Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for Trial bore of 200 mm dia up to 200 m depth below ground level in any kind of soil strata including hard stone/boulder, using rotary or percussion drilling, including electric logging, MS cap, MS flat iron clamps, reducing socket, and all necessary accessories, complete as specified and directed by the Engineer-in-Charge |
| 2 | Development of trial bore by reaming in following step:- (a) Reaming of bore up to 675 mm diameter for 60 RM from ground level, including provision and use of casing pipe 350 mm dia, 8 mm thick of mild steel, and filling with pea gravel, complete with all necessary tools, accessories, and supervision,complete as specified and directed by the Engineer-in-Charge |
| 3 | (b) Reaming of bore up to 525 mm diameter from depth exceeding 60 m up to 200 m, including provision and use of casing pipe 250 mm dia, 8 mm thick of mild steel, and filling with pea gravel, complete with all necessary tools, accessories, and supervision,complete as specified and directed by the Engineer-in-Charge |
| 4 | S & FFixing MS reducer, bail plug, well cap, MS strip for centering, MS iron clamps, electric logging and sample strata box complete as specified and directed by the Engineer-in-Charge |
| 5 | S & F MS slotted pipe of size dia 200 mm slot size 0.75 mm wide and 5 mm long ,wall thickness of pipe 8 mm and max length of pipe 6 mtr beveled ends in built welded complete as specified and directed by the Engineer-in-Charge |
| 6 | M & L for carrrying out electro logging test manual test upto complete drilling depth of tube well for fixing water strata and submitting of Report including its interretation by a qualified Hydroplogist/ground water expert complete as specified and directed by the Engineer-in-Charge |
| 7 | M&L for Developing of tube well by means of 265 cfm air compressor untill sand free clear potable water up to 10 PPM is obtained and test by using diesel engine driven turbine pump is get max yield and discharge measured by V-notch incl supply of yield test resultcomplete as specified and directed by the Engineer-in-Charge |
| 8 | M&L for packing pea gravel of size 2 to 4mm to be designed as per strata of bore well of natural shape brought direct form Haldwani (UK) and packing around the casing pipe of mild steel to entire depth upto ground level complete all as speicified and directed. |
| 9 | Supply and lowering of new submersible pump set 55 m nominal head capacity 67qm/hrs electric driven coupled with 3 phase electric motor not less than 25 HP with all accessories including GI Flanged, reducer, Nipple, heavy duty coloum pipe 100 mm bore flanged type 3 mtr long with 08 No. nut bolt washer and rubber insertion sheet gasket for jointing including MS clamp with nut bolt 2 No. GI rope of suitable size complete along with all accessories as directed by Eng-in- charge Make: KSB/ Calama/Crompton Greaves. (Column pipe and accessories with fixing material will be measured and paid separately).complete as specified and directed by the Engineer-in-Charge |
| 10 | Supply, fixing and jointing PVC insulated 3 core flat copper submersible cable of 10 sqmm size 1100 volt grade heavy duty including necessary jointing with existing cable and connections complete all as specified. Make : Plaza/Finolex/Richa/Fort Gloster. complete as specified and directed by the Engineer-in-Charge |
| 11 | Supply and laying of DI Pipes K-9, 150 mm dia, with flanged joints, ISI marked, including necessary gaskets, bolts, nuts, and all accessories, complete in position as specified and directed by the Engineer-in-Charge. |
| 12 | M & L for D I fitting for flanged pipe such as bend (any type radius and angle) taper any type, (straight bends, increasing, decreasing or double socket etc.)for 150 mm bore DI pipe complete in position as specified and directed by the Engineer-in-Charge. |
| 13 | Supply lowering and fixing MS column pipe 100mm bore 3 meter long 6.35 mm thick, ERW steel pipe both end flanged, threading,welding and drilling of holes, cutting of ducts of size 10 mmX20 MM 2 No. in each flange complete all as specified including rubber gasket of suitable size, Nuts,bolts and washer including making all type of connection as per site requirmentcomplete as specified and directed by the Engineer-in-Charge |
| 14 | M & L for fabrication of M S nipple 0.6 m long100 mm dia threaded both end externally flanged 1 end with heavy duty flanged cold drilled 4 holes and provision of grove for cable entrance systemcomplete as specified and directed by the Engineer-in-Charge |
| 15 | M & L for steel rope 8 mm dia with required size clamp nut and bolt for hanging sumbersible pump and moto rcomplete as specified and directed by the Engineer-in-Charge |
| 16 | S&F Non return valve CI flanged suitable for 100 mm bore including jointing material, nut bolts and washer etc including tking out of old u/s non return valve complete all as directed by Engr In charge. Make- Kirloskar/Leader/Venus/Upadhaya complete as specified and directed by the Engineer-in-Charge |
