|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n. Exc 15 cm thickness (below or above ground level)complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (inclbacking), removing tilesand rubbish off the premises (out of Defence land)complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for 75 mm thickcement concrete type D-21:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for 18 -20 mm thick polished kota stone, machine cut kota stone slab flooringover 20mm thick cement screed bed in CM (1:6), andjointed in neat cement slurry mixed with pigment to match the shade of slabcomplete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 20 mm thick screed bed in cement mortar (1:6)complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for glazed ceramic coloured tiles (450x300x7mm) thick on vertical surfaces such as skirting wall, and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in cement mortar (1:4) rough to receive tilescomplete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for vitrified ceramic light coloured tiles 10 mm thick (square/rectangular) area of each tile n.exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 20 mm thick screed bed in cement mortar (1:6)complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L in repair of Antistatic false flooring (raised access floor) Panels comprising of nominal 600mm (30 to 35mm thick) modular panels (USF 1000 HPL finish Panel 600 x 600 x 35mm) with heavy duty pedestals in Antistatic false flooring (raised access floor) system. (The total system weight shall not exceed 40 Kg/Sqm. The system shall be able to withstand a UDL of 2000 Kg/m2 and a point load of 450 Kg/m2.)complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingcomplete all as specified and directed by Engineer-in-Charge. |
| 10 | Taking down chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L fortwo coat of synthetic enamel paint( finishng coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfacescomplete all as specified and directed by Engineer-in-Charge. |
| 13 | S&F in repair 1mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer,erected in position as indicated, complete: push pull or manual typecomplete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F of 100 m size SS butt hinges, medium weight (including fixing with nails or welded as required) complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F of250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F of 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F of 200 mm Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge. |
| 18 | M&L for two coat of synthetic enamel paint( finishng coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfacescomplete all as specified and directed by Engineer-in-Charge. |
| 19 | Dismantling of cast iron/PVC pipes 75/100mm dia complete all as specified and directed by Engineer-in-Charge |
| 20 | S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints laid in trenches or in floor including necessary excavation complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F of PVC (SWR) pipe 110 mm dia bends complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F of PVC (SWR) pipe 75 mm dia single socketed with rubber ring joints laid in trenches or in floor complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F of PVC (SWR) pipe 75mm dia single socketed with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F of PVC (SWR) pipe 75 mm dia bends complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F in repair 15mm GI tubing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F in repair 20mm GI tubing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in repair 32mm dia Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified anddirected by Engineer-in-Charge. |
| 29 | S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high densitycomplete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F in repair Vitreous china wash basin,whiteflat back, size 580x450mm excluding taps, but including 32mm dia waste pipe/waste coupling of PTMTincl bracket setc complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Dismantling water tank exc 500 & n exc 1000 ltr and removing from site complete all as specified anddirected by Engineer-in-Charge. |
| 32 | S&F rotational moulded polythene water storage tanktriple layers (Cylindrical vertical withclosed top) hoisted and fixed in position of 1000 ltrs capacity any description,complete all as specified in SSR Part I and directed by Engr-in-Charge. |
| 33 | Dismantling water tank exc 250 & n exc 500 ltr and removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 34 | S&F of rotational moulded polythene water storage tank triple layers (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity any description,complete all as specified in SSR Part I and directed by Engr-in-Charge. |
| 35 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed complete all as specified anddirected by Engineer-in-Charge. |
| 38 | S&F in repair 15 mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule,complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F as in repair CP toilet paper holder with flat recessed type stainless steel fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repair pillar tap, 15 mm dia copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified anddirected by Engineer-in-Charge.. |
| 41 | S&F in repair 15 mm stop valve fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F in repair soap dish, any type, fixed to plug with chromium plated brass screws in the wall with glass shelf assembly complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in positioncomplete all as specified and as directed by Engineer-in-Charge. |
| 44 | S&F in repair for PVC connection 600mm long superior quality with PTMT nut on both side complete all as specified and as directed by Engineer-in-Charge. |
| 45 | S&F in repair waste coupling PTMT suitable for 32 /40 mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device (suitable for EWC) complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F in repair 15mm dia wall mixer for hot and cold water chromium plated brass fancy type with self closing taps, cast copper alloy with all connection,screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long,complete all as specified and directed by Engineer-in-Charge. |
| 49 | M&L for easying door shutter of any description exc 1 sqm but n exc 2 sqm of any description incl taking down shutter and refixing in the same openingafter rectifying all defects in the shutter, oiling / servicing of floor spring, hydraulic door closer, tightening all loose screws, cleats, etc replacing all rubber gaskets/aluminium beadingcomplete all as specified and directed by Engineer-in-Charge. Note:The minor parts such as screws, cleats, oil, rubber gasket, aluminium beading etc shall deemed to be including in quoted rate. |
| 50 | S&F in repair 15mm CP WHB mixer of long neck for mixing hot & cold water screwed down for iron pipe and and fixed complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F as in repair for 1 piece of mirror cabinet 50x31x11cm washbasin rack storage cabinet plastic, glass wall shelf (number of shelves-6) complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S&F sensotronic Sensor Flushing Valve for Urinal with Complete Kit (Suitable For Urinal URS-WHT-13255 ), complete as per manufacturer\"s specified and directed by Engr-in-Charge |
| 53 | S&F of Urinal with sensor ascessories kit complete ofsize- 485X 310X 710mm, complete as per manufacturer\"s specified and directed by Engr-in-Charge. |
| 54 | S&F in repair automatic swing door operator door width = 1100mm max door weight =1x 160Kgs qty 02 Nos, ED slide channel set qty 02 Nos, ED Basic cover qty 02 Nos, ED slide channel axle extension -60mm-1pce, push button-white, system 55-4 piece, centre lock (automatic slide door system) for toughened glass door card/key operated incl all fittings as per site requirement complete as per manufacturer\"s specification and directed by Engr-in-Charge. |
| 55 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including seat cover and CP hinging device (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L for 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in repair of 12mm thick toughened glass urinal partition of size 450mm x 900mm incl all necessary fitting & fixures for fixing complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in repair chromium plated Jet for EWC including PVC connection and accessories complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl, size 410mmx330mmx160mm complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F in repair towel rail600mm long of chromium plated brass screw and wooden / plastic cleats complete all as specified and directed by Engineer-in-Charge. . |
| 62 | S&F 600x450 mmbevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed by Engineer-in-Charge. |
| 63 | Dismantling Plain or corrugated steel sheeting/AC/ Fibre reinforced, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge. |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spd and directed by Engineer-in-Charge. |
| 65 | S&F framed work such as grills, grating, steel ladder, iron gate and doors framed and hung as gates including pintle hinges, stops, hand made sliding bolt, handles etc complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F of pe-painted gaivatume aluminium sheet zinc coatin GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F of pre-painted gaivatume aluminium sheet zinc coatin GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
