of 200 mm long ( selected quality as approved )fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 28 | S&F 125mm long aluminum anodised barrel tower bolts of extruded section and fixed with door complete all as specifed and directed. |
| 29 | S&F stainless steel handle of 150 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 30 | S&F 150 mm long aluminum handles, fabricated type anodised and fixed with door complete all as specifed and directed. |
| 31 | S&F for floor door stopper of brass body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed. |
| 32 | S&F in repair drapery curtain rod of stainless steel 20mm/25mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete complete all as specified and directed |
| 33 | S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw compete complete all as specified and directed |
| 34 | S&F in repair stainless steel hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge. |
| 35 | S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixedas approved by GE suitable for cup board etc. includinguding taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 36 | S&F auto closing hinges with stainless steel screws complete all as directed |
| 37 | S & F continuous (piano) hinges, stainless steel,width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed. |
| 38 | S&F stainless steel handle of 75 mm size (modular selected quality of design as approved) fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 39 | S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed to door complete all as specified |
| 40 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0m height of Bldg complete all as directed. |
| 41 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 14.0m height of Bldg complete complete all as specified and directed |
| 42 | M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cementupto 12.0mtr height of bldg complete complete all as specified and directed |
| 43 | M&L for 10mm thick cement plaster in CM 1:3 on concrete ceiling surfaces finishing the surfaces even and smooth without using extra cement with any height of Bldg complete complete all as specified and directed |
| 44 | M&L for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in foundations, sub base of floor,filling and mass concrete including demolition of existing complete all as directed |
| 45 | M&L Brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortarcomplete all as specified and directed. |
| 46 | M&L for pre-cast cement concrete block masonry with solid blocks exc 10 cm in width, 1:3:6 mix type C-1, (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as directed |
| 47 | M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height. |
| 48 | M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper of any tint over a coat of primer over a thin layer(1 mm to 1.5 mm) of wall care putty upto 12.0mtr height of Bldg complete complete all as specified and directed |
| 49 | M&L for preparation of new plastered ceiling surfaces and applying two coats ofOil bound distemperover a coat of primer upto 12.0mtr height of Bldg complete complete all as specified and directed |
| 50 | M&L for preparation of old wall surfaces and applying two coats of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height. |
| 51 | M&L for preparation of old surfaces and applying two coats of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer tomangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height. |
| 52 | M&L for preparation of old decorated surfaces and applying one coat of weather proof exterior emulsion paint (\"APEX\" brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height. |
| 53 | M&L for applying two coats of Oil bound distemper over a coat of alkali resistance primer over a layer of wall care putty (1 to 1.5 mm thick) on wall surfaces including complete removal of existing treatment all as specified and directed. |
| 54 | M&L for applying two coats of Oil bound distemper over a coat of alkali resistance primer over a layer of wall care putty (1 to 1.5 mm thick) on ceiling surfaces including complete removal of existing treatmentall as specified and directed. |
| 55 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices, plaster by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper on old surfaces of walls all as specified and directed. |
| 56 | -Ditto- all as per item srl No 55 above but applying two coats. |
| 57 | M&L for preparation of old plastered or unplastered ceiling surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper all as specified and directed. |
| 58 | M&L for preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 59 | M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed. |
| 60 | M&L for preparation of old surfaces of wood and applyingone coat of synthetic enamel paint on ceiling surface complete all as specified and as directed. |
| 61 | M&L for preparation of old wooden/wood base surfaces of wall/floor and applyingtwo coat of malamine polish with spray guns, compressor etc complete till fine glossy surface is obtained, including filling of cracks and holes etc complete all as specified and as directed. |
| 62 | M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc.such as , CEMISTIK PU 50 heavy Duty warerproofing coatingor equivalent complete all as per manufacturer instruction as directed. |
| 63 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as directed |
| 64 | M&L for non-skid coloured ceramictiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete complete all as specified and directed |
| 65 | M&L for non-skid coloured ceramictiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 with desire border work complete complete all as specified and directed |
| 66 | -Ditto- all as per item No.65 item above but skirting/dado (area n exc 0.09 sqm) on vertical surfaces including 10mm thick backing coat cement plaster in CM 1:4 complete all as directed. |
| 67 | M&L for glazed ceramic coloured tiles of size 300x450x7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM1:4 complete all as directed. |
| 68 | M&L coloured vitrified double charged tiles 8-10mm thick (square/ rectangular) area of each tile n.exc 0.80 sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6of any description complete complete all as specified and directed |
| 69 | -Ditto- all as per item no. 68 item above but skirting/dado (area n exc 0.09 sqm) on vertical surfaces including 10mm thick backing coat cement plaster in CM 1:4 complete all as directed. |
| 70 | M&L for 7 to 8 mm thick textured tiles exc 0.06 sqm but not exc. 0.18 sqm in size of each tile as exterior wall claddingfor decorative purposes set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of stone and including 10mm thick backing coat in CM 1:4 and dismantling of existing wall cladding complete all as directed. |
| 71 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub basecomplete all as specified and as directed |
| 72 | M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, confoRMing to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.(ii) Sand cushionig measured and paid sepratly. |
| 73 | Ditto- all as per items no 72 but except Paver block. |
| 74 | M&L for crushed sand for cushioning under paver blocks all as specified and directed. |
| 75 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolition of existing as directed. |
| 76 | M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles with grey cement and pigment and area of each tile exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6)for laying floor finishes including dismantling of existingcomplete all as specified and as directed. |
| 77 | M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing in cement mortar and making good to disturbed surface including dismantling of existing stone slab complete all as specified and directed. |
| 78 | M&Lfor Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platfoRM,WHB platfoRM and like set in cement mortar (1:4) including pointing in white or coloured cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling of existing stone slab complete all as directed. |
| 79 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed. |
| 80 | M&L for Machine cut kota stone slab flooring 18-20mm thick over in riser of steps, skirting, dado and pillar laid over 10mm thick packing of plaster in CM 1:4 and jointed with cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slab complete all as specified and directed |
| 81 | M&L Bees-wax polishing on old marble/stone surfaces of any description, width or girth including cleaning the stone complete complete all as specified and directed |
| 82 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cementincluding demolition existing concrete and rubbish off the premises complete all as specified and directed |
| 83 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. |
| 84 | -Ditto- all as per Srl item No 83 here-in-before, but fixing only |
| 85 | S&F for 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed |
| 86 | ditto all as per Srl item No 85 here-in-before, but fixing only |
| 87 | M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed |
| 88 | S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete complete all as specified and directed |
| 89 | S&FPVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as specified and directed |
| 90 | S&F rotational moulded polyethylenewater storage tank 3 layer black/white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic balland 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. |
| 91 | -Ditto- all as per item No 90 here in before but 1000 Ltrs capacity complete all as specified and directed. |
| 92 | S&F for repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), includinglong ARM P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and directed |
| 93 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern) EWC white, includinguding trap, connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete complete all as specified and directed |
| 94 | S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including CP brass waste coupling and PVC waste pipe, 32mm dia,pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete complete all as specified and directed |
| 95 | S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (Anglo indian type) complete all as specified and directed. |
| 96 | S&F in repair 32mm dia PVC waste pipe for WHB/kitchen sink of length 1.0m including fixing the same complete all as specified and directed Make:Prayag or ISI marked |
| 97 | S&F in repair 40mm dia PVC waste pipe for kitchen sink upto1.0m including coupling including fixing the same complete all as specified and directed Make:Prayag or ISI marked |
| 98 | S&F in repair 600mm x 450mm looking mirror of selected quality glass of thickness not less than 5.50mm,with PVC frame and 4mm thick MDF board back fixed to wall with suitable SS screws complete complete all as specified and directed |
| 99 | S&F in repair cabinet mirror plastic bodyfor toilet of size 350mm x 450mm with 4mm thick looking mirror complete complete all as specified and directedMake : Prayag/Polytuff. |
| 100 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm complete all as specified and directed |
| 101 | S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore, ISI marked complete all as specified and as directed. |
| 102 | S&F in repair glass shelf of size 500x125mm(drop) with chomium plated railing fixed with and including chromium plated bracket complete complete all as specified and directedMake:Prayag Cat Pt No BEA-45G or equivalent |
| 103 | S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and including chromium plated bracket complete complete all as specified and directedMake:Prayag Cat Pt No BEA-44G or equivalent |
| 104 | S&F in repair hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Prayag Cat Pt No GBEA-907 or equivalent |
| 105 | S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Prayag Cat Pt No GBA-135 or equivalent |
| 106 | S & F in repair Brass Chromium plated towel rail 600mm long fixed with brass/stainless screws complete all as specified and directed. Make: Prayag Cat Pt No GBA-131 or equivalent |
| 107 | S & F in repair Brass Chromium plated towel rack fixed with brass/stainless screws complete all as specified and directed. Make: Prayag Cat Pt No GBA-133 or equivalent |
| 108 | S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrulecomplete complete all as specified and directed Make: Prayag Cat Pt No 9306N or equivalent |
| 109 | S&F in repairs washing machine cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrulecomplete complete all as specified and directed Make:Prayag/Jaquar or equivalent |
| 110 | S&F in repairs pillartaps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete complete all as specified and directed Make : Prayag Cat Pt No 6514 or equivalent |
| 111 | S&F in repairs pillar tapssuitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete complete all as specified and directed Make:Prayag Cat Pt No 6802 or equivalent |
| 112 | S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flangessuitable for fixing with GI pipes 15mm dia complete all as specified and as directed.Make :Prayag Cat Pt No 7875-N or equivalent |
| 113 | S&F in repair 15 mm bore angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete complete all as specified and directed Make:Prayag Cat Pt No P6810 or equivalent |
| 114 | S&F in repair 15 mm bore stop cock (concealed type) with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete complete all as specified and directedMake: Prayag Cat Pt No 6514 or equivalent |
| 115 | S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete complete all as specified and directed Prayag Cat Pt No P6812 or equivalent |
| 116 | S&F in repair 125 mm round shower rose with 225 mm longSS arm with flange complete all as specified and directed. Make :Prayag Cat Pt No GBOS-606 or equivalent |
| 117 | S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Prayag Cat Pt No GBA-118S or equivalent |
| 118 | S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90 gms Make:Prayag Cat Pt No 124HW or equivalent |
| 119 | S&F in repairs Pillar taps standard of PTMT any colour 15mm bore min wt 125 gms Make:Prayag Cat Pt No 130-Q or equivalent |
| 120 | S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete complete all as specified and directed |
| 121 | S&F in repair grating round 75 mmsize of steelCP with/without hole complete all as specified and directed |
| 122 | S&F in repair grating round 100 mm size of steel CP with/without hole complete all as specified and directed |
| 123 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete complete all as specified and directed. |
| 124 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete complete all as specified and directed. |
| 125 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete complete all as specified and directed. |
| 126 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete complete all as specified and directed. |
| 127 | S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete complete all as specified and directed. |
| 128 | S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete complete all as specified and directed. |
| 129 | S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete complete all as specified and directed. |
| 130 | S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete complete all as specified and directed. |
| 131 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete complete all as specified and directed |
| 132 | S&F in repairfor PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete complete all as specified and directed |
| 133 | S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as directed |
| 134 | -Ditto- all as per item No 133, here in before but on 75mm dia of bore |
| 135 | M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed. |
| 136 | Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed. |
| 137 | Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural workincludinguding special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes confoRMing to IS: 4923-1997 gradeSt.-240 fixed with angle cleats or other connecting platescomplete all as specified and as directed. |
| 138 | M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing;frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work confoRMing to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 139 | Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,confoRMing to Fe-290 Grade-E-165 complete all as specified and as directed. |
| 140 | Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings complete all as specified and directed |
| 141 | Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 142 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screwswith two corrugation side lapcomplete all as specified and as directed. |
| 143 | -Ditto- all as per item No 142 above here in before but plain sheets on riges,valley gutters and similar works etc complete all as directed |
| 144 | S&F in repair 2 mm thick fibre glass reinforced translucent corrugated or plain sheeting with coach screw and washers in roof or wall etc complete all asspecified and directed. |
| 145 | S&F in repair 0.63 mm thick Plain, galvanised steel sheeting, in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) complete all as directed |
| 146 | Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore patternor similar tiles in roofing and rubbish off the premises complete all as specified and as directed. |
| 147 | All as per serial item No. 146 here-in-before but except tiles. |
| 148 | Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc incl dismantling of tile and rubbish off the premises complete all as specified and as directed. |
| 149 | Supply and fix for second class hardwood clean sawn tile battens, cross sectional areaexc 5 and n.exc 15 Sqcm spaced at 30 cm centresto centres fixed with nails complete including dismantling of scantling and rubbish off the premises all as specified and as directed.(NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each). |
| 150 | All as per serial item No. 149 here-in-before but except batten. |
| 151 | Dismantling wooden scantling of size 40sqcm and over in section and in any position and position |
| 152 | Material and labour for second class hard wood, clean sawn, in scantling timber framed work complete all as specified and as directed. |
| 153 | All as per serial item No. 152 here-in-before but except timber. |
| 154 | Material and labour for preparation of battens, any size and spacing and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed. |
| 155 | M&L PVC Fibre board Eves/Weather Boarding 18 to 20mm thick and fixed, complete approved arch pattern any size and shape including taking down of existing board all as specified and as directed.Make: Shera wall/Everest/ V board etc |
| 156 | Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed. |
| 157 | All as per serial item No. 156 here-in-before but except sheeting. |
| 158 | Dismantling of wall/ceiling board of any description and any thickness including cover fillets, ceiling grid etc complete all as specified and as directed. |
| 159 | M&L for semi perforated 12 mm thick micro tegular edged or 10 mm squar edgedGRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS-8225; 1987, Noncombustible as per BS-476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal. T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per Sqm incl both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm inteRMediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24 x 24x o.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out upto 12 Mtr height as per specifications, drawing and as directions of the Engr-in-Charge. |
| 160 | Removing of vegetation / plantation on the wall/ roof/ any position of up to fourth storey building including necessary scaffolding and roots, girth n. exc. 10cm eachand applying chemical treatment with GLYPHOSATE 41% and making good surface including removing /refixing of CI/GI pipe lines (area n exc 0.5 sqm) complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) |
| 161 | M&L for repair to Aluminium door/windows of anydescription area exc 1 Sqm but not exc 2 Sqm each, taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminiumsnap beading, re-setting floor/ hydraulic spring etc complete all as specified and as directed. |
| 162 | M&L for repair to Aluminium door/windows of anydescription , area exc 2 Sqm each, taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminiumsnap beading, re-setting floor/ hydraulic spring etc complete all as specified and as directed. |
| 163 | M&L for fixing of 3D wall paper (selected colour) including complete removal of existing tretment on wall and applying 1 to 1.5 mm thick wall care putty , scrubbing with sand paper to make a surface smooth complete all as specified and directed. |
| 164 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. |
