Tender For Repair/Maintenance Of Wooden Steel And Tp Furniture Items Including Painting And Polishing At Af Stn Bkt, Lucknow-Uttar Pradesh

TDR : 52871992

Tender Notice
BOQ

17 Days Left

Lucknow , Uttar Pradesh

Tender Brief : Tender For Repair/Maintenance Of Wooden Steel And Tp Furniture Items Including Painting And Polishing At Af Stn Bkt

Document Fees
₹ 500 /-

EMD
₹ 61600.0 /-

Tender Value
₹ 30.80 Lakhs /-

Submission Date
29-12-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	PART \"A\" : MAINT OF WOODEN FURNITURE REPAIR TO CHAIR WRITING/CBA :-Labour & Material for dismantling/ opening of joints / removal / repair of damaged/ broken parts or member of chair writing / CBA as mentioned below where required and provision of replacement of the same member or material and fixing it including removing of unserviceable cane, applying filler or putty in the minor cracks, and atleast two coats of polishing with French polish to the whole repaired item ( Qty of each polished item will be measured and paid separately) as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc and also including shifting, transporting and stacking of furniture and equipmentat the site and furniture store or yard alike by the contractors\" own arrangement and cost. All as directed by Engr-in-charge. All as mentioned above as applicable but for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drgall as directed by Engineer-in-Charge.(FD-280)
2	All as per item No 1 above but for rear leg (left or right).
3	All as per item No 1 above but for front/ rear/side members of seat .
4	All as per item No 1 above but for back Stiffener.
5	All as per item No 1 above but for bottom stiffener.
6	All as per item No 1 above but for Arms.
7	All as per item No 1 above but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
8	All as per item No 1 above but for Removal of u/s cane and supply and re-canning of chair writing/CBA with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1, all as specified and directed by engr-in-charge.
9	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR WRITING:Labour & Material for comprehensive including petty repair and fitment ( where no replacement of damaged part is required) of the chair writing / CBA by repairing, fitting & fixing the loosened partsand members of the item using nails, screws, metal strips etc to enhance the longevity and structural strength of the item or by repairing and fixing surface irregularities or defect by preparing and fixing the surface defects by applying putty, PoP etc and then applying atleast two coats of French polish as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc. complete all as per specified and directed.
10	REPAIR TO CHAIR DINING :-All as per item No 1 above but for chair dinning.All as mentioned above as applicable for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drgcomplete all as per specified and directed.(FD-279)
11	All as per item No 10 above as applicable but for rear leg (left or right)
12	All as per item No 10 above as applicable but for Front/Rear/Side members of seat.
13	All as per item No 10 above as applicable but for bottom stiffener
14	All as per item No 10 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete all as per specified and directed.
15	All as per item No 10 above as applicable but for Removal of u/s cane and supply and re-canning of chair dining with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1 complete all as per specified and directed.
16	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR DINING:All as per item no. 09 as applicable but for Chair Dining.
17	REPAIR TO CHAIR EASY :- All as per items No 1 above but for chair easy.All as mentioned above as appicable for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drgcomplete all as per specified and directed.(DB-2960/4979,FD-17/201/229)
18	All as per item No 17 above as applicable but for Rear leg (left and right)
19	All as per item No 17 above as applicable but for front/ rear/side members of seatFrame .
20	All as per item No 17 above as applicable but for top/ bottom/side members of Back Frame .
21	All as per item No 17 above as applicable but for bottom stiffner (front and Back below seat frame)
22	All as per item No 17 above as applicable but for arms (Left or Right)
23	All as per item No 17 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
24	All as per item No 17 above as applicable but for Removal of u/s cane and supply and re-canning of chair easy with 2mm wide half round virgin premium white or approved colour plastic cane of approved make and quality except the border which shall be 3mm flat swide half round virgin premium white or approved colour plastic cane of approved make and quality and weaving must be in accordance to Godrej Pattern as shown on drawing FD-03(M)Sheet 1/1. All as specified and directed by engr-in-charge.
25	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR EASY:All as per item no. 09 as applicable but for Chair Easy complete all as per specified and directed.
26	REPAIR TO TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER :-Labour & Material for dismantling/ opening of joints / removal / repair of damaged/ broken parts or member of Table 900mm x 600mm x 760mm with drawer or without drawer as mentioned below where required and provision of replacement of the same member and fixing it, applying filler or putty in the minor cracks, and atleast two coats of polishing with French polish to the whole repaired table ( Qty of each polished item will be measured and paid separately) as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing tomatch with existing surface etc and also including shifting, transporting and stacking of furniture and equipmentat the site and furniture store or yard alike by the contractors\" own arrangement and cost. All as directed by Engr-in-charge.All as mentioned above as applicable for S&F Table topof size 900 mm x 600 mm made of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as per specified and directed.(FD-55/224/283/284)
27	All as per item no. 26 above as applicable but for S&F leg made out of IInd class seasoned hard wood.
28	All as per item no. 26 above as applicable but for S&F long rail made out of IInd class seasoned hard wood.
29	All as per item no. 26 above as applicable but for S&F short rail made out ofIInd class seasoned hard wood.
30	All as per item no. 26 above as applicable but for S&F middle stiffener made out ofIInd class seasoned hard wood.
31	All as per item no. 26 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.
32	All as per item no. 26 above as applicable but for S&F drawers front panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
33	All as per item no. 26 above as applicable but for S&F drawers back / side panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
34	All as per item no. 26 above as applicable but for S&F drawers bottom panel made of 12 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
35	All as per item no. 26 above as applicable but for S&F set of 2 of premium quality heavy duty soft closing telescopic channels of make: godrej / ebco / hettich / dorset or equivalent as approved and specified, including modification required in the drawers and cabinet for drawers for fixation of telescopic channel.
36	All as per item no. 26 above as applicable but for S&F locks of approved make with min three SS keys for drawer for the table as per existing table design or as directed and specified and approved by engr-in-charge
37	All as per item no. 26 above as applicable but for S&F chrome plated or brass knobs for drawer for the table as per existing table design or as directed and specified and approved by engr-in-charge
38	All as per item no. 26 above as applicable but for S&F \"L\" shaped metal sheet strip for fixationto the legs of the tablefor strengthening of the joints wherever required.
39	All as per item no. 26 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
40	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER:All as per item no. 09 as applicable but for TABLE 900 X 600 X 760MM WITH/WITHOUT DRAWER.
41	REPAIR TO TABLE WRITING :-All as per items No 26 above but for Table writing. All as mentioned above as applicable for S & F top for table writing of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete all as per specified and directed. (FD-275)
42	All as per item no. 41 above as applicable but for S&F drawers front panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
43	All as per item no. 41 above as applicable but for S&F drawers back / side panel made of 18 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
44	All as per item no. 41 above as applicable but for S&F drawers bottom panel made of 12 mm HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
45	All as per item no. 41 above as applicable but for S&F premium quality heavy duty soft closing telescopic channels of make: godrej / ebco / hettich / dorset or equivalent as approved and specified, including modification required in the drawers and cabinet for drawers for fixation of telescopic channel.
