|
| 1 | M&L for complete removal of existing water proofiing treatment from top of roof (flat of sloped) and canopies / chajjas of building including demolition of PCC any thickness and removal of debries out side Md land completer all as specified and directed. |
| 2 | M&L Water proofing treatment on \"Non approachable / non accessible and approachable roof\" surface (Horizontal, sloped& Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment,properly cleaning & drying the concrete surfaces complete(i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm.(ii)Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.(iii) Laying /unrolled over the bitumen coated surface, APPbasedpolymericmembraneminimumweighing3kg/sqmandminimum3mmthickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm)land on primed surfaceby forced application complete all as specified with 100 mm over laps shall be sealed by flame as per manufacturers instruction.(iv)Applying two coats of bituminous aluminium paintincluding preparation complete. |
| 3 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding / kerbs / sunken slab etc complete all as specified and directed. |
| 4 | M&L 10 mm thick rendering on roof surfaces / concrete surface in CM 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) complete all as specified and directed. |
| 5 | Supply only integral water proofing compound of approved brand/make. |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 7 | Dismantling of floor,hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | M&L for 50mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as levelling course laid and compacted in slope, in floor including rough finished with out using extra cement. complete all as specified and directed. |
| 9 | M & L for Virified Ceramic tiles 10 mm thick light shed (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 10 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles complete all as specified. |
| 11 | M & L for Glazed ceramic colouredtilesin vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointedin neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:3 complete allas specified. |
| 12 | M&L for suspended false ceilling comprising of 4 mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling of wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets.complete all as specified |
| 13 | Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed by Engr-in-charge. |
| 14 | Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to storecomplete all as specified and directed by Engr-in-charge. |
| 15 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing. |
| 16 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 17 | S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm. |
| 18 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as spd. |
| 19 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 20 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion all as specified and as directed. |
| 21 | S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixingstainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description complete all as specified. |
| 23 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 24 | S&F aluminium anodised grill of 7.00mm dia square, rectangular, triangular and circular shape aperture n. exc 7 cm in length or width fixed with H or F channel complete all as specified and directed |
| 25 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified including dismantlingAsbestos cement sheet ( corrugated, semi corrugated etc) in roof covering |
| 26 | S&F for MS framed works as intrusses, purline, rafters, post, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried omplete all as specified and as directed.Fe-410 gd 250 |
| 27 | M & L for preparation of newpainted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) over red oxidecomplete all as specified and directed by Engr-in-Charge. |
| 28 | Hacking out old glass (any thickness,size,quality or description)from wooden frames or stone,concrete or brick surrounds ,glazed with putty or fixed with beads complete all as specified and as directed. |
| 29 | Supply and Fix plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge. |
| 30 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc. |
| 31 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed. |
| 32 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed. |
| 33 | Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specifiedand directed . |
| 34 | Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specifiedand directed . |
| 35 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store all as specified and directed. |
| 36 | Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store all as specified and directed. |
| 37 | S&F500 Ltrs capacity PVCRotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top)double layer hoisted and fixed in position all as specified. |
| 38 | S&F1000 Ltrs capacity PVCRotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top)double layer hoisted and fixed in position all as specified. |
| 39 | S&F in repair ball valve/float ballhigh pressure of PTMT 20mmwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed. |
| 40 | S & F in repairs bib taps 15mm diafancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 41 | S & F in repairs 15mm dia stop valves / angle cockfancy type chromium plated, screwed down,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 42 | S & F in repairs15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 43 | S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. |
| 44 | Supply and fixed (in repair) PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified. |
| 45 | S & Fin repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc complete all as specified and directed. |
| 46 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 47 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed. |
| 48 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall all as specified and directed. |
| 49 | S & F in repairs 20 mm dia brass chromium platedtubular towel rail, D type, 60cm long between flanges complete all as specified and directed. |
| 50 | S & F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size915mmx460mm with bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 51 | S&F repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 52 | S&F for in repair Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 53 | S&F in repairs mild steel, chromium plated curtain rod 20mm dia with holder/bracket, stops, rollers etc. |
| 54 | S & F in repairs Health faucet (ABS Body) mild steel CP 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl fixed in position complete all as specified and directed. |
| 55 | S&F in repairs stainlesssteel toilet paper holder fixed with wooden gutties and screws to wall surfaces. |
| 56 | S&F in repair C.P. grating 100mm square/round with or without hole. |
| 57 | S&F in repair PVC waste pipe for wash hand basin/shink etc, 32mm dia and80 cm long plain pipe, complete all as specified. |
| 58 | S&F in repair of cabinet mirror of selected quality glass, mounted pvc board including shelf assembly. |
