|
| 1 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 2 | Excavation in trenches n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 3 | Excavation in trenchesexc 1.5 m wide and n. exc 3.0 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in soft/loosesoil complete all as specified and directed. |
| 5 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed. |
| 6 | M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 7 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed. |
| 8 | M&L for Brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick wall in cement mortar 1:4 completeall as specified and directed. |
| 9 | M&L treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (500mm below the ground level) complete all as specified and directed. |
| 10 | M&L treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 11 | M&L treating the soil under plinth protection at the rateof 5 liters of emulsion per square metre of surface area complete all as specified and directed. |
| 12 | M&L treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:4onbrick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 14 | M&L for rendering 15mm thick Plaster on fair face of brick surface in cement mortar 1:6 onbrick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick in CM 1:3 on any faces of concrete surfaces finished fair and even without using extra cement in ceiling/ chajja on brick/stone walls completeall as specified and directed. |
| 16 | M&L preparation of newly plastered surfaceon walls and applying two coat of Oil Bound Distemper over a coat of primer and 3mm thick Puttycomplete all as specified and directed. |
| 17 | M&L three coats of white wash on newly plastered surfaces as in ceiling including preparation, complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of any description and applying two coats of cement base paintover a coat of primer complete all as specified and directed. |
| 19 | M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 20 | M&L for 100mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub floor; complete all as specified and directed. |
| 21 | M&L for sand filling thick under floors or in foundations including watering as requiredcomplete all as specified and directed. |
| 22 | M&L for 35mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in levelling course, complete all as specified and directed. |
| 23 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n. exc. 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement overand including15mm thick screed/bedding layer in CM (1:6), complete all as specified and directed. |
| 24 | M&L for glazed coloured ceramic tiles of size 450x350x7mm thick on vertical surfaces such as skilting/dado over 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 25 | M&L non skid ceramic tiles colored tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed. |
| 26 | All as per the description of srl item No 25 above but as a skirting in 10mm thick CM 1:6 |
| 27 | S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling ofplain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheetbeading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified. |
| 28 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and directed. |
| 29 | S&F rolled mild steel Framed work ~Fe-290 - (Gde-E-165) such as grills,gratings,etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, framework of water tanks and similiar works completeall as specifed and directed. |
| 30 | M&L preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 31 | Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etcwith rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed. |
| 32 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 33 | S&F 35mm thick 2nd class hardwood plain framed panelledshutters (any number of panels) with panels of timber flat on both sides(feathered edge), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed. |
| 34 | M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat ofprimer all as directed and specified. |
| 35 | S&F aluminium handle cast type anodized 150mm, complete all as specified and directed. |
| 36 | S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 37 | S&F aluminium anodized barrel tower bolts of extruded section of length 150mm and fixed with cadymium plated wood series, complete all as specified and directed. |
| 38 | S&F aluminium alloy anodized sliding door bolt 300mm with hasp staple, complete all as specified and directed. |
| 39 | S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, coiling or laid in floors of complete all as specified and directed. |
| 40 | S&F Aluminium fixed ventilator with following specifications:(i) outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut aluminium welded, welded shutter (01 nos) of size size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 1 Nos per shutter(ii) Entire window shall bepowder coated with pure polyster coat of any shade as approved by GE(iii) Window shall have provision forinstallation of Exhaust fan andprovn of window glass shutter and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in-charge.(iv) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. |
