Tender For Repair To Wooden,Steel Furniture Including Polishing & Painting At 13 Brd/16 Brd/31 Mcu And 27 Ed Repair To Steel Furniture Including Painting To Steel Furniture At 27 Ed Af Stn Palam Under Ge (Af) Gurgaon No-1., Gurgaon-Haryana

TDR : 52855831

Tender Notice
BOQ

20 Days Left

Gurgaon , Haryana

Tender Brief : Tender For Repair To Wooden,Steel Furniture Including Polishing & Painting At 13 Brd/16 Brd/31 Mcu And 27 Ed Repair To Steel Furniture Including Painting To Steel Furniture At 27 Ed Af Stn Palam Under Ge (Af) Gurgaon No-1.

Document Fees
₹ 500 /-

EMD
₹ 71000.0 /-

Tender Value
₹ 35.50 Lakhs /-

Submission Date
31-12-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Schedule-A (Wooden Furniture Work)
2	Removal of following existing unserviceable cane/old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion of Chair Diningas applicable as per drg No.FD-279/262/228/FD/MAP-II/05. Work will be executed where the furniture exist in different User Units of GE (P) Air Force Gurgaonincluding BSO\"s Furniture Yard at 13 BRD Palam as directed by Engineer-in-Charge.Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed.
3	Allas per item No 1.01 above but rear Leg
4	Allas per item No1.01 above but back rest
5	Allas per item No1.01 above but leg stiffener .
6	Allas per item No1.01 above but front Rail
7	Allas per item No1.01 above but rear Rail
8	Allas per item No1.01 above but side Rail
9	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
10	Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true \"godrej pattern\" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).
11	All same as per item No. 1.01 above but wooden cleat.
12	Removing the existing unserviceable cane plastic from the chair and supply and fixing PVC seat 4mm thick in lieu of cane after providing corner support and one additional stiffener at centre for support of PVC seat. The PVC seat shall be fixed with proper screws and good workmanship .Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make surface smooth and tidy. The PVC seat shall get approved from BSO and GE before supply. MAKE OF PVC SEAT –AMKO/COMFO or equivalent as approved by GE.
13	All asper Item No 1.00 here -in- before but CHAIR WRITING,FD-261/280/250 :-
14	Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed.
15	Allas per item No 2.01 above but rear leg .
16	Allas per item No 2.01 above but Back rest
17	Allas per item No 2.01 above but Leg Stiffener
18	Allas per item No 2.01 above butwooden cleat
19	Allas per item No 2.01 above but side Rail
20	Allas per item No 2.01 above but back rail
21	Allas per item No 2.01 above but Arm rest
22	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
23	Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true \"godrej pattern\" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).
24	All asper Item No 1.00 here -in- before but TABLE DINING FOR 6 PERSONS:-FD/MAP-II/03:-
25	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (MakeAction tesa, Century, Green panel).
26	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one per drg without damaging the other parts.
27	Long rail : All same as per item No 3.02 above but long rail for table dining 6 per.
28	Short rail : All same as per item No 3.02 above but short rail for table dining 6 per.
29	L-shape corner of flat iron 4\" x 4\" to the Table between legs and rail to be fixed with screw.
30	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
31	Hard rubber shoes standard quality as per drg.
32	All same as per item No 3.02 above but wooden cleat
33	All asper Item No 1.00 here -in- before but TABLE DINING FOR 8 PERSONS:-FD-273 / 239:-
34	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
35	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one per drg without damaging the other parts.
36	Long rail : All same as per item No 4.02 above but long rail for table dining 8 per.
37	Shor rail : All same as per item No 4.02 above but short rail for table dining 8 per.
38	L-shape corner of flat iron 4\" x 4\" to the Table between legs and rail to be fixed with screw.
39	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
40	Hard rubber shoes standard quality as per drg.
41	All as per Item No 1.00 here -in- before but TABLE WRITING:-FD-249 & 275:-
42	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
43	Supply and fixing of sides and bottom of cup board : Itshall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg .
44	Supply and fixing of shutters complete with knob and lock : shuttershall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shadeas per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.
45	Supply and fixleg in repairmade out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed.
46	Allas per item No 5.04 above but long rail .
47	Allas per item No 5.04 above but Long stiffener.
48	Allas per item No 5.04 above but Short rail
49	Allas per item No 5.04 above but bottom rail of table writing.
50	Supply and fixing of back of cup board : Itshall be made out of 6mm thick plywood BWR grade confirming to IS as approved to be fixed as shown on drg .