46	All as per item no. 41 above as applicable but for S&F locks of approved make with min three SS keys for drawer and door shutter for the table as per existing table design or as directed and specified and approved by engr-in-charge
47	All as per item no. 41 above as applicable but for S&F Door shutter made of 18mm thick, HDHMR board BWR typelaminated with 1 mm thick laminate on one side and balancing white on other side, with 4mm thick teak wood edging and auto soft closing 180 degree concealed hinges screwed and chrome plated or brass knob 35mm size.
48	All as per item no. 41 above as applicable but for S&F Back of table writing made of6mm ply wood BWR type laminated with 1 mm thick laminate balancing white on both side.
49	All as per item no. 41 above as applicable but for S&F Side of table writing made of 18 mm thick HDHMR BWR type laminated with 1 mm thick laminate on one side and balancing white on other side.
50	All as per item no. 41 above as applicable but for Partition shelf for cabinet made of 18 mm thick HDHMR board BWR type laminated with 1 mm thick laminate on one side and balancing white on other side
51	All as per item no. 41 above as applicable but for S&F new legs made out of IInd class seasoned hard wood.
52	All as per item no. 41 above as applicable but for S&F middle stiffener made out of IInd class seasoned hard wood.
53	All as per item no. 41 above as applicable but forS&F side stiffener made out of IInd class seasoned hard wood.
54	All as per item no. 41 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
55	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF Table Writing:All as per item no. 09 as applicable but for Table Writing.
56	REPAIR TO TEAPOY :- All as per items No 26 above but for Teapoy. All as mentioned above as applicable for S & F top for teapoy made of 18 mm BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete. (FD-278)
57	All as per item no. 56 above as applicable but for S&F leg made out of IInd class seasoned hard wood.
58	All as per item no. 56 above as applicable but for S&F long rail made out of IInd class seasoned hard wood.
59	All as per item no. 56 above as applicable but for S&F short rail made out of IInd class seasoned hard wood.
60	All as per item no. 56 above as applicable but for S&F middle stiffener made out of IInd class seasoned hard wood.
61	All as per item no. 56 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.
62	All as per item no. 56 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
63	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TEAPOY:All as per item no. 09 as applicable but for teapoy.
64	REPAIR TO TABLE PEG :- All as per items No 26 above but for Table Peg.All as mentioned above as applicable for S & F top for table peg made of 18 mm BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete. (FD-277)
65	All as per item no. 64 above as applicable but for S&F leg made out of IInd class seasoned hard wood.
66	All as per item no. 64 above as applicable but for S&F long rail made out of IInd class seasoned hard wood.
67	All as per item no. 64 above as applicable but for S&F short rail made out of IInd class seasoned hard wood.
68	All as per item no. 64 above as applicable but for S&F middle stiffener made out of IInd class seasoned hard wood.
69	All as per item no. 64 above as applicable but for S&F side stiffener made out of IInd class seasoned hard wood.
70	All as per item no. 64 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
71	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE PEG:All as per item no. 09 as applicable but for table peg.
72	REPAIR TO TABLE CENTRE WITH SUNMICA / GLASS TOP:- All as per items No 26 above but for Table centre with sunmica top or glass top.All as mentioned above as applicable but for S&F Top of Table Centre made out of 18 mm BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete. (FD-274)
73	All as per item no. 72 above as applicable but for S&F Leg of same shape and size as existing made out of Ist class hard wood (kiln seasoned teak wood).
74	All as per item no. 72 above as applicable but for S&F Top long rail made out of IInd class seasoned hard wood.
75	All as per item no. 72 above as applicable but for S&F Top short rail made out of IInd class seasoned hard wood.
76	All as per item no. 72 above as applicable but for S&F Side stiffener made out of IInd class seasoned hard wood.
77	All as per item no. 72 above as applicable but for S&F Middle stiffener or any other supporting wooden member made out of IInd class seasoned hard wood.
78	All as per item no. 72 above as applicable but for S&F new toughened tinted or non tinted as directed ,glass 5 / 6 mm thick or as per existing size and shape & size similar to existing or as per requirement as specified and as directed duly shaped, chamfered, polished and edged made smooth, fixed to the table centre after due repair and polish all as directed and specified.
79	All as per item no. 72 above as applicable but for replacement of shoes with S & F new rubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
80	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE CENTRE:All as per item no. 09 as applicable but for table centre.
81	REPAIR TO SOFA SET 4 SEATER/5 SEATER :-Labour & Material for dismantling/ opening of joints / removal / repair of damaged/ broken parts or member of Sofa Set 3 seater or 1 seater or 2 seater as mentioned below where required and provision of replacement of the same member or material and fixing it including removing of unserviceable tapestry, string dori, cushions, foam or padding, etc, applying filler or putty in the minor cracks, and atleast two coats of polishing with French polish to the whole repaired sofa ( Qty of each polished item will be measured and paid separately) as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing to match with existing surface etc and also including shifting, transporting and stacking of furniture and equipmentat the site and furniture store or yard alike by the contractors\" own arrangement and cost. All as directed by Engr-in-charge.All as mentioned above as applicable but for S&F Arm of sofa set 3 seater or 1 seater or 2 seater made out of IInd class seasoned hard wood.(FD-281,FD-373)
82	All as per item no. 81 above as applicable but for S&F front leg (left or right) of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
83	All as per item no. 81 above as applicable but for S&F rear leg (left or right) of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
84	All as per item no. 81 above as applicable but for S&F Side Stiffners of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
85	All as per item no. 81 above as applicable but for S&F Middle Stiffners of sofa set single or 3 seater made out of IInd class seasoned hard wood. duly french polished of size and pattern all as shown on drg.
86	All as per item no. 81 above as applicable but for S&F long rails of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
87	All as per item no. 81 above as applicable but for S&F short rails of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
88	All as per item no. 81 above as applicable but for S&F supporting members of sofa set single or 3 seater made out of IInd class seasoned hard wood duly french polished of size and pattern all as shown on drg.
89	All as per item no. 81 above as applicable but for supply of new HR foam cushion Make-Sleepwell /Godrej /Kurlon / Duroflex or equivalent 100 mm thick 32 density duly 530mm W x 560 mm L x 100 mm Thick or as per drg covered duly approved and as directed by engr-in-charge .
90	All as per item no. 81 above as applicable but for supply of new cushion cover of superior quality tapestry cloth ( Leatherette or premium fabric velvet type as specified and approved) cover of specified colour and pattern with good quality zip/chain (Not less than Rs300/Mtr) alongwith inner cotton lining cloth cover with perfect fit for cushion of size 530mm W x 560 mm L x 100 mm Thick or as per drg, duly approved and as directed by engr-in-charge .
