|
| 1 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.(a) 1216 (16 mm OD) pipe |
| 2 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.(a) 1620 (20 mm OD) pipe |
| 3 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge. (a) 2025 (25 mm OD) pipe |
| 4 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS : 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.(a) 2532 (32 mm OD) pipe |
| 5 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) 110 mm diameter |
| 6 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) 75 mm diameter |
| 7 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (a) Coupler 1242.1.2 110 mm diameter |
| 8 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(a)Coupler12.421.1 75 mm diameter |
| 9 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion. (a) Single tee with door 75x75x75 mm |
| 10 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (a) Single Y Junction 75x75x75mm |
| 11 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (a) Duoble Y Junction 110x110x110mm |
| 12 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° (a) 110 mm bend |
| 13 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(a) 12.42.51 75 mm bend |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall (a) 50 mm dia nominal bore |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall (a) 65 mm dia nominal bore |
| 16 | Making connection of G.I. distribution branch with G.I. main of followingsizes by providing and fixing tee, including cutting and threading the pipeetc. complete : (a) 50 to 80 mm nominal bore |
| 17 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting andthreading the pipe and making long screws, including excavation, refillingthe earth or cutting of wall and making good the same complete whereverrequired : (a) 50 mm nominal bore |
| 18 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting andthreading the pipe and making long screws, including excavation, refillingthe earth or cutting of wall and making good the same complete whereverrequired : (a) 65 mm nominal bore |
| 19 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : (a) 50 mm nominal bore |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) (a)65 mm nominal bore |
| 21 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete : (a) 20 mm nominal bore |
| 22 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete : (a) 25 mm nominal bore |
| 23 | Hiring and operating of Wire suspended platform i.e. Cradle including erection charges, shifting from one building to other building (vehicle to be self arranged by agency), shifting from same building on top to top & cost of operator completeand its deployment as per direction of Engineer-in-charge for maintenance work of water supply lines & waste water pipe lines. |
| 24 | Providing and fixing brass PRV (Pressure Relief Valve) i/c removing of existing damaged PRV and making the joints good etc and as per direction of engineer-in-charge.Internal work - Exposed on wall (a) 20 mm dia nominal bore |
| 25 | Providing and fixing brass PRV (Pressure Relief Valve) i/c removing of existing damaged PRV and making the joints good etc and as per direction of engineer-in-charge.Internal work - Exposed on wall (a) 25 mm dia nominal bore |
| 26 | Add Correction factor @0.973 = ₹ 28,55,305.00 |
| 27 | Condition:(i) The agency has to deploy its self owned Wire suspended platform i.e. Cradle with manufacturing testing certificate (MTC) and trained manpower to operate the cradle with all necessary safety equipments. |