51	Supply and fixing of partition of the cupboard : Itshall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and as approved and all as directed by Engr-in-charge.
52	Drawer made of 16 mm thick plywood BWPgradewith bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front &sidesand bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick(Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.
53	Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE.
54	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
55	All asper Item No 1.00 here -in- before but TABLE DRESSING GENTSFD- 230:-
56	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
57	All same as per item No 5.04 above but side of table dressing gents.
58	All same as per item No 5.04 above but bottom of table dressing gents .
59	Mirror : S & F mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots duly french polished. Mirror shall be of electro copper plated polished sheet glass 6 mm thick Make- Saint Gobain/Modiguard. Suitable rawl plugheavy duty as per drg 2 Nos shall be provided to the back of the mirror for hanging. Back of the frame shall be of plywood commercial 6mm thick BWR grade confirming to IS as approved and as shown on drg.
60	Back : Back shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade Make-Greenlam/WINTUFF/TESA in one piece after removing the old one. suitable rawl plug as per drg 2 Nos shall provided to the back for hanging .
61	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
62	All asper Item No 1.00 here -in- before but TABLE DRESSING LADIESFD/MAP-II/07:-
63	Back : All same as per item No 5.04 above but back of table dressing ladies.
64	Side : All same as per item No 5.04 above but suitable for Table dressing ladies with mirror as per the drg.
65	Bottom : All same as per item No 5.04 above but back of table dressing ladies.
66	Drawer with Handle and telescopic channel :All same as per item No 16.04 above but suitable for Table dressing ladies with mirror as per the drg.
67	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
68	Supply and fix of mirror : All same as per item No 5.04 above but suitable for Table dressing ladies with mirror as per the drg.
69	Taking out old pressed /torn old cushions from stooland Supply 75mm foamcushion and 40 densitythick foam cushion (Make- Sleepwell/Dureo Flexs/Godrej) of suitable for stool dressing duly covered with good quality swed tapestry all over(Not less than Rs 200 per metre)cloth of approved color and shade by GE, Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.(Sleepwell and Kurloan)
70	Taking out old torn/ faded cushion cover fromfoam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best qualityswed tapestry cloth ( Not less than Rs.200 per meter) as approvedby GE complete , Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.
71	Long Stiffener : It shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable no of screw wood steel.
72	Short Stiffener : All same as per item no. 5.04 above but short stiffener of table dressing ladies.
73	Leg : All same as per item no. 5.04 above but legof table dressing ladies.
74	CP steel 100mm long handle to the drawers & shutter of table dressing ladies placed in position as shown in drg.
75	50mm dia swivel type castors wheel for stool dressing.
76	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
77	All asper Item No 1.00 here -in- before but SOFA SET 5 SEATER,(2 Single seater and One 3seater,10Nos cushion in each set) FD/MAP-II/02 and All TP Sofa 5 seater set (2 seater, 3 seater & single seater)
78	Leg
79	Arm
80	wooden batten
81	Teak wood bearer
82	Taking out old pressed /torn old cushionsand Supply 40 density thick foamcushion of size 21”x22”x4” (Make- Sleepwell/Deuroflexs/Godrej ISI Mark) duly covered with good quality suede tapestry all over(Not less than Rs 380 per metre) cloth of approved color and shade by GE (Sample of cloth is kept with Enginner-In-Charge), Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C.
83	Taking out old torn/ faded cushion cover fromfoam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best qualitysuede tapestry cloth ( Not less than Rs.450 per meter) as approvedby GE complete , Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C.
84	Scratching the entire wooden pallets of sofa3 seater , filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.
85	Scratching the entire wooden pallets of sofa single seater, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.
86	All asper Item No 1.00 here -in- before butHAT STAND WITH MIRROR,FD-233:-
87	Supply and fix of beading : Beading made out of well seasoned teak wood size 35x6mm all around shall be provided to the frame of hat stand as shown on drg .
88	Supply and fix of plywood : Plywood 4mm thick commercial Make- Green ply confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the back side of hat stand all as shown on drg and as directed by Engr-in-charge .