91	All as per item no. 81 above as applicable but for comprehensive repair of sofa set 3 seater ( designer style or TP drg ) as per existing design by removing and replacing of old U/S tapestry Cloth /Leather / rexine cloth , hession Cloth,Old Spring, cushion / foam, doori & S&F new tapestry material ( Leather / leatherette / velvet cloth as per exisitng item), hssion Cloth, Springs, cushions / HR foams of Make-Sleepwell /Godrej /Kurlon / Duroflex or equivalent padding of density and make as directed, doori, etc along with any other wooden or metal or plywood parts of Sofa 3 seater as per existing item shape / size / design all as required and approved and directed by engr-in-charge.
92	Al as per item no. 91 above as applicable but for comprehensive repair of sofa set 2 seater ( designer style or TP drg ) as per existing design.
93	All as per item no. 91 above as applicable but for comprehensive repair of sofa set 1 seater ( designer style or TP drg ) as per existing design.
94	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF SOFA SET 3/2/1 SEATER:All as per item no. 09 as applicable but for Sofa Set 3/2/1 seater.
95	REPAIR TO TABLE DRESSING GENTS WITH MIRROR :-All as per items No 26 above but for Table dressing gents with mirror.All as mentioned above as applicable but for Back side of the box of table with 12mm thick BWR grade plywood in one piece. (FD-230,379)
96	All as per item no. 95 above as applicable but for Top of the box of table with 12 mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on both sides, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices.
97	All as per item no. 95 above as applicable but for Bottom of box with 12 mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on both sides, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices.
98	All as per item no. 95 above as applicable but for Sides and partition with 12 mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on both sides, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices.
99	All as per item no. 95 above as applicable but for Drawers including replacement of Knobs with chrome plated or brass knobs all as directed.
100	All as per item no. 95 above as applicable but for Looking mirror with new mirror of 5.5 mm thick make - Swastika/Modiguard / Atul free from destruction and other defects with complete teak wood frame enclosed with 6 mm thick plywood BWR type.
101	All as per item no. 95 above as applicable but for Aluminum channel with standard aluminum channel having two \"U\" shaped channels for sliding of plain glass of 5mm thick in qty as reqd for each table.
102	All as per item no. 95 above as applicable but for Plain sliding glass 5mm thick with new sliding glass in qty as reqd for each table all as shown in drg.
103	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DRESSING GENTS WITH MIRROR:All as per item no. 09 as applicable but for Table dressing gents with mirror.
104	REPAIR TO TABLE DRESSING LADIES WITH MIRROR:- All as per items No 26 above but for Table dressing ladies with mirror.All as mentioned above as applicable but for Top of the table dressing ladies with 18mm thick prelaminated HDHMR boardBWR type teakveneered face on top and other side commercial.(FD-251,378)
105	All as per item no. 104 above as applicable but for Back of table with 12mm thick ply wood commercial type BWR.
106	All as per item no. 104 above as applicable but for Side and partition with 12mm thick prelaminated HDHMR board BWR type teakveneered faceon both side.
107	All as per item no. 104 above as applicable but for Bottom 12mm thick commercial BWR plywood all as specified and as directed.
108	All as per item no. 104 above as applicable but for drawers replaced with 6mm thick ply wood BWR type.
109	All as per item no. 104 above as applicable but for replacement of unserviceable looking mirror with new mirror of 5.5mm thick Make -Atul, Modiguard or Golden fish free from all defects with complete teak wood frame enclosed with 6mm thick ply wood BWR type.
110	All as per item no. 104 above as applicable but for Aluminum channel with standard aluminum channel having two \"U\" shaped channels for sliding of plain glass of 5 mm thick in qty as reqd for each table.
111	All as per item no. 104 above as applicable but for Plain sliding glass 5mm thick with new sliding glass in qty as reqd for each table all as shown in drg.
112	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DRESSING LADIES WITH MIRROR:All as per item no. 09 as applicable but for Table dressing ladies with mirror.
113	REPAIR TO BOOK CASE SMALL WOODEN :- All as per items No 26 above but for book case wooden.All as mentioned above as applicable but for top, side and bottom members for book case made of 19 mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.(FD-237/355)
114	All as per items No 113 above as applicable but for shelves for book case made of 19 mm thickBWR grade HDHMR of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
115	All as per items No 113 above as applicable but for back for book case made of 06 mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
116	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BOOK CASE WOODEN:All as per item no. 09 as applicable but for Book case wooden.
117	REPAIR TO BED PLY WOOD TOP:- All as per items No 26 above but for bed plywood top.All as mentioned above as applicable but for Removing of old unserviceable back rest of bed and S&F new back rest as per existing size and shape ofIInd class hard wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface.(FD-246)
118	All as per items No 117 above as applicable but for Removing of old unserviceable foot rest of bed & S&F of foot rest made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface.
119	All as per items No 117 above as applicable but for Removing of old ply top and S&F new ply top of 12mm thick BWR grade plywood of make: Greenply/ Archidply/ Century Ply or equivalent as approved.
120	All as per items No 117 above as applicable but for Removal of old wooden stiffeners and S&F IInd class hard wood stiffeners of size 900 x 50 x 60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc.
121	All as per items No 117 above as applicable but for Taking out old unsv long rail of bed plywood and providing of new long rail of IInd class hard wood of existing shape and size all as specified and Drg incl polishingtwo or more coats over a coat of wood filler after preparation of surface etc.
122	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BED PLYWOOD TOP:All as per item no. 09 as applicable but for Bed wooden plytop alongwith provision of metal L bend plate for supporting legs etc.
123	REPAIR TO TABLE DINING 6/8 PERSONS :- All as per items No 26 above but for Table dining 6 or 8 seater.All as mentioned above as applicable but for Top of table dining 6 seater of size 1500mm x 900mm or as per drg as per drg or existing table, made of 18mm thick BWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-273)
124	All as per items No 123 above as applicable but for Top of table dining 8 seater of size 1800mm x 900mm or as per drg or existing table, made of 18mm thick BWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
125	All as per items No 123 above but for Long rail of table dining 6 seater made of IInd class hard wood.
126	All as per items No 123 above as applicable but for Long rail of table dining 8 seater made of IInd class hard wood.
127	All as per items No 123 above as applicable but for Short rail of table dining 6 or 8 seater made of IInd class hard wood.
128	All as per items No 123 above as applicable but for legs of table dining 6 or 8 seater made of IInd class hard wood.
129	All as per items No 123 above as applicable but for replacement of rubber or plastic shoes steel plated, with SS Screws to the bottom of each legs.
130	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE DINING 6 OR 8 SEATER:All as per item no. 09 as applicable but for Table dining 6 or 8 seater.
131	REPAIR TO SIDE BOARD:- All as per items No 26 above but for Side Board.All as mentioned above as applicable but for Doors Double leafmade of 18mm thickBWR grade HDHMR board as per existing item or as directed, make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. including replacement of butt hinges, knobs and hasp & stapplecomplete. (FD-241,371 &372)
132	All as per items No 131 above as applicable but for Drawers of side board 18mm thickBWR grade HDHMR board with laminate as mentioned above.including replacement of CP Knobs, soft closing telescopic channel with fitment and fixation.