| 17 | Supply and fixing sluice valve 100mm bore PN-1.6 with gun metal spindle CI hand wheel with flanged ends complete with jointing materials, nut bolts and washersall as directed. Make Upadhaya/Kirloskar complete as specified and directed by the Engineer-in-Charge. |
| 18 | S&F Set of feed pipe made out of 80 mm nominal bore G I pipe medium grade each with all medium grade fittings of suitable length and provided with G I socket and plug for feeding pre gravel complete as specified and directed by the Engineer-in-Charge |
| 19 | Testing of water for chemical, Iron content, Arsenic Content, bacteria and physical test and potable report from Govt Lab to be entire satisfaction of GE complete as specified and directed by the Engineer-in-Charge |
| 20 | Supply, install, testing and commissioning of feeder piller box of size 800X 800 mm totally enclosed, dust and vermin proof, openablefrom both front and rear side, made out of 3.15 mm thick CRCA sheet including 63 Amps4 Nos Aluminium Bus bar complete and built upon 50x50x6mm angle ironframe work, having front and rear hinged doors, lifting lugs (2 Nos), provision for earth strip connection, bottom detachable gland plates, connecting using suitable size of zinc plated and passivated nut, bolts , springs and washers.The cabinet and all members should be chemically treated with anti-corrosive chemicals and apply spray paint with two coats of synethetic enamel paintover a coat of red oxide primer. The panel should be suitable for 415 volts, 50Hz , 3 phase4 wire system and shall be provisioned for (i) MCB TPN 4 pole ofcapacity 40 amps C-curve as incomer (ii) fully automatic Star-Delta motor starter, type MN with SPP feature motor rating 15 HP, 11.25 KW,AC 3 Phase,415 Volt, 50 Hz maximum relay range 9.0-15.0 Amp. Make: L& T/Siemens/BCH (iii) MCB SPN6-32 AMPS with LED Indicating lamps for main supply indicating `R, Y, B set, Three phase Voltmeter and Three phase ammeter d)Low level water guard – 01 set incl necessary grouting/ foundation complete as specified and directed by the Engineer-in-Charge |
| 21 | M&L earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of32X6 mmas earthing leadsby means of bolts, nuts, check nuts and washers besideWelding / brazing at all joints as shown on drawings and including excavation, earth work.GI pipe light grade40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common saltPCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -Iand conected to earth test point including testing complete all as specified and directed. |
| 22 | Supply & Laying burnt bricks, sub class \"B\"bricks designation 75 in trenches laid dry flat and to be placed width wise across the trenche for protection of cable from mechanical injurycomplete as specified and directed by the Engineer-in-Charge |
| 23 | M & L for sand cushioning in trenches under & over the cables with screened river washed sand ,under the floors and hand level surface including watering and consolidation to receive floor tiles. and spreading and leveling properly compaction complete as specified and directed by the Engineer-in-Charge |
| 24 | Supply and lay cable XLPE insulated screened Meter PVC bedded, galvaized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts graded with stranded aluminium conductor of size.50sqmm 3.5 core complete as specified and directed by the Engineer-in-Charge |
| 25 | Material and labour for 80 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, complete all as specified and directed including clamps, nut, bolt and washers complete as specified and directed by the Engineer-in-Charge |
| 26 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out complete as specified and directed by Engr-in-Charge complete as specified and directed by the Engineer-in-Charge |
| 27 | Excavation in trenches not exc 1.5 M wide and not exc 1.5 m depth for soft / loose soil and getting out of pipe linecomplete as specified and directed by the Engineer-in-Charge |
| 28 | Returning filling including sreading levelling watering and well ramming in layers not exc 25 cm after repair/replacement of pipe line in trenches in soft loose soil complete as specified and directed by the Engineer-in-Charge |
| 29 | Removal of surplus soil obtained from excavation to a distance n. exc. 50mtr and depositing where directedat a level n.exc. 1.5mtr above starting point complete as specified and directed by the Engineer-in-Charge. |
| 30 | Removal of surplus soil obtained from excavation to a distance EXC 250 but n. exc. 500 mtr and depositing where directedat a level n.exc. 1.5mtr above starting point all as specified all as directed by Engr-in-Charge. |
| 31 | Demolition and dismantling of concrete in ground floors and paving not exc 15 cm thickness (below or above ground level)complete as specified and directed by the Engineer-in-Charge |
| 32 | Material and labour for cement concrete 1:3:6 type C-2 (40mm grade aggregate) 100 mm thick as in paving/foot path, finished concrete surfaces even and smooth without extra cement and making impression of expended metal whilst the concrete is green, complete all as specified andcomplete as specified and directed by the Engineer-in-Charge |