89	Supply and fix of plywood : Plywood one side teak face 4mm thick commercialconfirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand all as shown on drg .
90	Supply and fixingof peg : Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long as shown on drg .
91	Supply and fix of looking Mirror : Looking Mirror size 440x300x6mm of approved quality make-Modi guard/Saint Gobain/Swastic duly fixed with beading size 35x6mm made out of well seasoned teak wood duly finished as shown on drg .
92	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
93	All asper Item No 1 here -in- before but Table 3\"X2\"with / without Drawer: FD-/284/283/291/288 or simillar
94	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
95	Legsas per drg
96	Top long rail as per drg
97	Top Short rail as per drg
98	CenterStiffener as directed by EIC
99	Short stiffener as per drg
100	MS right angle /corner shallbe provided to each legs as per samplerestall as directed by EIC/GE.
101	Shoes as sample
102	Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.
103	All as per Item No 1.00 here -in- before but TV TROLLEY , FD/E6/MAP/04 (R):-
104	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
105	Sides
106	Baes/Shelves
107	5.5mm thick plain glass with magnetic catchers.
108	50mm dia swivel type castors wheel.
109	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
110	All asper Item No 1.00 here -in- before but TEAPOY WOODEN,FD- 382:-
111	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
112	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one as per drg without damaging the other parts.
113	All same as per item No 12.02 above but long rail for teapoy.
114	All same as per item No12.02 above but shortrail for teapoy.
115	: All same as per item No12.02 above but stiffener for teapoy.
116	Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE.
117	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
118	All asper Item No 1.00 here -in- before but TABLE CENTRE ,FD-274:-
119	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
120	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one per drg without damaging the other parts.
121	Long rail : All same as per item No 2.02 above but long rail for table centre.
122	Shor rail : All same as per item No 2.02 above but short rail for table centre.
123	Stiffener: All same as per item No 2.02 above but short rail for table centre.
124	Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE.
125	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
126	All asper Item No 1.00 here -in- before but SIDE BOARD :FD-1112:-
127	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
128	All as specified above item No 8.01 above but for bottom of side board
129	All same as per item No 8.01 done but sides for side board.
130	Supply and fix of back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece.
131	Supply and fixing of shutters complete with knob and lock : shuttershall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shadeas per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.
132	Drawer with handle : Drawer shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shadeas per drg and provided with recessed handle of best quality as approved. Bottom of drawer shall bemade of one side melamine faced pre-laminated MDF board 6mm thick .
133	Leg shall be made of well seasoned teak wood free from cracks and knots cutto size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable groving with long/short frame .
134	All same as per item No 8.07 above but long stiffener.
135	All same as per item No 8.07 above but Short stiffener.
136	CP steel 100mm long handle to the drawers & shutter of Bin Linenmulti purpose placed in position as shown in drg.
137	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
138	All asper Item No 1.00 here -in- before but TABLE PEG ,FD-384:-
139	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
140	Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one as per drg without damaging the other parts.
141	All same as per item No 9.02 above but long rail for Peg table.
142	All same as per item No 9.02 above but shortrail for Peg table.
143	All same as per item No 9.02 above but stiffener for Peg Table.
144	Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE.
145	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
146	All as per item No 1.00here-in -before but Servicing Table 10\"x4\"x2\".6\", (TP)
147	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
148	Leg
149	Long rail
150	Short rail
151	L-shape corner of flat iron 38x3mm 4\" x 4\" to the Table between legs and rail to be fixed with screw.
152	Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.
153	All asper Item No 1.00 here -in- before but CHAIR EASY,FD-229/358:-
154	Supply and fix front legmade out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed.
155	Allas per item No 19.01 above but rear leg .
156	Allas per item No 19.01 above but Rail seat
157	Allas per item No 19.01 above but Stiffener
158	Allas per item No 19.01 above but Back rest