133	All as per items No 131 above as applicable but for Long rail of side board made of IInd class hard wood of existing shape and size.
134	Ditto all as per items No 131 above as applicable but for Short rail of side board made of IInd class hard wood of existing shape and size..
135	All as per items No 131 above as applicable but for Back of side board made of 6mm thick ply wood commercial type BWR.
136	All as per items No 131 above as applicable but for Top of side board made of 18mm thickBWR grade HDHMR board with laminate as mentioned above.
137	All as per items No 131 above as applicable but for Sides of side board made of 18mm thickBWR grade HDHMR board with laminate as mentioned above..
138	All as per items No 131 above as applicable but for Leg of side board made of IInd class hard wood of existing shape and size.
139	All as per items No 131 above as applicable but for Partition of side board 18mm thickBWR grade HDHMR board with laminate as mentioned above.
140	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF SIDE BOARD:All as per item no. 09 as applicable but for side board.
141	REPAIR TO HAT STAND WITH MIRROR:-All as per items No 26 above but for Side Board.All as mentioned above as applicable but for removing u/s brass or CP hooks in vintage design and supply & fixing Brass or CP hook in vintage design as per approved and specified design, shape, sizeand installing them on the repaired hat stand with mirror all as directed by engr-in-charge.(FD-23,206,230,233,362,361,1110)
142	All as per items No 141 above as applicable but for replacement to unserviceable looking mirror with new mirror of 5.5mm thick Make -Atul, Modiguard or Golden fish free from all defects with complete teak wood edging enclosedall as directed.
143	All as per items No 141 above as applicable but for Back made of 18 mm thick Prelaminated HDHMR board BWR as per existing size / shape or as per drawing with teak wood edging all around.
144	REPAIR TO COMPUTER TABLE: All as per items No 26 above but for Table computer MAP / TP.All as mentioned above as applicable but for Top of 18mm thick exterior grade prelaminated HDHMR Board as per existing item with one side melamine faceand balancing white on other side ISI marked with Ist class HW teak wood beading 4mm thick polishing with french polish (two or more coats) over a coat of wood filler / or PVC Edging duly fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete etc. all as directed and specified by engr-in-charge.(FD/E6/MAP03, TP)
145	All as per items No 144 above as applicable but for Keyboard Rack made of 18mm thick exterior grade prelaminated HDHMR Board as per existing item includingSS/ Alumimium telescopic channel premium quality as required all as directed and specified.
146	All as per items No 144 above as applicable but for Shelf / rack for CPU / other computer components as per existing size / shape or as per drawing made of 18mm thick exterior grade prelaminated HDHMR Board as per existing item
147	All as per items No 144 above as applicable but for Rubber / Plastic premium quality Shoes fitted to the bottom of the frame / side / leg of the table.
148	All as per items No 144 above as applicable but for Side of table computer made of 18mm thick exterior grade prelaminated particle board / MDF Board / Block Board
149	All as per items No 143 above as applicable but for M&L for two coats of Painting with synthetic enamel paint of colour as directed after scraping and surface preparation and one coat of red oxide primer on metallic frame parts and two coats ofPolishing after surface prepeartion with premium quality french polish on wooden parts.
150	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE COMPUTER:All as per item no. 09 as applicable but for Table computer.
151	REPAIR TO CHAIR DINING CUSHIONED:-All as per items No 01 above but for Chair dining cushioned.All as mentioned above as applicable but for S&F front leg (left or right ) made out with IInd class seasoned hard wood of size and shape as per existing chair or as per Drgall as directed by Engineer-in-Charge.(FD/MAP-11/ 04)
152	All as per items No 151 above as applicable but for rear leg (left or right)
153	All as per items No 151 above as applicable but for Front/Rear/Side members of seat.
154	All as per items No 151 above as applicable but for Stiffners.
155	All as per items No 151 above as applicable but for replacement ofrubber / plastic shoe of superior quality with steel plated screws of suitable size complete.
156	All as per items No 151 above as applicable but for Removing of existing U/S cushion from bottom seat of chair dining officers and S&F new HR foam cushion Make-Sleepwell/Godrej/ Kurlon, 75 mm thick 40 density duly covered with superior quality tapestry material ( Leatherette or velvet cloth as specified and approved) (Not less than Rs 300/Mtr) on top and cotton lining cloth on bottom of seat respectively including replacement of seat made of 12mm thick ply if required.
157	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR DINING CUSHIONED:All as per item no. 09 as applicable but for Chair dining cushioned.
158	Material & Labour for preparation of old wooden surfaces and atleast two coats of polishing with French polish to the whole item as per procedure mentioned in the particular specification after proper cleaning and preparation of the surface and proper dyeing if required and directed alongwith anti termite and anti borer treatement to all the wooden parts of the item, etc complete. To be noted: Qty considered below also include qty of items which are polished with french polish which is to be measured and paid separately for item no 1 to 155. All as mentioned above for Bed with ply wood top(FD-21,213,246)
159	All as per item no 157 above but for Chair writing/CBA (FD--202,280)
160	Allas per item no 157 above but for Chair Easy (FD-229,1108)
161	Allas per item no 157 above but for Chair dining(FD-209,279,203)
162	Allas per item no 157 above but for Sofa chair single seater (FD-281,373)
163	Allas per item no 157 above but for Sofa set two seater(FD-281,373)
164	Allas per item no 157 above but for Sofa set three seater(FD-281,373)
165	Allas per item no 157 above but for Table 3\"x2\" with & without drawer (FD-284,283)
166	Allas per item no 157 above but for Table writing (FD-249,275)
167	Allas per item no 157 above but for Table dressing gents with mirror (FD-31,230,379)
168	Allas per item no 157 above but for Table dressing ladies with mirror(FD-32,251,378)
169	Allas per item no 157 above but for Table centre with Sunmica Top / Glass Top (FD-235,274,393)
170	Allas per item no 157 above but for Table bed side (FD-210,248,276)
171	Allas per item no 157 above but for Teapoy(FD-232,278,382)
172	Allas per item no 157 above but for Table Peg (FD-236,277,384)
173	Allas per item no 157 above but for Book case small(FD-45,355,957)
174	Allas per item no 157 above but for Table dining 6 Pers(FD-273,371,1115)
175	Allas per item no 157 above but for Tabel dining 8 Pers(FD-273,376,1115)
176	Allas per item no 157 above but for Hat Stand Mirror Large /Small(FD-361,1115)
177	Allas per item no 157 above but for Chair dining cushioned(FD/MAP-11/04)
178	PART \"B\" : MAINT OF STEEL FURNITUREREPAIR TO ALMIRAH STEEL LARGE/MED WITH SHELVES/ 1/2 H x 1/2S Labour & Material for repair / maint of almirah steel large/medium with shelves/ 1/2H x 1/2S by replacing / repair to the damaged, dented, broken or unserviceable part of the almirah as appended below complete all as specified and directed includingsupply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors\" own arrangement as directed and specified by engr-in-charge.Removing of unserviceable locks and providing new locks of existing size and design such as 50mm, Brass Lever 6 levers ISI marked Make: Harrisson Locks / Link Locks/ Godrej Locks/ Hettich / ebco or equivalent make duly approved by engr-in-chargewith stainless steel keys in triplicate for Almirah large steel with shelves/ 1/2H x 1/2S and fixing including aligning and fitting them with existing 3 way locking system by riveting/ screw/ welding as required and directed by engr-in-charge. (FD-67(M), FD-243,FD-1031,1032,FD/E6/MAP/18)
179	All as per items No 178 above as applicable but for replacement of unserviceable locks for Almirah Med / Small steel.