| 33 | Supply and Fix Water pressure gauge Including taking down old one complete all as specified and directed complete as specified and directed by the Engineer-in-Charge |
| 34 | Supply and fixing rolled mild steel section of ISMB 200 and necessery fabrication to erect desired structure complete all as directed complete as specified and directed by the Engineer-in-Charge |
| 35 | M&L construction of brick masonry valve pit of size 1050 mmX 1000 mm X 1000mm(internal dimensions of chamber)depth to be reckoned from the top ofPCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCCfoundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete as specified and directed by the Engineer-in-Charge |
| 36 | M&L for PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate in PCC block including embedding housing clamp and necessary form work and earth work all as specified and directed by EIC complete as specified and directed by the Engineer-in-Charge |
| 37 | M&L for Cement concrete, (1:4:8) type D-2 (using40mm graded aggregate) as in foundations complete as specified and directed by the Engineer-in-Charge complete as specified and directed by the Engineer-in-Charge |
| 38 | M&L for Reinforced rement concrete type B-1 1:2:4 using 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods,chajjas, water troughs, mangers, shelves and similar articles with plain faces complete as specified and directed by the Engineer-in-Charge |
| 39 | M&L for Mild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete as specified and directed by the Engineer-in-Charge |
| 40 | S & FTMTbars 8 to 10 mm dia as in striuups cut to length, bent to shape required, including cranking ,bending spirally for hooping for coloums, hooking ends and binding mild or securing with clips confirming to ( Fe 410w or Fe-290) complete complete as specified and directed by the Engineer-in-Charge |
| 41 | Brickwork with sub-class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in and cement mortar 1:4 complete as specified and directed by the Engineer-in-Charge |
| 42 | Brickwork with sub-class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in and cement mortar 1:6 complete as specified and directed by the Engineer-in-Charge |
| 43 | M&L for brickwork with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4)complete as specified and directed by the Engineer-in-Charge |
| 44 | M&L for rendering 15 mm thick in CM ( 1:4 ) plaster on wall / concrete surfaces finish even and smooth without using extra cement complete as specified and directed by the Engineer-in-Charge |
| 45 | M&L for rendering 5mm thick on faces of brick work or concrete surfacesCM 1:3, as in ceiling, and finishing the surface even and smooth without using extra cement complete complete as specified and directed by the Engineer-in-Charge |
| 46 | White washing on wall with one coat on undecorated surface and two subsequent coats on it complete as specified and directed by the Engineer-in-Charge |
| 47 | Material & Labour for hard core of broken bricks gauge exc. 63 mm but not exc.100 mm, deposited spread and leveled in layers 100 mm thick and well rammed complete as specified and directed by the Engineer-in-Charge |
| 48 | M&L Hardcore of gaugen exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete as specified and directed by the Engineer-in-Charge |
| 49 | Material & Labour for PCC sanitary sealing of 75 mm thick (1:2:4) type B1 using 20 mm graded aggregate complete all as specified & as directed complete as specified and directed by the Engineer-in-Charge |
| 50 | S&F Aluminium Torsion Spring Perforated Ceiling System : Supply & fixing of torsion spring Tile Ceiling System in true Horizontal Level comprising of Tile of 600mm wide and 600mm/1200mm long manufactured out of 0.7mm thick Aluminium sheet with perforation of 1.8 mm dia. having 20% open area. The metal ceiling panels shall be downward accessible with aminimum of four (4) torsion springs per panel. The Tile will be manufactured through process of seven roller sheets levelling to achieve flat panels. Torsion Spring panel with two side & two end legs die formed and punched to receive torsion springs (min two springs each end or side) for secure engagement into Tee Grid main runners which are factory punched to receive torsion springs. Tiles will be square edged. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. Main Runners of Size 24 x 38 made of 0.35 mm thick (Minimum) Sheet placed 600mm CC with cross T of size 24x32 to be placed 600/1200 mm between the Main Runner & wall angle of size 24x24x 0.40 mm and fixing false ceiling tiles of approved texture in the grid including required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"\"T\"\" runners to be suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener including demolition of any old existing false ceiling.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in charge.Paint Finish: The Tile shall be Polyester powder coated in white colour. Panel will be electrostatically powder coated using electromechanical Reciprocator and automatic conveyer system, cured with gas catalytic technology.Acoustic Felt: Non-woven felt glued over the perforation for sound absorption to achieve NRC of 0.70. |
