|
| 1 | Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out insoft/loose soil complete all as specified and as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed. |
| 3 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed. |
| 4 | Removing excavated material soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. Note:- The Contractor shall remove debris /soil and to remove outside the MoD land. |
| 5 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 6 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Note:- The Contractor shall remove debris /soil and to remove outside the MoD land. |
| 7 | Takingdowncementplasteron brick or concretewall surfaces etcincluding rakingoutjoints, hacking for keys, scrubbing down withwateretc. complete all as specified and as directed. Note:- The Contractor shall remove debris /soil and to remove outside the MoD land. |
| 8 | M&L for brick work with sub class B works, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all specified and as directed. |
| 9 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan, exc 6m mean radius, built in CM (1:4) complete all as specified and as directed. |
| 10 | M&L for PCC (1:3:6) type C2(using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 11 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped etc complete all as specified and as directed. |
| 12 | M&L for 15mm thick rendering of Ready mix mortar of approved make on brick/ concrete surfaces on external walls,fascia, parapet and chajjas finished the surfaces even and fair without using extra cement includingwater proofing compound by weight as per manufacturer\"s instructions, including necessaryscaffoldingup to (G+3 storey) complete all as specified and as directed. |
| 13 | M&L for Matte & glosss finished tiles as on vertical surfaces of size (450 x 300)mm x 8 to 10mm thick / (600 x 300)mm x 8 to 10mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including over 10mm thick rendering with CM (1: 4) as on vertical surfaces complete all as specified and as directed. |
| 14 | M&L for 18 to 20mm thick granite (jet black) work (table rubbed and polished ) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note:- Exposed edges to make half round shall be deemed to be included in unit rate. |
| 15 | M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) asin walls, beams, columns, roofs, landings balconies, footing, including necessary use and waste of form work complete all as specified and as directed. |
| 16 | M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in fascia, louvers, parapets, railing and chajjas and the like ncluding necessary use and waste of form work and scaffoldingup to (G+3) storey complete all as specified and as directed. |
| 17 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | Description all as per ser item No. 17.00 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and as directed. |
| 19 | Excavation in post holes each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with around earth in layers not exceeding 25cm thick, watering and removing surplus spoil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 20 | S&F steel work in tubular/square/rectangular hollow section/angle iron, tee etc. fortrusses/ purlins & rafter including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, Grade YST 310 including necessary machinery for upto 10m height structure complete in all respect complete all as specified and as directed. |
| 21 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars complete all as specified and as directed. |
| 22 | M&L for expanded metal, not exc 4 kgs and cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed. |
| 23 | S&F 0.50mm thick Pre-painted galvalume aluminium Zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self taping screws complete all as specified and as directed. |
| 24 | M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in floor etc complete all as specified and as directed. |
| 25 | M&L for glossy finish coloured chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, set, jointed andpointed in neat cement slurry as in floor with and including over 20mm screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 26 | M&L for heavy duty digital parking tiles of size (30cm x 30cm) x 8 to 10 mm thick, set, jointed andpointed in neat cement slurry as in floor with and including over 20mm screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 27 | M&L for precast cement concrete louvers and jallies, 55mm thick (measured solid) in PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) set in cement mortar (1:4) including all mouldings but excluding frame complete all as specified and as directed. |
| 28 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed. |
| 29 | S&F MS angle iron as in fencing posts, struts & \"Y\" angle holes drilled in for securing wire including cutting top to shape & with flat iron for securing wire mesh including all necessary drilling, bolting or riveting, weldings etc Fe-290 grade 165 complete all as specified and as directed. |
| 30 | S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n exc 5cm long dia of shank 5 to 10mm complete all as specified and as directed. |
| 31 | S&F mild steel round bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hopping for colours hooking ends and binding with a including security bolts post and struts in fencing including cutting top to shape as directed drilling holes, notching for wire etc., complete all as specified and as direcetd. |
| 32 | Suply only chain link MS galvanised fencing of mesh size 50mm square with 10 gauge wire and not less than @2.80Kg per Sqm complete all as specified and as directed. |
| 33 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 34 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 35 | M&L for preparation of newly plastered surfaces of walls and applyingtwocoatsofexterior emulsion paint over one coat of primer over 2mm thick (avg thickness) cement base wall care putty complete all as specified and as specified. |
| 36 | M&L for complete removal of existing treatment of old decorated external surface of walls by electrically operated grinder including necessary scaffolding complete and applyingtwocoatsofexterior emulsion paint over a coat of primer of same brand over 2mm thick (avg thickness) cement base wall care putty to obtain even and smooth surfaces including preparation of surfaces complete all as specified and as directed. |
| 37 | M&L for preparation of new steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 38 | M&L for painting of new steel surfaces of any description not otherwise described n. exc 10cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer finished with two coats of synthetic enamelwhen unconnected with other painting or when painted in different tint complete all as specified and as directed. |
| 39 | M&L for rendering 15mm thick in CM (1:4) on brick/ concrete surfaces of walls, finished even and faircomplete all as specified and as directed. |
| 40 | M&L for factory made precast cement concrete kerbs stone of PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) of any shape and size including chamfered angles, weathering or singly round throating etc including setting and jointing in cement mortar (1:4), including necessary formwork complete all as specified and as directed. |
| 41 | M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, conforming to IS 15658-2006 of 60 mm thickness, M-35 grade glossy finish including 25mm thick sand cushioning complete all as specified and as directed. |
| 42 | M&L for applying two coat of synthetic enamel paint on old and new concrete surfaces of any description over 10cm girth or width over a coat of primer including necessary preparation complete all as specified and as directed. |
| 43 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed. |
| 44 | Excavation over area n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 45 | Excavation over area exc 1.5 m but n exc 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 46 | Excavation over area exc 3.0 m but n exc 4.5 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 47 | M&L for brick works with sub class ‘B’ bricks old size in one brick thick honey comb walling built in CM (1:4) complete all as specified and as directed. |
| 48 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundation/mass concrete complete all as specified and as directed. |
| 49 | M&L for precast cover slab in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) set in CM (1:4) including necessary use and waste of form/ moulds etc complete all as specified and as directed. |
| 50 | M&L for cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in surface channels and drains/ coping complete all as specified and as directed. |
| 51 | Supplying and laying 150mm bore reinforced cement concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed. |
| 52 | M&L for PCC (1:3:6), type C-2, (using 40mm graded stone aggregate) as in concrete bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes, after they are laid and tested complete all as specified and as directed. |
| 53 | M&L for 15mm thick rendering onbrick or concrete wall surfaces in cement mortar (1:6), finished even & smooth without using extra cement complete all as specified and as directed. |
| 54 | M&Lfor5mm thickcement plaster in cement mortar (1:3) as on ceiling & plastering to be finished even & smooth without using extra cement complete all as specified and as directed. |
| 55 | M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) mixed with water proofing compound complete all as specifified and as directed. Note:- Water proofing compound shall be measured & paid separately under supply only item. |
| 56 | M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor etc complete all asspecified and as directed. |
| 57 | M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour with and including over 10mm thick screed bed with CM (1: 4) complete all specified and as directed. |
| 58 | M&L for 100mm thick cement concrete (1:4:8) type D2, (using 40mm graded granite stone aggregate) as in sub base including use and waste of form work complete all specified and as directed. |
| 59 | M&L for hardcore gauge n.exc 63mm of broken stone or boulders deposited, spread and levelled in layers n.exc 75mm thick, watered and well rammed to a true surface complete all as specified and as directed. |
| 60 | M&L for 75mm thick PCC (1:3:6) type C2 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25and sand inthe proportion of (1:3 ) by weight complete all specified and as directed. |
| 61 | Use and waste of formwork to soffit of slabs etc n. exc 200mm thick, flat, rough finished surfaces complete all as specified and as directed. |
| 62 | M&L for 75mm bore cast iron soil waste/ and vent pipe in any length with or without ears with cement joints fixed to walls complete all specified and as directed. |
| 63 | M&L for CI vent cowl 75mm bore complete all specified and as directed. |
| 64 | M&L for 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 65 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 66 | S&F 110mm PVC (SWR) WC connector bent type complete all as specified and as directed. |
| 67 | S&F PVC (SWR) junction single (single \"T\") equal or unequal 110mm bore complete all as specified and as directed. |
| 68 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete in all respect as specified and as directed. |
| 69 | S&F PVC (SWR) 75mm dia bend complete all as specified and as directed. |
| 70 | S&F 15mm bore of tubes medium grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting of chasing etc complete all as specified and as directed. |
| 71 | S&F 20mm bore of tubes medium grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and as directed. |
| 72 | S&F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and as directed. |
| 73 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) three layered white colour including two GI tank nipples one at inlet and other at one outlet of 20mm dia, anti mosquito cap complete all as specified and as directed. |
| 74 | S&F wash hand basins, vitreous china of size (550 x 400)mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in red lead cement,PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and as directed. |
| 75 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 76 | S&F PVC valveless, syphonic action type, low level, dual flush cistern, of capacity 10 lit, white, with inlet ball valve, float and handle including brackets & flush pipe of polyethylene complete all as specified and as directed. |
| 77 | S&F 15mm bore diaCP finish, bib taps, cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and as directed. |
| 78 | S&F 15mm bore diaCP finish, angle valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferruleincluding cup washer/flange complete all as specified and as directed. |
| 79 | S&F vitreous china wash down water closet Pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and as directed. |
| 80 | S&F 75mmPVC (SWR) floor trap, plain with grating including jointing with solvent cementfloor trap complete all as specified and as directed. |
| 81 | Supply only integral water proofing compound complete all as specified and as directed. |
| 82 | M&L for loose filling with broken brick aggregate of gauge 80 to 150mm in soakage pits and soakage well etc. complete all as specified and as directed. |
| 83 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 84 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing complete all as specified and directed. |
| 85 | S&F 75mm size butt hinges medium weight, cold rolled mild steel (ISI marked)complete all as specified and directed. |
| 86 | S&F aluminium handle cast type anodised 150 mm size(ISI marked)complete all as specified and directed. |
| 87 | S&F aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed. |
| 88 | S&F pre- painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bituminous washer complete all as specified and as directed. |
| 89 | M&L for preparing new plastered surfaces andapplying two coats of oil bounddistemper over a coat of primer complete all as specified and as directed. |
| 90 | M&L forpreparation of newplastered surfaces of ceiling surface and applyingtwocoats of oil bounddistemper over a coat of primer complete all as specified and as directed. |
| 91 | M&L for preparation of newly plastered surfaces of walls and applyingtwocoatsofexterior emulsion paint over a coat of primer complete all as specified and as directed. |
| 92 | S&F steel work in tubular/square/rectangular hollow section/angle iron, tee etc. for structural trusses including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, Grade YST 310 including necessary machinery for upto 10m height structure complete all as specified and as directed. |
| 93 | M&L for plaincement concrete tiles (30cm x 30cm) x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cutand polished on roofover and including 10 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 94 | M&L for preparation of plastered/concrete surfaces ofroof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:-(a) Plastering 10mm thick in cement mortar (1:4) on concrete surfaces using WPC @3% by weight of cement, finished even and smooth(b) Surface shall be thoroughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consistingof a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.(d) Membrane bonded completely to the substrate & the overlaps are then scaled/fused by flame. |
| 95 | S&F vitreous china wash hand basin coloured of oval tiffany shape minimum of size 550mm x 400mm, bottle trap chromium plated heavy duty 32 mm dia, PVC connection of 15mm dia & 450mm long with PTMT nuts, 15mm bore basin mixer long swan neck chromium plated high pressure with high pressure and 32mm dia brass waste fitting complete all as specified and as directed. |
| 96 | S&F in repairs vitreous china squatting pan, \"Orissa\"pattern, size (580 x 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, anti syphonage pipe joint and to socket or stopper, including flush pipe with all fittings etc complete all as specified and as directed. |
| 97 | S&F vitreous china coloured wash down water closet pan cristy one piece EWC, including ‘P’ or ‘S’ trapand connection to drain & to flushing pipe, coloured seat cover, coloured 10 litres capacity low level flushing cistern super water saver dual including cast iron brackets and brass CP flush pipe long band, and mild steel chromium plated or aluminized hinging devices and 15mm dia Jet spray straight with CP tube 1 mtr long etc complete set and provision of concrete bedding complete all as speicified and and as directed by Engr-in-charge. |
| 98 | S&F in repairs low level flushing cistern 10 ltrs capacity, and connections to pipes and fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, low level, white with inlet, including cast iron brackets complete all as specified and as directed. |
| 99 | S&F Plantex Ceramic Premium Wall Mount Large Urinal Pot(White, Loki) white or coloured with grating and unionfor discharge throughbottle trap chromium plated heavy duty 32 mm dia, PVC connection pipe of 15mm dia & 450mm long with steel nuts, 15 mm diaangular stop cock long lever brass chromium plated with high pressure and 32mm dia brass waste fitting and including chromium plated spreader etc complete all as specified and as directed. |
| 100 | S&F curved shaped urinal partition size 900 mm x 450 mm of frosted glass 12 mm thick wall mounted fixed with steel bracket min 3 Nos complete all as specified and as directed. |
| 101 | Supply and fixingin replacement Telephone socket outlet modulartype ISI marked with valid CML No. complete with sunken boxes, cover plates etc complete all as specified and as directed. Make:- Legrand Model- 572322 or equivalentof approved make. |