180	All as per items No 178 above as applicable but for removing of unserviceable legs and providing new legs made out of 20 guage / 1mm thick MS CRCA sheet similar to existing shape, design & size & welding properly to almirah steel large with shelves / 1/2 H x 1/2 S as directed as per drg duly painted with two coats of synthetic enamel paintOlive green/ Smoke Gray or same as of existing colour as of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge, over a coat of red oxide primer by meansof spray painting. All as directed by engr-in-charge.
181	All as per items No 178 above as applicable but for almirah med steel.
182	All as per items No 178 above as applicable but for repairing and fixing of shelves by making good of dents and removal of scratches etc and fixing to the almirah body by providing new clamps in qty 4 or as required or by welding for each shelf as per existing design or directed to adjusting / fixing the shelves.
183	All as per items No 178 above as applicable but for removing of unserviceable shelves and providing and fixing the new shelves as per existing size and design made of 22 gauge MS CRCA sheet by riveting / clamps/ welding as per existing design and as directed by engr-in-charge.
184	All as per items No 178 above as applicable but for removing of unserviceable broken handles & providing new steel handle chromium plated similar to existing shape, size & design to almirah large/med steel with shelves / 1/2H x 1/2S & fix suitably as directed.
185	All as per items No 178 above as applicable but for removing of unserviceable 3 way locking mechanism / device alongwith rods & clamps for top and bottom locking of doors and providing new 3 way locking mechanism / device with rod of 10mm dia MS bar made toexisting shape, size and design including cover for lock and clamping as required for almirah large steel complete all as specified and directed by engr-in-charge.
186	All as per items No 185 above as applicable but for almirah med steel.
187	All as per items No 178 above as applicable but for Spray painting to both external & internal surfaces of almirah large steel with shelves / 1/2H x 1/2S with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed (where extensive paintwork to surface is required).
188	All as per items No 187 above as applicable but for almirah med steel
189	All as per items No 178 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of almirah large steel with shelves / 1/2H x 1/2S ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed.
190	All as per items No 189 above as applicable but for almirah med steel
191	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF ALMIRAH STEEL:Labour & Material for comprehensive repair including petty repair and fitment/ Denting/ Straightening of body or part and alignment of Door etc ( where no replacement of damaged part is required) of Almirah Large / small/ med steel with shelves / 1/2 H x 1/2S or any part thereof as required including repair/ fixing of hinges with welding , etc all as specified and directed by engr-in-charge.
192	REPAIR TO BEDSIDE LOCKER STEEL:Labour & Material for repair / maint of bedside locker steel by replacing / repair to the damaged, dented, broken or unserviceable part of the bedside locker steel as appended below complete all as specified and directed includingsupply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors\" own arrangement as directed and specified by engr-in-charge.Removing of unserviceable Hasp & Staple and providing new Hasp & Steel of existing shape & size as approved by engr-in-chargeand fixing by riveting/ screw as required and directed by engr-in-charge. (FD-127,257,1029)
193	All as per items No 192 above as applicable but for removing of unserviceable legs and providing new legs made out of 1mm thick MS CRCA MS sheet similar to existing shape, design & size & welding properly to bed side locker steel as directed as per drg duly painted with two coats of synthetic enamel / hammertone paint in Olive green/ Smoke Gray or same as of existing colour as approved and directed by engr-in-charge, over a coat of red oxide primer by meansof spray painting.
194	All as per items No 192 above as applicable but for Repairing of shelves by providing new clamps or by welding as per existing design or directed to adjusting / fixing the shelves.
195	All as per items No 192 above as applicable but for Removing of unserviceable shelves and providing and fixing the shelves by riveting / clamps/ welding as per existing design and as directed by engr-in-charge
196	All as per items No 192 above as applicable but for Spray painting to both external & internal surfaces of bedside locker steel with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed (where extensive paintwork to surface is required).
197	All as per items No 192 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of bedside locker steel ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed.
198	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BEDSIDE LOCKER STEEL:All as per items No 191 above as applicable but for Bedside Locker steel.
199	REPAIR TO BED HARD STEEL( MAP):Labour & Material for repair / maint of bed hard steel ( MAP) by replacing / repair to the damaged, dented, broken or unserviceable part of thebed hard steel ( MAP) as appended below complete all as specified and directed includingsupply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors\" own arrangement as directed and specified by engr-in-charge.Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge complete all as per specified and as direction by Engr-in-charge.(FD/E6/MAP/08(R))
200	All as per items No 199 above as applicable but for M&L for scrubbing, derusting and applying twocoat of synthetic Black enamel paint (spray painting) incl preparation of surface all asdirected by Engr - In - charge for Bed hard steel.
201	All as per items No 199 above as applicable but for Removing of unserviceable prelaminated PB / MDF / HDHMR 18 mm thick of head board of bed hard steel and supply and fixing 18mm thick prelaminated HDHMR Make:- Greenply/ Archid Ply/ Century Ply or equivalent all as per specified and as direction by Engr-in-charge.
202	All as per items No 196 above as applicable but for Removing of unserviceable prelaminated particle board 18 mm thick of foot board of bed hard steel and supply and fixing 18mm thick prelaminated HDHMR exterior grade of make Greenply/ Archid Ply/ Century Ply or equivalent as approved ISI Marked all as per specified and as direction by Engr-in-charge.
203	All as per items No 199 above as applicable but for S&F in repair rubber shoe black for 38mm Square pipe suitable for legs of Bed hardSteel.
204	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BED HARD STEEL( MAP):All as per items No 191 above as applicable but for Bed Hard Steel MAP.
205	REPAIR TO BOOK CASE STEEL:Labour & Material for repair / maint of bedside locker steel by replacing / repair to the damaged, dented, broken or unserviceable part of the bedside locker steel as appended below complete all as specified and directed includingsupply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors\" own arrangement as directed and specified by engr-in-charge.Taking out unserviceable handle and S&F of new chromium plated Steel handle of same size, size & design as existing as directed by Engr-in-Charge (FD-90,FD-1028)
206	All as per items No 205 above as applicable but for Taking out unserviceable locks and S&F new brass lever 4/6 lever lock of make: harrisson/ Link/ godrej/ hettich /Ebco or equivalent make duly approved by engr-in-chargewith stainless steel keys in triplicate all as specified and directed.