| 51 | Taking down cement plaster on brick wall and ceiling including raking out joints hacking for key scrubbing down with water etc complete as specified and directed by the Engineer-in-Charge |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises etc complete as specified and directed by the Engineer-in-Charge |
| 53 | M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall / concrete surfaces finish fair and even without using extra cement complete as specified and directed by the Engineer-in-Charge |
| 54 | M&L for granite (any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over15mm thick screed bed in CM 1:4 complete as specified and directed by the Engineer-in-Charge |
| 55 | M&L for coloured glazed ceramic tiles of size 450mm X 300mm X 7mm / 300 mm X 200 mm X 7 mmthick in vertical surface, set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete as specified and directed by the Engineer-in-Charge |
| 56 | M&L for non skid ceramic coloured tiles 7mm to 8 mmthick (square/rectangular)area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete as specified and directed by the Engineer-in-Charge |
| 57 | M&L for non skid ceramic coloured tiles 7mm to 8 mmthick (square/rectangular)area of each tile not exceeding 0.11 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete as specified and directed by the Engineer-in-Charge |
| 58 | M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stoneaggregate as in sub base in floor and rough finished surface to receive floor finishes, complete as specified and directed by the Engineer-in-Charge |
| 59 | M & L preparing new plastered surface of wall and applying two coats of oil emulsion distemper over 1 mm thick JK/Birla wall care cement puttycomplete all as specified and as directed by Engr-in-Charge. |
| 60 | M & for complete removal of existing treatment on wall by scrapping, washing, rubbing down & stopping etc and applying two coats of oil emulsion distemper over 1 mm thick JK/Birla wall care cement puttycomplete all as specified and as directed by Engr-in-Charge. |
| 61 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete as specified and directed by the Engineer-in-Charge |
| 62 | Taking down chowkats or frame with shutter without taking off shutter from the frames exc 1.50 Sqm but not exc 4.0 sqm each as in complete as specified and directed by the Engineer-in-Charge |
| 63 | S&F for powder coated aluminium sections fabricated work as in doors, windows, partition as per manufacturer instruction incl necessary jointing cleats, anodised aluminium snap beading incl taking down damaged portions of damage doors, windows or taking down door/window complete as specified and directed by the Engineer-in-Charge |
| 64 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in eachpane complete all as specified and directed. |
| 65 | M&L framed work such as grills, gratings, gate etc with ends of bars & plates souldered and/or riveted or forged into spikes, framed guard bars barred iron dors ladders framed balusters walkways, railing, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0, complete as specified and directed by the Engineer-in-Charge |
| 66 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 67 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete as specified and directed by the Engineer-in-Charge |
| 68 | S&F 100 mm stainless steel butt hinges medium weight,cold rolledcomplete complete as specified and directed by the Engineer-in-Charge |
| 69 | S&F 150 mm Aluminium handles, D type base plate, anodised complete as specified and directed by the Engineer-in-Charge |
| 70 | S&F 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed |
| 71 | S&F 200 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed |
| 72 | S&F 250 mm aluminium alloy anodisedsliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete as specified and directed by the Engineer-in-Charge |
| 73 | Dismantling of water tank PVC of any pattern and S&F for 500 ltr capacity rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top ) hoisted and Fixed in position all as specificed in SSR part-I.Including supply and fixingof15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and F ( Min Wt 15mm -142 Grams) complete as specified and directed by the Engineer-in-Charge |
| 74 | S&F for 500 ltr capacity rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top ) hoisted and Fixed in position all as specificed in SSR part-I.Including supply and fixingof15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and F ( Min Wt 15mm -142 Grams) complete as specified and directed by the Engineer-in-Charge |
| 75 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete as specified and directed by the Engineer-in-Charge |
| 76 | S&F in repairs PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed in walls complete as specified and directed by the Engineer-in-Charge |
