Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises completeall as specified and directed. |
| 2 | Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work and removing materials from site of work complete all as specified and directed. |
| 3 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc.including removing of unserviciable material from site complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed. |
| 5 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for and removing materials from site of work complete all as specified and directed. |
| 6 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness, including cover fillet complete all as specified and directed. |
| 7 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. and removing debrish from site complete all as specified and directed. |
| 8 | Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 9 | Taking down chowkats or frames with shutters exc. 1.50 sqm but n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 10 | Material and labour for repairs to uneven surface of concrete and reinforcement from drop of fins,facias, chajjas using necessary scaffolding and making good disturbed portion with rendering cement plaster, 10mm thick in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | Supply and fix in repair suspended false ceiling with \"E\" grid suspended ceiling grid system of grid size 600X600mm with GI framed work of main runner 38X24mm sheet thickness 0.4mm, cross tee 28X24mm sheet thickness 0.3mm and wall angle 24X24X0.3mm including 4mm thick non-asbestos fibre cement bldg designer board confirming to IS-14862, type B, cat 3 of oceanic texture and of any colour of size 595X595mm to be placed in the grid suspended by 4mm dia GI wire at ditance n.exc. 1.20m centre to centre with butterfky clips complete all as specified and directed. |
| 12 | Supply and fix solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/Aluminium frame complete all as specified and directed. |
| 13 | Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 14 | Material and labour for vitrified ceramic tiles (light shade) (premium quality) 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 20mm thick screed bed in cement mortar (1:6)complete all as specified and directed. |
| 15 | All as per item No 14.00 above but in skirting and dado laid over and including 10mm thick rendering in cement mortar (1:4) and -ditto-. |
| 16 | Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 20mm thick screed bed in cement mortar (1:6)complete all as specified and directed. |
| 17 | Material and labour for glazed ceramic tiles of size 450x300x7mm/ 300x200x7 (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) completeall as specified and directed. |
| 18 | Materials and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer including applying1mm thick wall care putty including preperation of surface complete all as specified and directed. |
| 19 | Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 20 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 21 | Material and labour for 100mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor and pavings including finishing theconcrete surface fair and even complete all as specified and directed. |
| 22 | Material and labour for 50mm thick PCC (1:2:4) type B-1 (using 20mmgraded stone aggregate) as in floor and finished the surface fair and even complete all as specified and directed. |
| 23 | Finishing of concrete surface by brooming whilst the concrete is green complete all as specified and directed. |
| 24 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) andfinish the surfaceseven and smooth without using extra cement on wall complete all as specified and directed. |
| 25 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) andfinish the surfaceseven and smooth without using extra cement on wall complete all as specified and directed. |
| 26 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 27 | Material and labour for preparation of new plastered surfaces of wall and applying three coat of white wash completeall as specified and directed. |
| 28 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 0.715 litre/ 10 sqm complete all as specified anddirected. |
| 29 | Material and labour for complete removal of existing treatement on old decorated surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 30 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 31 | Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 32 | Supply and fix 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 33 | Material and labour for second class hard woodin timber scantlingwrought, framed and fixed complete all as specified and directed. |
| 34 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 35 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 36 | Supply and fix solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet plain colour reinforced with MS square tube as per specification and drawinggiven in SSR Part-II 2020 complete all as specified and directed. |
| 37 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification and drawinggiven in SSR Part-II 2020 complete all as specified and directed. |
| 38 | Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 39 | Supply and fix SS Butt hinges medium weight 75mm sizecomplete all as specified and directed. |
| 40 | Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 41 | Supply and fix in repair 100mm long aluminium handles, cast type, anodized complete all as specified and directed. |
| 42 | Supply and fix 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate andtwo on staple plate complete all as specified and directed. |
| 43 | Supply and fix 100mm long aluminium handles, cast type, anodized complete all as specified and directed. |
| 44 | Supply and fix in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring fixed to door complete all as specified and directed. |
| 45 | Supply and fix in repair 25 mm dia aluminium anodised decorative/fancy type drapery rodwith bracket complete all as specified and directed. |
| 46 | Supply and fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 47 | Supply and fix Steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed. |
| 48 | Supply and fix steel rolling shutters, thickness of laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 49 | Supply and fix safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 50 | Supply and fix ball bearing for rolling shutters complete all as specified and directed. |