207	All as per items No 205 above as applicable but for Opening of shelves and cleats and denting of de-shaped portion / welding as required and refixing in same position as directed by engr-in-charge
208	All as per items No 205 above as applicable but for Removing of unserviceable/broken glass and S&F new glass 3 mm thick of existing shape and size or as shown on drawing and directed by Engr-in-Charge. Make: Modiguard/Atul/Swastik or equivalent duly approved by engr-in-charge.
209	All as per items No 205 above as applicable but for Spray painting to both external & internal surfaces of Book case steel with one coat of red oxide primer and after it, two coats of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed (where extensive paintwork to surface is required).
210	All as per items No 205 above as applicable but for painting either by spray painting or by brush as required according to environment and conditions to external or internal surfaces or both as directed of Book case steel ( This item is for items where surface of almirah does not require extensive paint work or needs light or petty touchup etc) with one coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed.
211	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF BOOK CASE STEEL:All as per items No 191 above as applicable but for book case steel.
212	REPAIR TO CHAIR REVOLVING/ COMPUTER/EXECUTIVE GODREJ PATTERN : Dismantling and re-assembling with new components of the following unserviceable part/components of chair revolving steel alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by Engr-in-charge of the following :-Hydraulic system complete set as approved by Engr-in-charge (TP)
213	All as per items No 212 above as applicable but for Chair leg wheel made of plastic ( first quality / not recycled) as approved by Engr-in-charge
214	All as per items No 212 above as applicable but for Side handle as per existing shape, size & design and as directed.
215	All as per items No 212 above as applicable but for replacement of unserviceable plywood chair seat with supply and fixing of moulded / formed plywood chair seat made of BWR type plywood.
216	All as per items No 212 above as applicable but for replacement of unserviceable plywood chair back with supply and fixing of moulded / formed plywood chair back L shaped made of BWR type plywood.
217	All as per items No 212 above as applicable but for Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by Engr-in-chargeincluding removing and fixing of PVC edging all around as per existing shape, size and design as required.
218	All as per items No 212 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry upholstery material cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.
219	All as per items No 212 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of premium leatherette upholstery material in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 350/Mtr) as approved by engr-in-charge as per existing shape, size & design as directed including removing and fixing of PVC edging all around as per existing shape, size and design as required.
220	All as per items No 212 above as applicable but premium quality Wheel Base made of plastic ( first quality / not recycled) with complete set
221	All as per items No 212 above as applicable but for Iron Base plate with complete set
222	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR REVOLVING:All as per items No 191 above as applicable but for Labour and material for comprehensive repair including petty repair and fitment (where no replacement of damaged part is required) of chair revolving.
223	REPAIR TO CHAIR NON REVOLVING CUSHIONED /VISITOR / CHAIR WRITING (MAP):Dismantling and re-assembling with new components of the following unserviceable part / components of chair visitor alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by engr-in-charge of the following :-Removal of U/S Foam seat bottom complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by Engr-in-charge.(TP, FD/E6/MAP/12)
224	All as per items No 223 above as applicable but for removal of U/S Foam seat back complete and S&F new Foam make Sleepwell / Kurlon / Godrej or equivalent as approved by Engr-in-charge.
225	All as per items No 223 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directedincluding removing and fixing of PVC edging all around as per existing shape, size and design as required.
226	All as per items No 223 above as applicable but for Removal of U/S Cushion upholstery material and supply & fixing of superior tapestry cloth / premium leatherite cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directedincluding removing and fixing of PVC edging all around as per existing shape, size and design as required.
227	All as per items No 223 above as applicable but for replacement of unserviceable plywood chair seat with supply and fixing of moulded / formed plywood chair seat made of BWR type plywood.
228	All as per items No 223 above as applicable but for replacement of unserviceable plywood chair back with supply and fixing of moulded / formed plywood chair back L shaped made of BWR type plywood.
229	All as per items No 223 above as applicable but for Supply and Fixing of rubber shoes of premium quality as per existing shape, size & design for the chair non revolving visitor as directed and specified by engr-in-charge.
230	All as per items No 223 above as applicable but for M&L for scrubbing and derusting, denting / repairing of de-shaped portion of frame and metal strips and applying one coat of primer and over it two coat ofsynthetic enamel paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed (by spray painting) of approved colour incl preparation of surface all asdirected by engr-in-charge.
231	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF CHAIR VISITOR:All as per items No 191 above as applicable but for Labour and material for comprehensive repair including petty repair and fitment ( where no replacement of damaged part is required) of chair visitor.
232	REPAIR TO CHAIR VARANDAH CANNED / PVC SEAT & BACK (MAP)Dismantling and re-assembling with new components of the following unserviceable part/components of chair varandah steel alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by EIC of the following:Comprehensive repairs to broken mild steel components of chair varandah with gas welding, including replacing broken/ worn out legs with new 20mm dia MS pipe 1.6mm thick 75mm to100mm long for each chair. (FD-19,256,259,359,FD/MAP-II/06, FD/MAP)
233	All as per items No 232 above as applicable but for Removing of all u/s canes of chair varandah and supply & recanning with premium plastic cane of size 4mm / 6mm half round best quality as per IS-5378-1968 including Two coat of Synthetic Enamel White / approved colour paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed to complete frame before canning after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg. after preparation of steel surfaces.(DRG: II/15)
234	All as per items No 232 above as applicable but for S & F PVC rubber Shoe/Toe of best quality after removing the old un- serviceable shoes all as specified and directed.
235	All as per items No 232 above as applicable but for Removing and replacing unserviceable seat back & seat bottom PVC moulded by fitting with new PVC moulded seat back & seat bottom ofchair verandah including two coat of Synthetic Enamel paint White /approved colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed to complete frame of chair after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg No -. FD/MAP-II/06, Make of the PVC Seat & Back - AMKO, Classic or Equivalent as approved by Engr-in-charge.( Note :-Both Seat back & Seat bottom of the chair verandah shall be replaced to form 1 unit for the purpose of payment to the contractor.)
236	REPAIRS TO CHAIR TUBULAR STEEL WITH OR WITHOUT ARMS:Dismantling and re-assembling with new components of the following unserviceable part / components of chair tubular steel CB alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by engr-in-charge of the following:Gas welding to broken members of chair tubular steel with & without arms complete all as per specified and directed. (FD-75(M))
237	All as per items No 236 above as applicable but for Painting of MS members of chair tubular steel with and without arms with two coat of synthetic enamel paint of olive green/ smoke gray or colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge after duly preparation of steel surface all as specified and directed.
238	All as per items No 236 above as applicable but for Taking out unserviceable seats from steel chair with & w/o Arms and S&F IInd class hard wood seat of existing size & shapeand fixed with suitable bolts, nuts and washer including polishing, painting and recanning with polythene white cane half round of premium virgin quality as approved by engr-in-charge as per IS-5378 -19682mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as directed by engr-in-charge.