| 77 | S&F in repairs PVC (SWR) floor trap, 75 mm plain withgratingincluding jointingwithsolvent cement complete as specified and directed by the Engineer-in-Charge |
| 78 | S&FPVC (SWR) floor trap, 75 mm plain withgratingincluding jointingwithsolvent cement complete as specified and directed by the Engineer-in-Charge |
| 79 | S&F PVC (SWR) bends any radius of 75mmbore sizes complete complete as specified and directed by the Engineer-in-Charge |
| 80 | S&F in repair PVC (SWR ) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete as specified and directed by the Engineer-in-Charge |
| 81 | S&FPVC (SWR ) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete as specified and directed by the Engineer-in-Charge |
| 82 | S&F PVC (SWR) bends any radius of 110mmbore sizes complete as specified and directed by the Engineer-in-Charge |
| 83 | S&F in repairs 15 mm pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete as specified and directed by the Engineer-in-Charge |
| 84 | S&F in repairs 15 mm bore Bib taps, fancy type cast copper alloy, chromium plated screwed down, screwed for iron pipe or for brass ferulle and fixed complete as specified and directed by the Engineer-in-Charge |
| 85 | S&F PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm complete as specified and directed by the Engineer-in-Charge |
| 86 | S& F Toilet paper holder recessed type. Make -Jaqure-AHS-CHR-1551 or equivalent ot specified make, complete as specified and directed by the Engineer-in-Charge |
| 87 | S&F 15mm bib cock with wall flange . Make jaquar cat part No QQO-7037PM or equivalent ot specified make,complete as specified and directed by the Engineer-in-Charge |
| 88 | S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete as specified and directed by the Engineer-in-Charge |
| 89 | S&F 15 mm bore GItubes, medium grade galvanised, with all fittings medium grade and fixed complete to walls and ceilings or laid in floors or concealed including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete as specified and directed by the Engineer-in-Charge |
| 90 | S&F steel water tubing15 mm bore medium grade galvanised with all fittings medium grade such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling concealed and joints fixed with adhesive complete as specified and directed by the Engineer-in-Charge |
| 91 | S&F 20 mm bore GItubes, medium grade galvanised, with all fittings medium grade and fixed complete to walls and ceilings or laid in floors or concealed including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete as specified and directed by the Engineer-in-Charge |
| 92 | S&F steel water tubing20 mm bore medium grade galvanised with all fittings medium grade such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling concealed and joints fixed with adhesive complete as specified and directed by the Engineer-in-Charge |
| 93 | S&F in repair vitreous china squatting pan \"Orissa\" pattern size 580x440 mm white, with integral foot rest including cement concrete bedding and PVC valveless syphonic action type low level flushing cistern and flush pipe for 10ltr capacity with inlet ball valve float and handleincludingbracket complete and making good to existing floor complete as specified and directed by the Engineer-in-Charge |
| 94 | S&F in repairs vitreous china wash basin, white flat back size 550X400mm including 32mm CPwaste coupling, waste pipe,and brackets fixing in position complete as specified and directed by the Engineer-in-Charge |
| 95 | S&F Table top vitreous chinasquarewash hand basin 420mmx 420mm X 150 mm size, white, flat back or angle including padestal. Make- Cera/Hindware/Parreware or equivalent. complete as specified and directed by the Engineer-in-Charge |
| 96 | & FSingle lever basin mixerwithout popup waste system with 450 mm long braided houses.( Jaquar VGP-CHR-81011B ) or equivalent to Hindware/Marc complete as specified and directed by the Engineer-in-Charge |
| 97 | S&F in repair vitreous china wash down water closet pan (pedestal Pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including plastic seat cover complete as specified and directed by the Engineer-in-Charge |
| 98 | S&F in repair Healthfaucet(ABSBody)stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABSwallhookincludingmaking connections and fixed in position complete in all respect as specified complete all as specified and as directed. |
| 99 | S&FHealthfaucet(ABSBody)stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABSwallhookincludingmaking connections and fixed in position complete in all respect as specified complete all as specified and as directed. |
| 100 | S&F in repair Viterous China Urinal, Half stall type, white incl waste pipe,PTMT grating doom of 100mm dia size, PVC Connection and urinal spreader complete includingproviding and fixing plugs, bedding urinal against wall in cement mortor 1:2. complete as specified and directed by the Engineer-in-Charge |
| 101 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete as specified and directed by the Engineer-in-Charge |
| 102 | S&F PVC connections 600mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair complete as specified and directed by the Engineer-in-Charge |
