|
| 1 | M&L for apporved soild filling in floors or pavings, open area laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering and consolidation complete all as specified and directed. |
| 2 | M&L for Hardcore of broken stones gauge not exceeding63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 3 | Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc and getting out in any type of soil complete all as specified and directed. |
| 4 | Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc and getting out in Soft/disintegrated rock complete all as specified and directed. |
| 5 | Excavation over areas n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed. |
| 6 | Excavation over areas exc 1.5 m and not exc 3.0m deep and getting out in soft/disintegrated rock complete all as specified and directed. |
| 7 | Returning filling tn, incl spreading, levelling, watering and well ramming in layer not exc 25 cm in each layer complete all as specified and directed. |
| 8 | Removing surplus excavated soil to a distance not exc 50 Mtr & depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 9 | M&L for Brick work with sub class \"B\" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6),(up to two story Bldg) complete all as specified and directed. |
| 10 | M&L for Brick work with sub class \"B\" bricks , straight or curved on in half brick thick wallbuilt in cement mortar (1:4),(up to two story bldgs) complete all as specified and directed. |
| 11 | M&L for cement concrete 1:4:8type D-2 (40mm graded stone aggregate)as in sub base , and mass concrete complete all as specified and directed. |
| 12 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed. |
| 13 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 14 | Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.Note : For adjustment of rate only against item No 13.00 here-in-before |
| 15 | S&F precastfactory made reinforced rectangular manhole/drain coverwith or without hole of size 1200mmX500mmX75mm thick, confirming to IS: 12592 and IS:1726, factory madecomplete all as specified and directed by Engr-in-charge. |
| 16 | Supply, laying & jointing in position of reinforced concrete pipes of 600 mm bore pipes, class NP 2, laid and jointedwith collars including taking out/ down old unservicable pipe complete all as specified and directed. |
| 17 | Supply, laying & jointing in position of reinforced concrete pipes of 300 mm bore pipes, class NP 2, laid and jointedwith collars including taking out/ down old unservicable pipe complete all as specified and directed. |
| 18 | M&L for 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately as supply only.) |
| 19 | Supply only liquid water proofing compound as per manufacture instruction complete all as specified and directed. |
| 20 | S&F PVC reinforced plain sheet for with approved profile and 2 mm thick of any colour as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or sub floors or path complete all as specified and directed. |
| 22 | M&L for Sand filling under floors or path or in foundations including watering and consolidation complete all as specified and directed. |
| 23 | M&L for machine vibrated precast concrete interlocking paver/ tiles (glazed finish) with PU finished of any shape, any size, confirming to IS 15658-2006 of 80 mm thick and M-40 grade complete all as specified and directed. |
| 24 | M&L for cement concrete chequered PU coated tiles 300x300x25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 25 | M&L for Cement concrete 40mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) in floors pavings etc finished even & smooth with out using extra cement complete all as specified and directed. |
| 26 | M&L for Cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement, complete all as specified and directed. |
| 27 | M&L for providing PCC 1:2:4 type B1 (using 20mm garded stone agg) as in coping PCC block etc complete all as specified and directed. |
| 28 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition complete all as specified and directed. |
| 29 | M&L for reinforced cement concrete (nominal mix) Type A1 of 1:1 1/2:3 (20mm graded crushed stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, floor, balconies, canopies, step, stair, column, deck slabs and in shelves and the like complete all as specified and directed. |
| 30 | M&L for TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars complete all as specified and directed by Engr in charge. |
| 31 | M&L for TMT bars 5 mmdia upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips includingU-shaped stirrups with necessary welding required at site complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for trenchless excavation my mechanical process without disturbing road/top surface for taking out any type of soil/rock of any sizes to laying 150mm to 300mm bore sewage pipe upto depth of 3.0 mtr complete all as specified and as directed. Note : (a) Cost of transportation of trenching machine included in this rate (b)Cost of returning & refilling and removal of extra soil deemed to be included in this rate and nothing extra paid on this account. |
| 33 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pilasters, buttresses, etc.; vertical or to better, fair finishes complete all as specified and directed. |
| 34 | Formwork to sides and soffits of floor or roof beams, beam haunching,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 35 | M&L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, frames, trass, pole, barred iron doors, ladders,framed balusters,walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 36 | M&L for galvanized hot rolled iron welded square mesh of size 50x50 and 2-3mm dia fixed welded to MS frame workcomplete all as specified and directed. |
| 37 | M&L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed. |
| 38 | M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 39 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 40 | M&L for vertifeid coloured tiles 10 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 41 | All as per item No 40.00 but in vertical surface as skirting/dado including 10mm thick rendering as backing in CM 1:4 complete all as specified and directed. |
| 42 | M&L for Glazed degital ceramic tiles of approved colour and design in vertical surfaces600mmx300mm/450x300mm including provision of high lighter tiles/boarder and jointed in neat cement slurryand pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 43 | Dismantling of stone slab and tiles of any description or thickness in floors, apron, laid, dry and pointed complete all as specified and directed. |
| 44 | M&L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in floor, and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20 mm thick in cement mortar 1:6 complete all as specified and directed. |
| 45 | M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 46 | M&L for HDPE Black DWC Sewerage and Drainage Pipe 150 mm in trenches and jointed with using ruber gaskit and pipe joint lubricant for both end and 150 to 200 mm wide color joint socketshll be provided to cover the joint all around as per specefication and manufacture insturction complete all as specified and directed. |
| 47 | M&L for HDPE Black DWC Sewerage and Drainage Pipe 300 mm in trenches and jointed with using ruber gaskit and pipe joint lubricant for both end and 300 to 350 mm wide color joint socketshll be provided to cover the joint all around as per specefication and manufacture insturction complete all as specified and directed. |
| 48 | M&L forPCC 1:3:6 type C2 (using 40 mm graded stone aggregate) concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm/160 mm bore pipes complete all as specified and directed. |
| 49 | S&F 4-5 mm thick ACP plain sheet in verious colour for exterior use including aluminium frame workwith clits, screwwith with MS frame 25x25x1.5mm thick @ 600x600mm complete all as specified and directed.Note: (a) Srl Item No 09.00, 11.00, 12.00, 15.00, 18.00 to 25.00, 27.00, 29.00, 30.00, 35.00, 40.00, 42.00, 46.00 & 49.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
