|
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1)The elevational area of the scaffolding shall be measured for payment purpose. (2)The payment will be made once only for execution of all items for such works. |
| 2 | Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | 12 mm cement plaster of mix : |
| 5 | 1:4 (1 cement: 4 fine sand) |
| 6 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 7 | 1:4 (1 cement: 4 fine sand) |
| 8 | Demolishing cement concretemanually/ bymechanicalmeans includingdisposalofmaterialwithin 50metresleadasper direction of Engineer - in - charge. |
| 9 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 11 | 40 mm thick with 20 mm nominal size stone aggregate |
| 12 | Providing and fixing Half round UPVC rain gutter pipes (2.5kg/cm2) of make Prince rainfit or equivalent with necessary screws etc all complete as directed by EIC (additional UPVC fittings to be paid seperately) |
| 13 | 180 mm dia |
| 14 | 250 mm dia |
| 15 | Providing and fixing UPVC fittings for Half round rain gutter of make Prince rainfit or equivalent with necessary screws etc all complete as directed by EIC |
| 16 | Joint Bracket(8.1.1). 180 mm dia |
| 17 | Joint Bracket(8.1.2)250 mm dia |
| 18 | Running Out let (8.2.1) 180 mm dia |
| 19 | Running Out let (8.2.2) 250 mm dia |
| 20 | 90 ̊ Elbow(without outlet)(8.3.1 ) 180mm dia |
| 21 | 90 ̊ Elbow(without outlet)(8.3.2) 250 mm dia |
| 22 | 90 ̊ Elbow (with outlet)(8.4.1) 180 mm dia |
| 23 | 90 ̊ Elbow (with outlet)(8.4.2) 250 mm dia |
| 24 | Short stop end (8.5.1) 180 mm dia |
| 25 | Providing and fixing UPVC fittings for Half round rain gutter of make Prince rainfit or equivalent with necessary screws etc all complete as directed by EIC |
| 26 | Short stop end (8.5.2) 250 mm dia |
| 27 | short stop outlet(8.6.1) 180 mm dia |
| 28 | short stop outlet(8.6.2)250 mm dia |
| 29 | Single socket elbow110 m dia |
| 30 | Galvanized Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 31 | Providing and fixing G.Ibolts with nuts and washer plates complete. |
| 32 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : |
| 33 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 34 | Providing and fixing PVC Pipe 6 kg/cm2 with necessary clamps screws etc all complete. |
| 35 | 110 mm diameter |
| 36 | 160 mm diameter |
| 37 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC pipes including jointing with solvent : PVC door bend |
| 38 | 110 mm dia |
| 39 | 160 mm dia |
| 40 | Providing and fixing UPVC (SWR) moulded fittings/accessories for UPVC pipes including jointing with solvent : UPVCplain bend |
| 41 | 110 mm dia |
| 42 | 160 mm dia |
| 43 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC pipes including jointing with solvent : PVC tee withdoor |
| 44 | 110 mm dia |
| 45 | 160 mm dia |
| 46 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC pipes including jointing with solvent : PVC plain tee |
| 47 | 110 mm dia |
| 48 | 160 mm dia |
| 49 | Providing and fixing customized curve FRP gutter of size 200x250 mm and 6 mm thick, as per the site requirement and with necessary outlet of dia 110 mm fixed with necessary screws etc all complete as directed by EIC. |
| 50 | Providing and fixing 24\" x 24\" FRP manhole cover load bearing capacity 5 MTof approved quality as directed by Engineer-In-Charge. |