| 103 | S&F PTMT gratting doom of 100mm dia size complete as specified and directed by the Engineer-in-Charge |
| 104 | S&F CP Grating doom 125 mm dia with waste hole complete as specified and directed by the Engineer-in-Charge |
| 105 | S&F in reapir CP angle stop cock of 15mm bore screwed down for high pressure with crutch fancy type ,screwed both end for iron pipes complete as specified and directed by the Engineer-in-Charge |
| 106 | S&F15 mm angle stop valves (fancy type), cast copper alloy , chromium palted,screwed down high pressure witg crutch and butter fly handles , screwedwithiron pipes or for union, complete all as specified and as directed. |
| 107 | S&F 600mmx450mm looking mirror of selected quality mounted on PVC frame with and Fixed in wall with CP brass screw and cup washer complete as specified and directed by the Engineer-in-Charge |
| 108 | S & F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete as specified and directed by the Engineer-in-Charge |
| 109 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR-2004 Part - II, complete as specified and directed by the Engineer-in-Charge. |
| 110 | M&L for Machine pressed precast coloured concrete interlocking paver block vibro compacted rubber moulded with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed by Engr-in-Charge. |
| 111 | M&L for providing cement concretetype C1 1:3:6 (20mm graded aggregate) as rounded or chamfered on edges complete all as specified and directed. |
| 112 | M&L for Nominal Mix of RCC (1:2:4) (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts including formwork, compaction, finishing fair faces, complete all as specified and directed by the Engineer-in-Charge. |
| 113 | M&L for Nominal Mix of RCC (1:2:4) (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, and lintels exceeding 1.5m span, including formwork, compaction, and finishing fair faces, complete all as specified and directed by the Engineer-in-Charge. |
| 114 | M&L for Nominal Mix of RCC (1:2:4) (using 20mm graded stone aggregate) for chajja including formwork, finishing the exposed surfaces fair and smooth, edges throated, weathered and rounded as required, complete all as specified and as directed by the Engineer-in-Charge. |
| 115 | M&L for Nominal Mix of RCC (1:2:4) (using 20mm graded stone aggregate) in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves, and the like, including formwork, compaction, and finishing fair faces, complete all as specified and directed by the Engineer-in-Charge. |
| 116 | M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in surface channels and drains complete as specified and directed by the Engineer-in-Charge |
| 117 | M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping complete as specified and directed by the Engineer-in-Charge |
| 118 | M&L 75mm thick cement concrete (1:3:6) type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection and path laid in panels not more than 3.0 mtr in lenght laid to slope 1:30 including forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 Parts of sand) surface,complete all as specified and directed.(Note:- The quoted tates are deemed to be inclusive of material against work and joints fillings.) |
| 119 | Supply only liquid water proofing compound complete as specified and directed by the Engineer-in-Charge |
| 120 | M&L for preparation of newly plastered of surface and three coat of white wash on wallsurface incl complete as specified and directed by the Engineer-in-Charge |
| 121 | M&L for preparation of newly plastered of surface and three coat of white wash on ceilingsurface incl complete as specified and directed by the Engineer-in-Charge |
| 122 | M&L for preparation ofnew plaster surfaces of wall and applying two coats of cement base paintover a coat of primer/puttycomplete as specified and directed by the Engineer-in-Charge |
| 123 | S & F Rimless Type Floor Mounted Coupled WC with Dual Flush Cistern, UF soft close seat cover with stainless steel hinges, conversion bend and all necessary fixing accessories, size 420×710×810 mm, S-trap 250 mm (with conversion bend), complete all as specified and directed by the Engineer-in-Charge. Make: confirming to cat part Cat. Part No.: QPS-WHT-7753S250UFPMZ of Jaquar complete as specified and directed by the Engineer-in-Charge |
| 124 | S & F Towel Rail 600 mm long, complete with all fixing accessories, fixed in position with screws, rawl plugs, and chromium plated brackets, complete all as specified and directed by the Engineer-in-Charge. |
| 125 | S&F of Soap Dish (Wall-Mounted) size 110 mm × Height 60 mm,fixed in position with chromium plated brackets, screws and necessary accessories, complete all as specified and directed by the Engineer-in-Charge. |
| 126 | S & F Corner Glass Shelf (with bracket), size 225 mm × 225 mm (triangle corner type), fixed in position with chromium plated brackets, screws, rawl plugs and necessary accessories, complete all as specified and directed by the Engineer-in-Charge. |