159	Allas per item No 19.01 above but Arm rest
160	Allas per item No 19.01 above but fillets for caning seat and back .
161	All same as per item No. 19.01 above but wooden cleat.
162	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
163	Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true \"godrej pattern\" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).
164	All asper Item No 1.00 here -in- before but CHAIR DINING LONG BACK/ OFFICERS ,FD/E6/MAP/10 or similar
165	Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed.
166	Allas per item No 18.01 above but rear Leg
167	Allas per item No18.01 above but back rest
168	Allas per item No18.01 above but leg stiffener ./ vertical stiffner
169	Allas per item No18.01 above but front Rail
170	Allas per item No18.01 above but rear Rail
171	Allas per item No18.01 above but side Rail
172	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
173	seat made of 10mm thick BWR plywood over which 40 density cushion (Make- Sleepwell/Dureo Flexs/Godrej) foam 75mm thick shall be provided duly covered with best quality swed tepestry cloth (Not less than Rs 200 per metre )as approved bt BSO.
174	All same as per item No. 18.01 above but wooden cleat.
175	Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM)as apporoved and directed by in Engr charge.
176	All asper Item No 1.00 here -in- before but Wooden BED PLY TOP:FD-246 & TP:-
177	Supply and fix of Long rail : long rail shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one per drg without damaging the other parts.
178	Supply and fixleg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed.
179	Head Rest : All same as per item No 19.01 above
180	Foot rest : All same as per item No 19.01 above
181	12 mm commercial BWR Grade ISI ply placed in position as shown in drg.(Century ply\"\"Sainik 710/Greenply\" Green gold\"/Archidply\" Platinum\"/Duroply\"titanium\"))
182	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
183	All as per item No 1.00here-in -before but Table office officer (TP)
184	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior grade in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
185	Leg
186	Long rail
187	Short rail
188	L-shape corner of flat iron 38x3mm 4\" x 4\" to the Table between legs and rail to be fixed with screw.
189	Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.
190	All asper Item No 1.00 here -in- before butTABLE OFFICE CLERK WOODEN FD-321, DB-4120:-
191	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
192	Supply and fixlegmade out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed.
193	All same as per ser item No. 21.02 above butrail.
194	Repair to shutter of table by providing hinges .
195	Drawer made of 16 mm thick plywood BWPgradewith bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front &sidesand bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick(Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.
196	Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.
197	Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part in-tact and painting the disturbed portion of Almirah Steel Med Complete all as specified and as applicable as drawings,FD-1032. NOTE : Work will be executed where the furniture exist in different User Units of GEAir Force Gurgaon No 1including 27 ED & 13 BRD BSO\"s Furniture Yard as directed by Engineer-in-Charge:-
198	Removing of unserviceable and worn out legs and providing new legs made out of 1mm thick MS sheetfabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.
199	Removing of unserviceable shelves and providing new shelves made out ofMS sheet 1.00mm thick with fixing brackets of existing type almirah Med steel complete all as specified and directed.
200	Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shapeAlmirah Med steel. (Drg No FD-1032) complete all as specified and directed.
201	Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H medium (Drg No FD-1032) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.
202	All as per item No 22.03 above but locks (6 levers ) of make link or Harrison approved by GE.
203	All as per item No 22.03 above but CP handle with bolt.
204	All as per item No 22.03 above but mild steel locking rod.
205	All as per item No 22.03 above but locking box / device
206	Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repairinside/out side with Spray painting (Hammer tone/Normal) duly matched with existing surfaces or as directed by Engr-in-charge.
207	Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repairinside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.
208	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repairout side only with painting Spray duly (Hammer tone) matched with existing surfaces or as directed by Engr-in-charge.
209	All as per item No 22.00here-in -before but ALMIRAH LARGE STEEL FD-67(M)/350 /1031:-
210	Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheetfabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.
211	Removing of unserviceable shelves and providing new shelves made out ofMS sheet 1.00mm thick with fixing brackets of existing type almirah large steel complete all as specified and directed.
212	Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shapeAlmirah large steel. (Drg No FD-1031) complete all as specified and directed.
213	Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H Large (Drg No FD-1031) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.
214	All as per item No 23.02 above but locks (6 levers) of make link or Harrisonas approved by GE.
215	All as per item No 23.02 above but CP handle with bolt.
216	All as per item No 23.02 above but mild steel locking rod.
217	All as per item No 23.02 above but locking box / device
218	Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repairinside/out side withSpray painting (Hammer tone)duly matched with existing surfaces or as directed by Engr-in-charge.
219	Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repairinside only with Spray painting (Hammer tone)duly matched with existing surfaces or as directed by Engr-in-charge.
220	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repairout side only with painting Spray (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.
221	All as per item No 22.00here-in -before but TABLE COMPUTER, FD/E6/MAP/03,TP
222	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
223	Key board tray of table with telescopic chanel
224	Remove UNSV Telescopic chanel and fixing of New telescopic chanel
225	Drawer of table with telescopic chanel
226	Shelves of table
227	vertical side shelf
228	Knob
229	Paintingwith one coat of black synthetic enamel paint to complete table etc. all as specified and directed.
230	All as per item No 22.here-in -before but BOOK CASE STEEL- FD-1028/356/TP
231	Applying one coat of synthetic enamel paint olive green/Grey including preparation of old painted surfaces after necessary denting to Book case steel shown on drg (FD-1028) complete.
232	Lock 4/5 levers godrej pattern, including two keys and including removing of unserviceable lock from Book case steel shown on drg (FD-1028) complete.
233	Handle steel chromium plated size- 100mm long including removing of unserviceable handle steelfrom Book case steelshown on drg (FD-1028) complete.
234	Glass pane 3mm thick including removing of unserviceable/broken glass panefrom Book case steelshown on drg (FD-1028) complete.
235	All as per item No 22here-in -before but RACKSTEEL Adjustable open type,FD-1038/TP
236	Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.
237	Sides to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.
238	Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.
239	One coat of synthetic smoke grey paint on all steel portion of rack complete.
240	All as per item No 22.here-in -before but CHAIR COMPUTER/Revolving FD/E6/MAP/01/TP
241	Removing unserviceable damaged Seat & back of Chair computer, supply and upholstered with crape fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mmthick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge
242	Removing old unserviceablearm rest of chair computerand S&F new one made of black integral skin polyurethane with 75-85 shore \"Á \" hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.
243	Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computerall as directed
244	Removing unserviceablehydrolic lift suitable for chairr all as specified and directed by Engr -in charge.
245	Removing of old unsv tapestry cloth and supply and fixs new crape cloth (rate should not be less than INR 120/- per RM)as apporoved and directed by in Engr charge.
246	All as per item No 22.here-in -before but CHAIR VISITOR ,TP MAKE GEEKAEN / E S C / GODREJ / ETC
247	Removing unserviceable damaged Seat & back of Chair visitor. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.
248	Painting the entire frame with one coat of synthetic enamel paint 1st quality including preparation of surfaceof chair writing officers including handle all as directed by Engr -in -charge.
249	Removing old unserviceablearm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore \"Á \" hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.
250	Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM)as apporoved and directed by in Engr charge.
251	Removing old broken rubber stopper of the chairs and S&Fnew Rubber stopperat bottom all as directed and specified by Engr -in -charge
252	All as per item No 22.00here-in -before but CHARPOY IP WITH HARD TOP ,FD/MAP-II/01
253	12 mm commercial BWR Grade ISI ply placed in position as shown in drg.(Century ply\"\"Sainik 710/Greenply\" Green gold\"/Archidply\" Platinum\"/Duroply\"titanium\"))
254	Rubber shoes of high quality placed in position as shown in drg.
255	Scratchingof scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required andrepair with painting duly matched with existing surfaces.
256	All as per item No 22 here-in -before but CHAIR REVOLVING HIGH BACK)TPMAKE GEEKAEN / E S C / GODREJ / ETC
257	Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair complete all as specified and all as directed by Engr-in- Charge.
258	Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.
259	Removing the old unserviceable complete pedestal assembly along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of two wheel coasters for smooth running of chairs and shall have gas lift mechanism complete all as specified and all as directed by Engr-in- Charge.
260	Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM)as apporoved and directed by in Engr charge.
261	Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computerall as directed.
262	All asper Item No 22 here -in- before but SOFA single seater/ two seater/three seater chrome plated arms andlegs (TP)MAKE GEEKAEN / E S C / GODREJ / ETC
263	Continuous Gas welding as required & Nut bolt .
264	Taking out old pressed /torn old cushionsfron sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H)and Supply 40 density thick foamcushionduly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.
265	Taking out old pressed /torn old cushionsfron sofa two seater of size 1870 mm (L)x 800 (D) x 815 mm (H)and Supply 40 density thick foamcushionduly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.
266	Taking out old pressed /torn old cushionsfron sofa three seaterof size 2110(L)x 965(D) x 825(H) and Supply 40 density thick foamcushionduly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.
267	Taking out old torn/ faded cushion leatherite cover fromfoam cushions of sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H) and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approvedby GE complete . All as specified and directed by Engr-In-charge
268	Taking out old torn/ faded cushion leatherite cover fromfoam cushions of sofa two seater 1870 mm (L)x 800 (D) x 815 mm (H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approvedby GE complete . All as specified and directed by Engr-In-charge.
269	Taking out old torn/ faded cushion leatherite cover fromfoam cushions of sofa three seater 2110(L)x 965(D) x 825(H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approvedby GE complete . All as specified and directed by Engr-In-charge
270	All as per item No 22.00here-in -beforebut CHARPOY GI PIPE,FD-220:-
271	Taking out existing unserviceable plywood from charpoy, dismantling the unserviceable parts like GI elbow, GI check nuts, GI pipe and tightening the same with new parts(supplied in succeding items in schedule), supply and fixing of plywood 12mm thick 5 ply of size 1.98x0.93mtr BWR Grade ISI confirming to relevant ISwith 3 Nos stiffnerand 50mmX5mmX930mm fixingwith nut and bolt6mm dia complete along with painting all as specified and directed by Engineer-in-Charge. (Make : Century ply\"\"Sainik 710/Greenply\" Green gold\"/Archidply\" Platinum\"/Duroply\"titanium ).
272	Supply only GI 3 way elbowISI marked of size 32mm bore weight not less than 400 gms each complete all as specified and directed by Engineer-in-Charge. (Make : ARE).
273	Supply only GI check nut6mm thick weight not less than 35 gms each complete all as specifed and directed by Engineer-in-Charge.
274	Supply only long rail of charpoys GI pipe long rail made out of 32mm bore GI pipe medium grade confirming to IS : 1239 Part-I of length 1.9 mtrs duly threaded one side upto 25mm long at end and other side to 50 mm long at end complete all as specified and directed by Engineer-in-charge. (Make: Jindal).
275	Converting long rail into short Rail (Obtain from Ser No 20.04 above) makingthreads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.
276	Converting short railinto leg (Obtain from Ser No 20.05 above) makingthreads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.
277	Supply only MS Flat 920x40x5 mm duly painted black colour after primer coat complete all as specified and directed. (Make:Jindal).
278	All as per item No 22 .00here-in -before but LOCKER BED SIDE STEEL ,FD-127(M)/257/1029
279	Continuous Gas welding as required .
280	Taking down existing unserviceable hasp and staple from locker steel. Supply and fix in replacement hasp and staple aluminium ISI marked size 75x40x3mm to shutter as shown on drg.
281	Supply and fixing CP socket in replacement suitable bracket and stappled socket open at one end as approved complete all as specified anddirected.
282	All as per item No 22.02 above butaluminium handle 100mm long ISI marked as approved.
283	All as per item No 22.02 above but supply and fix in replacement MS butt hinges as per existing size.
284	All as per item No 22.02 above but hangighrod conduit pipe stainless steel 20mm bore 1.6 mm thick as approved by Engr-in-charge. Length of conduit shall be as per drg.
285	Material and labour for removing unserviceable shutter and providing new shutter usingMS sheet 1.00mm thick as per existing shape of locker steel complete all as specified and directed.
286	Removing of unserviceable and worn out legs and providing new legs made out of 1.00mm thick MSsheetfabricated to shape as per existing locker steel complete all as specified and directed.
287	Removing of unserviceable shelves and providing new shelves made out ofMS sheet 1.00mm thick with fixing brackets of existing type locker steel complete all as specified and directed.
288	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repairinside/out side with painting duty matched with existing surfaces
289	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repairinside side only with painting duty matched with existing surfaces
290	Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repairout side only with painting duty matched with existing surfaces
291	All as per item No 22.00here-in -before but TABLE OFFICE CLERK STEEL: FD-84, 381, 1003 & 1004.
292	Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg.
293	Removing of unserviceable lock and supplying and fixing new lock 32 to 55 mm size with duplicate keys and necessary screws etc (Lock should be ISI Marked).
294	Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer.
295	Stiffeners as per drg.
296	Supply and fix suitable PVC shoes of superior qualityfor legs for table office cleark steel.
297	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
298	Replacement of worn out conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shownon drg . (welding points shall be measured and paid separately.
299	Mig welding of broken joints MS members (Square / tabular) for legs for table .
300	Carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed.
301	All as per item No 22.00here-in -before but TABLE OFFICE OFFICER STEEL: FD-84/ 1002/1003.
302	Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg
303	Material and labour for removing of unserviceable lock and supplying and fixing new lock 32 to 55mm size with duplicate keys and necessary screws etc (lock should be ISI marked).
304	Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer.
305	Stiffeners as per drg
306	Supply and fix suitable PVC shoes of superior qualityfor legs for table office officer steel.
307	Supply and fix in replacement shutter made out of 1.00mm thick MS sheet made to shape as per drg.
308	Material and labour for removing of unserviceable lock and supplying and fixing new lock 32 to 55mm size with duplicate keys and necessary screws etc (lock should be ISI marked).
309	Material and labour for replacement of worn out conduit MS 25mm Sq pipe 16 gauge wherever required as directed and fixing as shown on drg.( Note - welding points shall be measured and paid separetly).
310	Material and labour for MIGwelding of broken joints MS members (square / tubular ) for MS conduit 25 Sq mm square pipe.
311	Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).
312	Material and labour for carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed.
313	All as per item No 22.here-in -before but Rack Storage steel 6\"-3\"x3\"x2\" & TP
314	Back to rack storage steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.
315	Sides to rack storage steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.
316	Shelves to rack storage steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.
317	One coat of synthetic smoke grey paint on all steel portion of rack complete.
318	All as per item No 22.here-in -before but RACKUniversal SS 2150x1300x400mm Model- NKL
319	Back to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.
320	Sides to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.
321	Shelves to rack Univeral SS steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.
322	One coat of synthetic smoke grey paint on all steel portion of rack complete.
323	All as per item No 22.00here-in -before but CHAIR STEEL TUBULAR WITH ARMS :FD-75(M)
324	Scratching the entire frame of chair and applying desired coat of synthetic enamel olive green/steel grey paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.
325	02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the seat complete all as specified and all as directed by Engr-in- Charge.
326	Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers.
327	Second class Hard wood Arm rest as per drg
328	Hard rubber shoes as per drg
329	Rubber cap for conduit pipe as per drg
330	Note:- The amount of Rs 10262 against Schedule of Crediton Srl Page 168 to 173 shall be deducted from the total amount quoted against Sch \"A\"

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Haryana Tenders

Furniture Tenders

Furniture Items Tenders

Steel Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair To Wooden,Steel Furniture Including Polishing & Painting At 13 Brd/16 Brd/31 Mcu And 27 Ed Repair To Steel Furniture Including Painting To Steel Furniture At 27 Ed Af Stn Palam Under Ge (Af) Gurgaon No-1., Gurgaon-Haryana

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair To Wooden,Steel Furniture Including Polishing & Painting At 13 Brd/16 Brd/31 Mcu And 27 Ed Repair To Steel Furniture Including Painting To Steel Furniture At 27 Ed Af Stn Palam Under Ge (Af) Gurgaon No-1., Gurgaon-Haryana

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us