| 41 | S&F Aluminium window as per TD drg No. CEDZ/D-316 with following specifications:(i) outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut aluminium welded (ii) center mullion of size 40mmx65mm(iii) welded shutter (02 nos) of size size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter(iv) 12mm MS square bar safety grillat 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm MS square bar(v) Welded wire mesh shutter(02 nos) of size 40x18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet.(vi) Entire window shall bepowder coated with pure polyster coat of any shade as approved by GE(vii) Window shall have provision forinstallation of window AC/Desert Cooler andprovn of window glass shutter, wire mesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in-charge.(viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. |
| 42 | M&L for cutting chasses for concealed water tubing of 15mm dia and making good, complete all as specified and directed. |
| 43 | S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to wall, coiling or laid in floors of , complete all as specified and directed. |
| 44 | Supply only 10 Ltrs capacity PVC low level valve less flushing cistern (white) symphonic action type with all fittings such as inlet ball valve bloat and handle and flush pipe of polythene, complete all as specified and directed. |
| 45 | S&F in repair water closet squatting pan ``Orissa pattern`` 580 mmx440 mm, white with integral foot rests including fixing charges of flushing cistern, connection to trap, anti syphonage pipe and provn of lime concrete etc complete all as specified. |
| 46 | S&F 32mm dia Flush pipe of polyethylene of low or high density of PVC for low level cistern etc complete all as specified and directed. |
| 47 | S&F PVC connection 15mm dia 450mm long with brass coupling/unions on both ends suitable for flushing cistern and WHB, complete all as specified and directed. |
| 48 | S&Ffancy type, chromium plated, long body, bib taps, 15mm bore with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all specified and directed. |
| 49 | S&Fangle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. |
| 50 | S&Fvitreous china wash hand basin with stand white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia,brass chromium plated waste fittings etc complete all as directed and spcified. |
| 51 | M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement complete all as specified and directed. |
| 52 | S&F PVC water tanks 1000 ltr cap rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 53 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 54 | M&LRCC foundations, including rafts, footings, foundation beams; plinth beams; bases for columns,etc.; basement slabs, under-reamed piles and mass concrete uing type M-25 (Design mix) (using 20mm graded) stone aggregatecomplete all as specified and directed. |
| 55 | Formwork to sides of pillars, posts, struts, piers, columns and stanchionscomplete all as specified and directed. |
| 56 | M&LRCC in Columns, pillars, piers, posts and strutsuing type M-25 (Design mix) (using 20mm graded) stone aggregate complete all as specified and directed. |
| 57 | Form work to soffits of suspended slab such as roof slabs, floor slabs and similar work; n. exc 200mm thick (horizontal or sloping) complete all as specified and directed. |
| 58 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders bressummers, lintels, cantilvers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc. |
| 59 | Form work to edges of concrete flats, floor and roofs n. exc 20 cm wide horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 60 | Mild steel bars(TMT) 10mmdia and over cut to length, bent to shape required including cranking, bending spirally for hooking for columns hooking ends and binding with and for and including MS wire (annealed) not less than 0.9mm dia. |
| 61 | All as per the description of srl item No 60 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 62 | M&L RCC slab supported on walls , beams & colmns etc asin roof & the like using M-25 (Design mix)using 20mm stone aggregate complete all as specified and directed. |
| 63 | M&L RCC in chajjas & the like using M-25(Design mix)using 20mm stone aggregate complete all as specified and directed. |
| 64 | M&LRCC inbeams, cantilivers, bressummers, lintels over 1.5 mtr span using type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified and directed. |
| 65 | Formwork to staircases with sloping or stepped soffits including risers and stringers excluding landing complete all as specified and directed. |
| 66 | M&LRCC instairways including steps but excluding landing using type M-25 (Design mix) (using 20mm graded) stone aggregate complete all as specified and directed. |