| 127 | S & F Wall-Mounted Urinal with all necessary fixing accessories, size 340 × 320 × 650 mm, including chromium plated brackets, screws, rawl plugs, and complete installation, as specified and directed by the Engineer-in-Charge |
| 128 | S & F Two‑Way CP Angle Valve, 15 mm, of approved make, complete with necessary washers, screws, and fittings, fixed in position, including all accessories and connection to plumbing lines, complete all as specified and directed by the Engineer‑in‑Charge. |
| 129 | M&L for Cutting into existing manholes for connecting new drains and making good to pipe and rendering cutting out existing bending for and forming branch channel incement concrete 1:2:4 type B1 smooth finished and reforming benching as required for pipe 150mm bore complete as specified and directed by the Engineer-in-Charge |
| 130 | M&L for salt glazed stone ware drain pipe laid in trenches and jointed all as specified (internal dia of pipe 150 mm bore pipe) complete as specified and directed by the Engineer-in-Charge |
| 131 | M&L for PCC (1:4:8)type D2 ( using40mm graded stone aggregate ) as inthe drain pipe incl packing under & haunchingagainst the side of pipe after they are laid and tested for 150mm dia complete as specified and directed by the Engineer-in-Charge |
| 132 | M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete as specified and directed by the Engineer-in-Charge |
| 133 | M & L powder coated anodised aluminium(sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 2mm thick, side & top track frame size92 X 29.5 X 2mm thickand shutter aluminium anodised 39 X 20 X 2 mm thick incl necessary aluminium fittings likejointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass inpanels incl all fittings & fixture complete as specified and directed by the Engineer-in-Charge |
| 134 | M & Lpowder coated anodised aluminium doors (sliding/hanging type) with frame size 101.6 X 44.75 X 2.4mm thick and shutter aluminium anodised and Lock Rail 44.45X 47.62 X 2.02mm, style 44.45X 47.62 X 1.95 mm, Top Rail 101.60X 44.45 X 1.93mm, Intermediate rail 101.50X 44.45 X 2.01 mm and bottom rail 101.60X 44.50 X 2.5 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminum handles 150 mm 02 nos, Aluminium tower bolts 200mm 01 Nos, mortice lock 4 lever MS, , jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with panelling in two parts with 5 mm thick ACP Sheet incl all fittings & fixture complete as specified and directed by the Engineer-in-Charge |
| 135 | Material and labourfor point wiring of One light/ fan/ bell point controlled by one switchwith two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete as specified and directed by the Engineer-in-Charge |
| 136 | Ditto as above but for one 3 pin switch socket outlet point 5 Amps on independent board….ditto as above ….complete as specified and directed by the Engineer-in-Charge |
| 137 | All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size. complete as specified and directed by the Engineer-in-Charge |
| 138 | M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 139 | M&L for Modular socket outlet 2/3 pin combined 2 module, 6 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge. |
| 140 | M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 141 | M&L for Modular socket outlet 2/3 pin combined 2 module, 6 Amps/16 Amps Combimed, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge. |
| 142 | S & F Ceiling Rose, surface type, backlite, size 65 × 50 mm, with 3 terminals, including necessary screws and fixing accessories, complete in position as specified and directed by the Engineer-in-Charge. |
| 143 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete as specified and directed by the Engineer-in-Charge |
| 144 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as specified and directed by the Engineer-in-Charge |
| 145 | Supply and fixing factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asianOr eqvt make of Havells/Legrand complete as specified and directed by the Engineer-in-Charge |
| 146 | Supply and fixing MCB single pole 240 volt \"C\" curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one.complete as specified and directed by the Engineer-in-Charge |
| 147 | Supply and fixing MCB single pole & neutral 240 volt \"C\" curve 10 KA 40 to 63Amps complete all as specified and directed . |
| 148 | M&L for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 2.50 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit) complete as specified and directed by the Engineer-in-Charge |
| 149 | Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 250 mm sweep with louverincluding breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioningincluding writing MES No complete all as specified and directed. |
| 150 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth strip 25X 4 mm as earthing leadby means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but with earth lead protection pipe and test on completion complete all as specified and as directed.(Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.) |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