239	All as per items No 236 above as applicable but for steel chair back.
240	All as per items No 236 above as applicable but for Taking out repairable seats from steel chair with & w/o Arms and fixing back the existing seat after recanning with polyethelyne white cane half round of premium virgin quality as approved by engr-in-charge as per IS-5378 -19682mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as directed by engr-in-charge.
241	All as per items No 236 above as applicable but for steel chair back -do-
242	All as per items No 236 above as applicable but for Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer
243	All as per items No 236 above as applicable but for S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair with suitable size of steel screw
244	All as per items No 236 above as applicable but for S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete.
245	CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOPAND REPAIR OF CHARPOY GI PIPE PLYTOP AND CHARPOY IP FOLDING HARD TOPRemoving of unserviceable nylon newar and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge and fixing same with two nos of flat iron strip of size 900x32x5mm, bolts nuts and washers bolts of size 5x65mm 12 nos round countersunk head bolts after drilling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing, alignment of charpoy to the level, chamfering of the edges as required and directed complete including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor\"s own arrangement all as per specified and as direction by Engr-in-charge. (FD-220,FD-220(R),FD-388(R))
246	Removing of unserviceable elbow of charpoy GI pipe and S & F three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge.
247	Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitable for charpoi GI pipe 32mm bore complete all as specified & directed.
248	M&L for removing the threadless/broken long rails from chairpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing.
249	Taking out existing old broken short rail from chairpoy GI32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 27(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items complete all as per specified and directed.
250	Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 Nos new legs in position made out of old broken long rail/ short rail obtained from taking down above item No 27 (d) & 27(e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and two Nos MS clamp made out of 25x3mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel paint over a coat of oxide primer and complete all as specified and directed by engineer-in-Charge.
251	Opening of joints of GI Chairpoy of 32 mm pipe where repaired and reassembling incl provision at bottom of legs shall be plugged with 3mm thick mild steel sheet welded to bottom of legs and hard wood plugs shall not be provided complete all as per specified and directed.
252	Supply and welding 02 Nos flat iron 25mmx3mm mild steel clamp made to shown on drawing shall be welded to all galvanised iron legs. Bottom of lower clamp shall be 275mm from top of Horizontal rails. Bottom of lower clamp shall be plugged with 2mm thick mild steel sheet complete all as per specified and directed.
253	Removing of U/S Flat Iron and providing and fixing of new flat iron strip of size 900x32x5mm by welding to the Long rail as shown in the drawing all as specified and directed by engr-in-charge.
254	Removing of unserviceable Plywood and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ ArchidPly or equivalent as approved by engr-in-charge and fixing same withbolts nuts and washers, bolts of size 5x65mm 12 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor\"s own arrangement as specified and as per direction by Engr-in-charge.
255	Removing of unserviceable Plywood and supply and fixing 12 mm thick ply wood commercial BWR HDHMR ISI marked Make: Geenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-charge and fixing same withbolts nuts and washers, bolts of size 5x35 mm 16 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing / repairing of charpoy GI pipe folding\"s component by riveting/ screwing / welding as required to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor\"s own arrangementas specified and as per direction by Engr-in-charge.
256	M&L for scrubbing, derusting and applying twocoat of synthetic Olive green / silver gray or approved colour enamel paint of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge (by spray painting) incl preparation of surfaceby derusting , scraping and straigtening bent part part of metal frame including handling, shifting of furniture and equipement on site as well as on yard by contractor\"s own arrangement all asdirected by Engr - In - charge for charpoy folding IP Ply Top.
257	REPAIR TO CHARPOY MS BOX SECTION WITH PLY WOOD TOP:-Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: Greenply/ Archid Ply/ Century Ply or equivalent as approved by engr-in-chargecomplete all as per specified and as direction by Engr-in-charge. (FD-MAP-II/01)
258	M&L for scrubbing, derusting, repairing the deshaped portion of the frame and applying two coat of synthetic enamel paint (spray painting) of black or approved colour incl preparation of surface complete all as per specified and directed for Charpoy MS Box section with plywood top
259	All as per items No 257 above as applicable but replacement of legs made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm
260	All as per items No 257 above as applicable but replacement of short rails made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm
261	All as per items No 257 above as applicable but replacement of long rails made of 16 gauge MS CRCA rectangular section pipe 25mm x 65mm
262	S&F in repair rubber shoe black for 32mm Square pipe suitable for legs of Charpoy MS Box section with plywood top complete all as per specified and directed.
263	REPAIR TO TABLE OFFICE (OFFICER / CLERK) STEEL:Labour & Material for repair / maint of table office (officer/clerk) steel by replacing / repair to the damaged, dented, broken or unserviceable part of the table office (officer/clerk) steel as appended below complete all as specified and directed includingsupply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors\" own arrangement as directed and specified by engr-in-charge.Dismantling of unserviceable table top and providing new top for table office officer steel (1800mm x1200mm) made of 18mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-84,1004,1003,1005,1006,1002)
264	All as per items No 263 above as applicable but for table office officers (1680mm x 870mm)
265	All as per items No 263 above as applicable but for table office clerk steel(1200mmx900mm)
266	All as per items No 263 above as applicable but for gas welding to all broken joints / defects of table office officer/clerk metal structure.
267	All as per items No 263 above as applicable but for Repairing to the drawers of table office officers /clerk steel, making good dents, proper alignment for smooth function of drawers including for removing of unserviceable locks of drawer as per existing shape and sizeand supply & fixing new 6 brass lever locks as per existing shape and size with key in triplicate as specified in drg
268	Ditto all as per items No 263 above as applicable but for removing of unserviceable handle of drawer as per existing shape and sizeand supply & fixing new handle of drawer as per existing shape and size with key in triplicate as specified in drg
269	Ditto all as per items No 263 above as applicable but for Spray painting to both inside & outside of whole body incl drawer & legs of Table office officer steel with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed.
270	All as per items No 269 above as applicable but for table office clerk steel
271	All as per items No 263 above as applicable but for S &F of rubber shoe withnew rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.
272	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE OFFICE STEEL:Labour & Material for comprehensive repair including petty repair and fitment (where no replacement of damaged part is required) of Table office steel includingsupply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors\" own arrangement as directed and specified by engr-in-charge.
273	REPAIR TO TABLE STEEL 900 X 900 X 760 MM:-All as per items No 263 above as applicable but for Dismantling of unserviceable table top and providing new top for table steel 900 mm x 900 mm x 760 mm made of 18mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-1009)
274	All as per items No 273 above as applicable but for Gas welding to all broken joints of table Steel900mm x900mm x760mm including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete
275	All as per items No 273 above as applicable but for S &F of rubber shoe withnew rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.
276	All as per items No 273 above as applicable butfor Spray painting to both inside & outside of whole body of Table steel 900 mm x 900 mm x 760 mm with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed.
277	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE STEEL 900 MM x 900 MM x 760 MM:All as per items No 272 above as applicable butfor Table steel 900 mm x 900 mm x 750 mm.
278	REPAIR TO TABLE 900MM X 600MM X 760MM WITH DRAWER /WITHOUT DRAWER STEELAll as per items No 263 above as applicable but for Dismantling of unserviceable table top and providing new top for table steel 900 mm x 600 mm x 760 mm made of 18mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item. (FD-1007,1008)
279	All as per items No 278 above as applicable butfor Gas welding to all broken joints of table900mm x600mm x760mm with drawer/ without drawer Steel including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete
280	All as per items No 278 above as applicable butfor Repairs to the drawer of table steel making good dents, proper alignment for smooth function of drawer.
281	All as per items No 278 above as applicable but for removing of unserviceable locks of drawer as per existing shape and sizeand supply & fixing new 6 brass lever locks as per existing shape and size with key in triplicate as specified in drg
282	All as per items No 278 above as applicable but for removing of unserviceable handle of drawer as per existing shape and sizeand supply & fixing new handle of drawer as per existing shape and size with key in triplicate as specified in drg
283	Ditto all as per items No 278 above as applicable butfor Spray painting to both inside & outside of whole body of Table steel 900 mm x 600 mm x 760 mm with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Glooss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed.
284	All as per items No 278 above as applicable butfor S &F in repair /replacement of rubber shoe of superior quality withsuitable size complete all as directed and specified in drg.
285	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE STEEL 900 MM x 600 MM x 760 MM:All as per items No 272 above as applicable butfor Table steel 900 mm x 600 mm x 760 mm.
286	REPAIR TO TEAPOY VERANDAHAll as per items No 263 above as applicable but for Gas welding to all broken joints of teapoy varandah including Cutting of worn out/broken legs of teapoy varandah and replace with new square MS pipe 1.6mm thick and supporting members as per and fixing with gas welding complete all as per specified and directed.(FD/E6/MAP/17 or FD-35(M),383,255)
287	All as per items No 286 above as applicable but for Spray painting to both inside & outside of whole body of teapoy varandah with two coat of synthetic enamel / hammertone paint in white / black or existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Gloss or equivalent as approved and directed by engr-in-charge including scraping and derusting wherever necessary and applying putty and making smoothening ofsurfaces complete before painting all as directed.
288	All as per items No 286 above as applicable but for Dismantling ofunserviceable top of Teapoy Varandah and providing new top for top of Teapoy Varandah size 900mm x 450mm , made of 18mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
289	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TEAPOY VARANDAH:All as per items No 272 above as applicable butfor Teapoy Varandah.
290	REPAIR TO TABLE BED SIDE (MAP):All as per items No 263 above as applicable but for replacement of Ply wood of back side of Table bed side with 6mm thick plywood BWR type Including hard wood stopper . (FD/E6/MAP/15(R))
291	All as per items No 290 above as applicable but for Gas welding to broken joints of TableBed side Steel Frame of 18mm square pipe.
292	All as per items No 290 above as applicable but for replacement of complete Table Bed side CRCA Steel Frame made of 18mm square pipe 18 gauge thickness .
293	All as per items No 290 above as applicable but for replacement of bottom drawers of table bed side made of 18mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item inccluding CP handles etc.
294	All as per items No 290 above as applicable but for replacement of top drawer of table bed side made of 18 mm thickBWR grade HDHMR board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item including CP handle.
295	All as per items No 290 above as applicable but for replacement of Top of table bed side made of 18mm thickBWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
296	All as per items No 290 above as applicable but for replacement of soft closing premium quality heavy duty telescopic channel SS of existing size and of best quality of make Ebco / Hettich or equivalent as approved by engr-in-charge.
297	All as per items No 290 above as applicable but for replacement of side of table bed side made of 18mm thickBWR grade HDHMR Board of make: Greenply/ Archidply/ Century Ply or equivalent as approved, pasted with 1.00 mm thick decorative laminate of make: Greenply/ Archid Ply/ Century Ply or equivalent as approved of duly approved shade and colour on one side and balancing white laminate on the other side, duly hot pressed by machine and bonded by strong adhesive resin as per trade practices with 2 mm thick PVC edging of Make- Rehau/ Pegasus/ Kynex or equivalent as approved shall be fixed on all sides with strong bonded chemical adhesive through hot pressed machine complete of size as per existing item.
298	All as per items No 290 above as applicable but for Replacement of rubber shoes with S & F new rubber shoe of superior quality of suitable size complete all as directed by Engr-in-Charge.
299	LABOUR & MATERIAL FOR COMPREHENSIVE REPAIR INCLUDING PETTY REPAIR AND FITMENT OF TABLE BED SIDE MAP:All as per items No 272 above as applicable butfor Table Bed Side MAP.
300	REPAIR TO TABLE CENTRE WITH GLASS TOP BRASS/STEEL :-Removing of unserviceable/broken glass top of table centre brass, Steel andS &F 10mm thick tinted toughened glass top as approved by engr-in-charge of existing size / shape or as per drg as directed and specified with cornor / edges of the top of table rounded and chamfered as shown in drawing including vacum rubber shoes for the top of legs and PVC shoes for the bottom of the legs complete all as per specified and as direction by Engr-in-charge.(TP)
301	Derusting, scraping, surface preparation of the metal frame of table centre brass / steel and polishing / buffing / painting as required as per existing drg or as directed by engr-in-charge.
302	MATERIAL & LABOUR FOR SURFACE PREPARATION & PAINTING :- M&L for scrubbing and derusting, denting of de-shaped portion and applying one coat of red oxide primer and over it two coat ofsynthetic enamel paint (spray painting) of approved colour or as per existing colour of make : Asian paints Apcolite Satin / Berger Butterfly / Nerolac High Gloss or equivalent as approved and directed by engr-in-charge incl preparation of surface by repairing dents, defects on surface by straightening, hammering , buffing, grinding, polishing etc and applying putty or POP to make the surface smoooth before painting woork etc all asdirected by Engr-in-charge including transporting , shifting , handling of furniture and equipment at the site and yard as required by contractors\" own arrangement for the following :-Rack side 3/4 space steel with tray / rack side steel(FD-1023,DB 13, DB 3123, TP)
303	All as per items No 302 above as applicable but for Rack Steel 6 tier Open / Close (FD- 1038,1038(M), FD-106)
304	All as per items No 302 above as applicable but for Rack Steel 900X450X2400mm / 6\" x 2\" x 6\" / 6\" x 2\" x 5\"/ Rack store steel / Rack Stationary Steel. TP,(FD-129,104)
305	All as per items No 302 above as applicable but for Rack Pigeon Hole Steel.(FD-106,1037)
306	All as per items No 302 above as applicable but for Chair Lobby 3 Seater steel with arms/ chair visitor 3 seater . (TP)
307	All as per items No 302 above as applicable but for StoolSteel 2\" / 510 mm height (FD-81,TP)

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Furniture Tenders

Furniture Items Tenders

Furnitures Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair/Maintenance Of Wooden Steel And Tp Furniture Items Including Painting And Polishing At Af Stn Bkt, Lucknow-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair/Maintenance Of Wooden Steel And Tp Furniture Items Including Painting And Polishing At Af Stn Bkt, Lucknow-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us