| 67 | M&L for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 68 | S&F 600mm x 450mm bevelled edge looking mirror of selected quality glass mounted on 6mm thick commercial ply wood and fitted to wooden plug, complete all as specified and directed. |
| 69 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified and directed. |
| 70 | S&F inPVC (SWR) bends any radius bore 75 mm. |
| 71 | M&L PVC (SWR) 75mm floor trap with grating including jointing to waste pipe fixed in solvent cement complete all as specified and directed. |
| 72 | S&F PVC 110mm (SWR) junction single(single T) complete all as specified and directed. |
| 73 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 74 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified. |
| 75 | S&F vitreous china urinal, half stall type, white (back wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. |
| 76 | S&F 32mm dia PVC waste pipe for WHB and Urinal with union completeall as specified and directed. |
| 77 | S&F CP soap dish fixed to wall with suitable rawl plug complete all as specified and directed. |
| 78 | S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed. |
| 79 | S& F20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipeand fixed. (Minimumweight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) ® |
| 80 | M&L for 15mm thick cement plasterover the concrete / brick roof surfacesin cement mortar 1:4mixed with liquid water proofing compound@ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed.Note :- Water proofing additive shall be measured and paid separately. |
| 81 | M&L 20mm Gun metal globe of gate valve with iron wheel head, screwed both ends of size complete all as specified and directed. |
| 82 | S&F 15mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. |
| 83 | S&F 15mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 84 | M&L cement concrete type B0 (1:2:4) using 12.5mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 85 | M&L for machine pressed precast concrete interlocking payer block any shape and size confirming to IS -15658-2006 of 60mm thickness (M-35 Grade) with grey cement and no pigment all as specified and directed. |
| 86 | PCC 1:4:8 type D-2 as in sub base of flooring 75mm thick complete all as specified and directed. |
| 87 | M&L for 150mm bore (internal dia) DWC Pipe, laid in trenches and jointed with rubber joint and tested complete all as specifiedand directed. |
| 88 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and completely surrounding pipe with concrete of 150mm bore DWC pipe after they are laid and tested complete all as specified and directed. |
| 89 | M&L brick work with sub class B bricks straight or curved on plan built in circular well steining (any radius) constructed from the base or curb laid dry complete all as specified and directed. |
| 90 | M&L for brick work with old size sub class \"B\" bricks straight or curved on plan exc 6 m mean radius builtin CM 1:4 complete all as specified and directed. |
| 91 | M&L for Loose filling with broken bricks of guage 80 to 150mm in soakage pits, soakage wells complete all as specified and directed. |
| 92 | M&L RCC slab supported on walls , beams & colmns etc asin roof & the like using M-30(Design mix)using 20mm stone aggregate complete all as specified and directed. |
| 93 | Mild steel bars (TMT) 10mmdia and over cut to length, bent to shape required including cranking, bending spirally for hooking for columns hooking ends and binding with and for and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 94 | M&L for providing PCC 1:2:4 type B-0 (using 12.50mm garded crushed stone aggregate) as in benching, surface channel of drain complete all as specified and directed. |
| 95 | S&F precast fibre reinforced cement concreteManhole cover(Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x 1000mm x 80mm complete all as specifiedand as directed. |
| 96 | M&L for rendering 15mm thick in CM 1:4 on concrete/brick wall surfaces (internal surface of man hole) finished even and smooth with using extra cement and WPC complete all as specified. (WPC paid separately) |
| 97 | Supply only liquid water proofing compound complete all as specified and directed. |
| 98 | M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- |
| 99 | One light point controlled by one switch complete all as specified and directed. |
| 100 | Oneceiling/exhaust fan point controlled by one switch complete all as specified and directed. |
| 101 | One socket outlet 5 Amps controlled by one switch on same board complete all as specified and directed. |
| 102 | One socket outlet 5 amps controlled by one switch on independent board complete all as specified and directed. |
| 103 | All as per the description of srl item No 1 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire complete all as specified and directed. |
| 104 | S&F lamp holder, 230 volt AC, PVC / Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb, 6500 K complete complete all as specified and directed. |
| 105 | S&F ceiling rose, 6 Amps, 250 volts, ACwith three terminals and PVC / Polycarbonate insulated body of 50mm x 25mm sizecomplete all as specified and directed. |
