|
| 1 | M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)but making good by applying tack coat @ 5 kg per 10 sq m with paving bitumem, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings)depth of potholes exc 30 mmcomplete all as specified and directed. |
| 2 | M&L Preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.on black top surfaces complete all as specified and directed. |
| 3 | M&L Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq meters on black top surfaces complete all as specified and directed. |
| 4 | M&L Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix, rolled (using 8 to 10 Tone roller) and compacted to required camber and gradient using paving bitumen any penetration.complete all as specified and directed. |
| 5 | M & L premix bituminous, macadam not exceeding 75mm thickness consoliadated/compacted using hot mix plant and mechanical paver with 4% bitumen gradeof (VG 30)grade binder content by weight of total mix laid/roled and compacted 8 to 10 tonne power roller to required camber and gradient using 20mm graded stone aggregate complete all as specified and directed. |
| 6 | M&L for preparation bituminious surface of road and marking 2.5mm thick centre lines,stop lines,dashes,arrows etcand the line n exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacurers insruction complete allas specified and directed. |
| 7 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 8 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 9 | M&L Moorum/Red bajri, 100 mm thick spread, rolled and consolidated to gradient and camber required as specified and directed |
| 10 | Supply and Fixing PVC made of Material: ABS speed bumps, Colors: Yellow and Black,tapering to top. Fixing arrangement: Anchor bolts + Epoxy mortar grout.all as directed by Engineer-in-Charge. |
| 11 | S&F Convex mirror of size 600 mm dia with one post including fixing arrangment, site will be given by Engr-in-Charge and all as specified and directed by EIC. |
| 12 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified. |
| 13 | M&L75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub basecomplete allas specified and directed |
| 14 | M&L for 50 mm thick Sand cushion under floors complete all as specified and as directed. |
| 15 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 80mm thickness M-40 Grade complete all as specified and as directed. |
| 16 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately) |
| 17 | M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)but making good by applying tack coat @ 5 kg per 10 sq m with paving bitumem, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings)depth of potholes exc 30 mmcomplete all as specified and directed. |
| 18 | M&L Preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.on black top surfaces complete all as specified and directed. |
| 19 | M&L Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq meters on black top surfaces complete all as specified and directed. |
| 20 | M&L Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix, rolled (using 8 to 10 Tone roller) and compacted to required camber and gradient using paving bitumen any penetration.complete all as specified and directed. |
| 21 | M & L premix bituminous, macadam not exceeding 75mm thickness consoliadated/compacted using hot mix plant and mechanical paver with 4% bitumen gradeof (VG 30)grade binder content by weight of total mix laid/roled and compacted 8 to 10 tonne power roller to required camber and gradient using 20mm graded stone aggregate complete all as specified and directed. |
| 22 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 23 | Supply and fixing in repairscat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 24 | Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 25 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified. |
| 26 | M&L100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub basecomplete allas specified and directed |
| 27 | M&L for 50 mm thick Sand cushion under floors complete all as specified and as directed. |
| 28 | M&L for Machine p ressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006 of 80mm thickness M -40 Grade complete all as specified and as directed. |
| 29 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 30 | M&L Plain cement concrete (1:2:4) type B-1using 20 mm garded stone aggregates as in coping, bed plate, and the like including weathering, slightly rounded or chamferred angles and throating as directed including provision of necessary form work and finishing exposed surface even and smooth without using extra cement,complete all as specified. |
| 31 | Supply and Fixing in repairsdual direction speed-breaker having high intensity cube corner reflector ultasonic weldded to high impact resistant ABS plastic body of colour yellow and black of size 250x345x50mm (height) provided with steel nails .shape of side body to have interlocking pattern tokeep all speed breaker in row Cat Part No. GPL-07-06 Make GREENS/GREENLITE OR equivalent. Fixing arrangement: Anchor bolts + Epoxy mortar grout.all as directed by Engineer-in-Charge. |
| 32 | Supply and fix repairs polycarbonate reflective convex mirror of size 900 mm dia made of ABS/fiber/ppolastic body with upper collar complete with mounting hardware i.e. necessary clamps & nut bolts etc mounted on and including 65mm dia MS pipe having 2.0M length duly painted two coats with and including white or blue or any other colorsynthetic enamel paint as approved by Engr-in-charge over a coat of red oxide primer and fixed on the ground after necessary excavation and earth work in any type of soil, embeading the delianator on the ground with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200 mmx200mmx200mm for proper grouting) complete all as specified as directed.Make of Convex Mirror of road star , Green Lite or Dark eye or Sun Lite as approved Engr-in-Charge and all as specified and directed by EIC. |
| 33 | Supply and fix in repairs solar flasher/ delineators pole mounting with protective cover & pole of 50 mm dia, 900 mm length, fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4)type B1 using 20mm graded stone aggregate (minimum PCC block size 150mmx 150mmx 300mm for proper grouting) complete all as specified and directed.Make of Delineators:- GPF-800 P of Road Star or equivalent Model of make- Green Lite or Dark Eye or Sun Lite as approved by GE. |
| 34 | M&L Moorum/Red bajri, for road side berms laid in layers n exc 15 cm thiuck spread,levelled , rolled and consolidated to gradient and camberrequired including wateringas specified and directed |
| 35 | Schedule of credit amount of Rs 13200.00 to be deducted during AOC |