| 51 | Supply and fix in repair 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 52 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girthand applying two coats ofsynthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed. |
| 53 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 54 | Material and labour for preparation of new wooden surfaces of any description exc 10 cm width or girthand applying two coats ofsynthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 55 | Materials and labour for half brick thick brick work with fly ash bricks, old size, straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified and directed. |
| 56 | Material and labour for 20mm thick black marble tiles machine cut in cooking plateform and jointed with grey cement slurry including cutting and polishing of type laid over and including 20mm thick screed bed in CM (1:6) completeall as specified and directed. |
| 57 | Material and labour for machine cut cudappah stone slab 20-25mm thick over 15mm thick cement screed base in CM (1:6) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed. |
| 58 | Material and labour for 20mm thick (jade black) granite work (table rubbed and polished) in steps, jambs, window cills, cooking platforms and like in cement mortar (1:4) including pointing, grooving to wall etc with white cement using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 59 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations completeall as specified and directed. |
| 60 | Supply and fix stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 61 | Material and labour for making sign board made of 2mm thick stainless steel sheet and approved colour sticker on front side of sheet and lettering made with retro reflective sheet (encapsulated lens type ) in approved colour over the sticker which stick on screwed to the frame complete all as specified and directed.Note:- Frame work of sign board shall be measured and paid seperately under respective items |
| 62 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cess pits man holes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 63 | Removing excavatedmaterial not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point as in soft/loose soilcomplete all as specified and directed. |
| 64 | Materials and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 65 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 66 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and directed. |
| 67 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 68 | Material and labour for form work to soffits of suspended slab such as roof slab, floor slab landings and similar work; not exceeding 200mm thick (Horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed. |
| 69 | Material and labour for RCC (1:2:4) (nominal mix) type B-1 (using 20mmgraded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 70 | Materials and labour for 40mm thick damp proof course in cement concrete (1:2:4), type B-0 (12.5mm graded stone aggregate) with WPC as per manufactures instructions to horizontal or vertical surfaces including necessary formwork and polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed. |
| 71 | Material and labour for PCC (1:2:4), type B0, (using 12.50 mm graded stone aggregate), as in coping, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessaryformwork complete all as specified and directed |
| 72 | Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 73 | Supply only liquid water proofing compound (WPC) completeall as specified and directed. |
| 74 | Material and labour for brick work with fly ash brick, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6)complete all as specified and directed. |
| 75 | Material and labourfor 5mm thick rendering in cement mortar (1:3) with using water proofing coumpound (WPC) @ 200 ml per bag of cement (50 Kg) or as per manufacturers instruction on roof top while concrete is green to become integrated part of concrete padding layer and finish the surfaceseven and smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 76 | Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mmgraded stone aggregate) as in sub base or base course of floor etc complete all as specified and directed. |
| 77 | Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mmgraded stone aggregate) as in sub base or base course of floor etc complete all as specified and directed. |
| 78 | Material and labour for 5mm thick rendering onconcrete surfaces in cement mortar (1:3) andfinish the surfaceseven and smooth without using extra cement as in ceiling complete all as specified anddirected. |
| 79 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash completeall as specified and directed. |
| 80 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank and removing from site complete all as specified and directed. |
| 81 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 82 | Supply and fix 20mm dia ball valvehigh pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed. |
| 83 | Supply and fix looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and directed. |
| 84 | Supply and fix in repair gun-metal globe or gate valves 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 85 | Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 86 | Supply and fix 20 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floorsincluding taking down existing unserviciable GI pipe complete all as specified and directed. |
| 87 | Supply and fix 15 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floorsincluding taking down existing unserviciable GI pipe complete all as specified and directed. |
| 88 | Supply and fix 15 mm bore CP fancy type stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both,ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 89 | Supply and fix vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste pipe, chain & plug and porcelain stopper but with brackets and 32 mm bore brass waste fittings chromium plated including cutting for and pinning in ends of brackets including 32mm dia PVC waste pipe of 800mm long and 15mm dia fancy type CP finish Swan neck type Pillar tap cast copper alloy with capstan heads screwed down high presuure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron / CPVC pipe / fittings complete all as specified and directed. |
| 90 | Supply and fix vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe including cast iron P or S trap fixed on floorcomplete all as specified and directed. |
| 91 | Supply and fix 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. |
| 92 | Supply and fix vitreous china urinals, bowl type, white flat back of size 465x355x265 (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), including 32mm dia CP waste coupling complete all as specified and directed. |
| 93 | Supply and fix vitreous china urinal partition white of size 310x700 mm, partitions terminating about 40cm above floor line fixed with rawl plug and steel screws complete all as specified and directed. |
| 94 | Supply and fix unplasticised 50mm dia PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 95 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. |
| 96 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 97 | Supply and fix 75 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. |
| 98 | Supply and fix 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 99 | Supply and fix 15mm bore brass angle cock fancy type, chromium plated foriron pipe complete all as specified and directed. |
| 100 | Supply and fixPVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 101 | Supply and fix 125mm dia stainless steel grating doomwith hole complete all as specified and directed. |
| 102 | Supply and fix soap dish, brass, chromium plated complete all as specified and directed. |
| 103 | Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 104 | Supply and fix urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms) complete all as specified and directed. |
| 105 | Supply and fix cast Iron floor trap with grating of 75 mm dia outletincluding jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 106 | Supply and fix looking mirror ofsize 1500mm x 500mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and directed. |
| 107 | Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including stack clamp of suitable size complete all as specified and directed. |
| 108 | Supply and fix 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. |
| 109 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in soft/loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm including removing surplus soil from site complete all as specified and directed. |
| 110 | Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 111 | Material and labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 112 | Material and labour for structural steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without anyattachment conforming to Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed. |
| 113 | Supply and fix mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n. exc 5cm long complete all as specified and directed. |
| 114 | Material and labour for forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade `A\" complete all as specified anddirected. |
| 115 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. .complete all as specified and directed. |
| 116 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store for keeping in safe custody for reuse complete all as specified and directed. |
| 117 | Material and labour for light/fan point wiring (concealed type) with single core PVCinsulated unsheathedmultistranded FRLSH copper conductor cable of 1100 volts grade size 1.5 sqmm (nominal area) in and including 20mm dia heavy duty rigid non metalic PVC conduit with accessories including modular flush metal boxeswith inner and outer modular cover plates for housingswitches, sockets and regulatorswith all fittings and fixing materials with one single core PVC insulated unsheathed 1.5 sqmm (nominal area) multistranded FRLSH copper conductor as earth continuity wire and connected to earth dolly complete all as specified and directed.Note: (a) Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for Each individual circuit from the distribution board.(b) Quoted rate shall be included for cuttings /chasing the wall and making good disturbed surfaces to fix PVC conduit and flush metal box.(c) Inner and outer modular cover plate shall be included in the quoted rates. |
| 118 | All as per item No. 117.00 here-in-before but for bell/buzzer point controlled by one push button on independent board and -ditto-. |
| 119 | All as per item No. 117.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-. |
| 120 | All as per item No. 117.00 here-in-before but for one five pins 5 Ampssocket outlet point on same board and -ditto-. |
| 121 | All as per item No. 117.00 here-in-before but for 15 amps socket outlet on independent board with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade including 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade as earth continuity conductor and connecting to common earth dollyand -ditto-. |
| 122 | Supply and fix modular switch 1 way 6 amps, 1 module complete all as specified and directed |
| 123 | Supply and fix modular switch 1 way 16 amps, 1 module complete all as specified and directed. |
| 124 | Supply and fix modular bell push 6 amps, 1 module complete all as specified and directed. |
| 125 | Supply and fix bell ding dong AC, 230 Volts, single pole complete allas specified and directed. |
| 126 | Supply and fix modular shuttered sockets 6 amps, 3/5 pin combined two module complete all as specified and directed. |
| 127 | Supply and fix modular shuttered sockets 6/16 amps, 3/5 pin combined two module complete all as specified and directed. |
| 128 | Supply and fix modular fan regulator step type 120W, 2 module complete all as specified and directed. |
| 129 | Supply and fix ceiling rose, 3 terminals, fabricated of PVC/Polycarbonate, isolated body complete all as specified and directed. |
| 130 | Supply and fix in repair 36 W LED recessed ceiling light with glare free uniform illumination, white powder coated CRCA housing, with transulcent frosted diffuser and driver inbuilt 4KV surge protection, efficacy > 100 lm/W, CRI ≥80, 5700K suitable for 600 x 600 mm (2 feet x 2 feet)grid ceiling complete with all accessories including internally prewired connecting upto flexible copper conductor cable of suitable size complete all as specified and directed. |
| 131 | Supply and fix in repair LED tube light fitting 1 x 20W (+/- 5%), 220V, AC with extruded strip in thermally conductive material & extruded housing in optically efficient material milky white with system lumen efficacy > 120 lumen per watt minimum system 2300 - 2400 and chip, Integrated electronic driver, SMD based LED constant current supply with double sided connection to avoid short circuit and surge protection greater than 2.5 KV, IP 20 protection and CRI>80, Power factor > 0.95, THD less than 15%, correlated Colour temperature (CCT) of 6500K, Operating Voltage of 140 V to 270 V, frequency of 50Hz burning hours 50000 hours with comprises of CRCA pre coated metal housing complete all as specified and directed. |
| 132 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 133 | Supply and fix in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete complete all as specified and directed.Note:- Contractor shall deposit the U/S ceiling fan in MES E/M Store without any extra cost. |
| 134 | Material and labour for making hole to the existing brick wall for inserting 40mm G.I pipe including making good to the distributed wall complete all as specified and directed. |
| 135 | Material and labour for galvanised steel tubing of dia 40mm medium grade for hanging of fan with clamp / hook complete all as specified and directed. |
| 136 | Supply and fix in repair sheet metal enclosureSPN DB 8 waysdouble door having facility to fix MCB in incomer and MCBs in outgoing,metal door IP-43type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. |
| 137 | Supply and fix in repair sheet metal enclosureSPN DB 4 waysdouble door having facility to fix MCB in incomer and MCBs in outgoing,metal door IP-43type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed. |
| 138 | Supply and fix in repair MCB SPN, 240 Volts, 40amps, \"C\" series, breaking capacity 10 KA complete all as specified and directed. |
| 139 | Supply and fix in repair MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity \"C\" series complete all as specified and directed. |
| 140 | Supply and fix industrial plug and socket type DB (functional unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified and directed. |
| 141 | Material and labour forconcealed submain wiring comprising single core , 2 run of 6 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1run of 6 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete complete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DB\"s shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. |
| 142 | Supply and fix 200W LED Flood Light made of pressure die cast aluminium housing with integrated polycarbonate IP Lens cover, IP66 protection and system efficacy should be greater than 120 Lumen per watt. Driver should be BIS approved silicon filled potted driver with inbuilt 4KV surge protection device and 10 KV surge protection device in luminare. THD shall be <10%, Power Factor >0.95, CCT 5700K and brand name should be embossed/engraved on the LED fitting for traceability till life complete all as specified and directed. |
| 143 | Supply and fix post top lantern LED type 60 watt, 6500 K230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete incl system efficiency should be greater than 100 lumen per wattDriver should be BIS approved silicon filled potted driver with inbuilt 4 KV surge protection device, THD shall be <10%, power factor >.95, CCT >5700K and brand name should embossed/engraved on the LED fitting for traceability till life complete all as specified and directed. |
| 144 | Material and labour for earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanized iron as steel,protected by 15mm dia GI pipe (medium grade) including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x 6 cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion including taking down existing earthing set complete as specified and directed.Note:- GI wire upto 7.5m including testing shall be included in qouted rates. |
| 145 | Material and labour for earth continuity conductor or main earthing lead with4mm dia GI wire, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or DB\"s / Indoor type LT PBs orany other indicated situation for loop earthing etc complete all as specified and directed |
| 146 | Supply, installation, testing and commissioning of energy rating 5 star, inverter split Air Conditioner capacity 1.5 Ton with indoor and outdoor unit comprising of the following:-(a) Multi-stranded copper conductor wire 4 core, 2.50 Sqmm not less than 3.0 mtrs with copper lugs. (b) Incoming and outgoing high quality copper pipe with foam insulation duly white taped of each size not less than 3.0 mtrs.(c) Key features: -(i) Multi adjustable mode. (ii) High ambient cooling.(iii) Super dry. (iv) Turbo cooling. (v) Anti microbial air filteration. (vi) Eco-friendly refrigerant R-32/ R-410A. (vii) 100% copper. (viii) Sleep mode. (ix) Wide voltage range operation. (x) The ISEER vlaue of Air Conditioner shall be 4.5 (minimum). (xi) Cordless remote - 01 No. |
| 147 | Notes: - (i). Extra copper pipe and multistranded copper conductor wire required for Air Conditioner to be installed on parapet wall of building roof top shall deemed to be included in quoted rate. (ii). Rate for scaffolding/ladder/tools and plants required to install Air Conditioner i.e. for making holes to wall, drilling, making good disturbed surfaces and matching with the existing colour shall deemed to be included in quoted rate.(iii) Outdoor unit should be kept above the level of Indoor unit. For installaiton of ground floor ACs oudoor should be on wall surfaces and for first floor ACs should be on parapet wall of roof top of the building with out extra cost to the Govt all as directed by Engr-in-chrg. (iv) The MES No should be painted on indoor and outdoor unit with navy blue colour letters of size not less than 15 mm height. Drain pipe should be clamped up to plinth protection. No extra claim should be allowed for drain pipe from indoor unit to plinth protection of outside the building.(v) The quoted rates are also inclusive of making holes in brick/stone wall for installation of Air Conditioner and making good tothe exisitng surface with putty and paint in as specified and directed by Engr-in-charge. |
| 148 | Supply and fix voltage stablizer for automatic operation ,single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stablized at 230 V with accuracy 2.5% and of capacity 5 KVA complete all as specified and directed. Make : Volina/ V-Guard / Microtek |
| 149 | Material and labour forconcealed submain wiring comprising single core , 2 run of 4 sqmm nominal cross sectional area, FR-LSHmultistrandedcopper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. in PVC conduit and its fittings complete including provision of 1run of 4 sqmm nominal cross sectional area, FR-LSH multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earthwirecomplete allas specified anddirected.Note :-(a) Cost for extra length of cables / wire required for connection to MCBs/DB\"s shall be included in quoted rates.(b). Cost for cuttings /chasing of wall etc and making good the disturbed surface shall be included in quoted rates. |
| 150 | Supply and fixmounting bracket stand suitable for 1.5/2.0 Ton split AC outdoor unit with nut & bolts complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