| 106 | S&F modular switch 6/10 Amps, one way, one module 240 volts complete all as specified and directed. |
| 107 | S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete all as specified and directed. |
| 108 | S&F modular switch 16 A, 1 module,240 volts complete all as specified and directed. |
| 109 | S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete all as specified and directed. |
| 110 | S&F electronic fan step regulator flush switch type 100/120 watt, 230 Volt complete all as specified and directed. |
| 111 | M&L in for two single core (submain) PVC insulated cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia or higher size, concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and directed. |
| 112 | S&F MCB DB, single pole and neutralwith 200 Amps rated bus bar, 230 volts, glazed,double door type, IP-43,including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following no of way :- |
| 113 | 8 way |
| 114 | S&F MCB DP/SPN, 240 Volts, AC of breaking capacity 10 KA,\"C\" curve and connections by using suitable copper lugs complete of following rating :- |
| 115 | 40 Amps |
| 116 | S&F MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, \"C\" curve and connection by using suitable copper lugs complete all as specified and directed. |
| 117 | S&L in replacement or fixing or passing through pipe, 1100 volts gradePVC insulated aluminium stranded conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circuler for the following size of cables :- |
| 118 | 10 Sqmm |
| 119 | S&F in wall mountedLED batten with aluminium housing and integrated electronic drive18/20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. |
| 120 | S&F in surface and wall mounted LED batten 10 watt 2 feet longextruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. |
| 121 | S&F in exhaust fan 200mm sweep, 230V, AC, plastic body with louver shutter etc complete and connection from ceiling rose to fan terminal incl cutting of hole at wall for required size and making good disturbed surface and depositing old fan to store yard complete all as directed(make:Havells,Crompton,Usha) |
| 122 | M&L for earthing with Galvanised Steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by using GI wire of size 4mm dia as earthing lead(upto the body ofthe equipment) by means of GI bolts, nuts, check nuts and washers and thimbles and protected by light grade 40mm diaGI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6)type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type ofsoil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 ofSSR 1991(Part-I) complete |
| 123 | S&F electric water heater, storage type 25 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed . |
| 124 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as directed |
| 125 | 300 watt motorised revolving LED search light with Speed Control Up-Down Control & On-Off control of light through remote,Wattage: 150W TO 400W, Input Voltage : 230 VAC, Power Factor : HPF 0.987,Operating Current of LED Bread : 1500 mA Cont. current Driver,IS16106,Beam Angle : 5-9 degree Mounting : 360 degree Rotational |
| 126 | S&L jointing & testing of GI Pipe, medium grade, including all fittings in old/new position, laid in trenches/ wallincluding taking down the old/unsv pipe line complete all as specified & directed of following sizesNote:-Excavation and earth work shall be measured and paid separately under respective items of schedule. |
| 127 | 25mm dia |
| 128 | 20mm dia |
| 129 | S&F in repair heavy duty Brass forged Ball valve, screwed down high pressure 25 Kg/Cm2 with iron handle, screwed both ends complete for the following sizes of pipes:- |
| 130 | 20mm dia |
| 131 | S&L sub class \"B\" bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed. |
| 132 | M&L for sand cushioning for protection of cable with screen wash river sand complete all as specified and directed. |
| 133 | Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size Note:- Excavation & earth work, sand cushioning, bricks protection & GIpipe where required shall be measured & paid seperately:- |
| 134 | 16 Sqmm 4 core |
| 135 | 35 Sqmm 3.5 core |
| 136 | Making hole below the road by drilling machine or hand drill without damaging road for inserting pipe upto 80mm dia complete all as specified and directed Note:- GI pipe shall be measured & paid separately. |
| 137 | M&L for LED Flood Light luminaire, energy saving & enviornmental friendly, long lifediecast aluminium, IP65, with high power LED as light source incl necessary fixing arrangement with clamps of suitable size and connectionusing 1.5 Sqmm PVC insulated copper cable complete all as directed for following wattage. |
| 138 | 70 Watt |
| 139 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to galvanised earth lead wire 4mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade,funnel with wire mesh, 50mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm MS bars at 150mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete |
